FS: 05 VQ35DE & 6 spd tranny (non-hlsd)
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
FS: 05 VQ35DE & 6 spd tranny (non-hlsd)
I bought this with the intent of swapping it into my 4th gen but I totalled that and ended up buying an 02 maxima with a 6spd tranny.
In either case I have a VQ35 with 6 spd tranny out of an 05 maxima. They have just under 59k miles.
I also have almost all parts needed for the swap into a 4th gen. The project had got put on hold so i don't quite remember off the top of my head everything i have. But when i get some more time i'll take more pics. as for now here is a pic of the engine and tranny. I took off the IM because I was planning on doing the ssim mod but again never got around to it.
Anyway, I'm looking for $1800+ shipping

Update on the parts I have:
05 engine/cover (also has a portion of the exhaust manifold which has all 4 O2 sensors)
05 6psd transmission w/starter, slave cylinder, flywheel, (and obviously the used clutch that's in the tranny)
05 6spd axles
05 shifter assembly/cables (no shifter trim)
brake pedal
gas pedal
clutch pedal
03 immobilizer/key
02/03 engine harness
02/03 dash harness (trimmed, was in process of creating the patch harness)
6spd transmission & frame mount
pinion assembly (Vehicle Speed Sensor mount)
02/03 SE gauge cluster (manual)
In either case I have a VQ35 with 6 spd tranny out of an 05 maxima. They have just under 59k miles.
I also have almost all parts needed for the swap into a 4th gen. The project had got put on hold so i don't quite remember off the top of my head everything i have. But when i get some more time i'll take more pics. as for now here is a pic of the engine and tranny. I took off the IM because I was planning on doing the ssim mod but again never got around to it.
Anyway, I'm looking for $1800+ shipping

Update on the parts I have:
05 engine/cover (also has a portion of the exhaust manifold which has all 4 O2 sensors)
05 6psd transmission w/starter, slave cylinder, flywheel, (and obviously the used clutch that's in the tranny)
05 6spd axles
05 shifter assembly/cables (no shifter trim)
brake pedal
gas pedal
clutch pedal
03 immobilizer/key
02/03 engine harness
02/03 dash harness (trimmed, was in process of creating the patch harness)
6spd transmission & frame mount
pinion assembly (Vehicle Speed Sensor mount)
02/03 SE gauge cluster (manual)
Last edited by hacim105; Jun 9, 2009 at 09:50 AM.
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
I would prefer to sell it all together seeing as the engine and tranny are still connected. It would be easier to sell everything to just one person. But just give it a little time, if there is no interest I'll split them up.
Or if I can find someone interested in the engine and another interested in the tranny at the same time I will split them up as well.
Or if I can find someone interested in the engine and another interested in the tranny at the same time I will split them up as well.
Last edited by hacim105; Apr 29, 2009 at 07:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
6spd4dsc
5th Generation Classifieds (2000-2003)
4
Mar 4, 2016 05:19 PM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
8
Oct 18, 2015 06:57 PM
ef9
4th Generation Maxima (1995-1999)
10
Oct 4, 2015 08:43 AM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 04:58 AM




