FS: VQ35, 6spd transmission, Emanage Ultimate, MEVI, etc.
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
FS: VQ35, 6spd transmission, Emanage Ultimate, MEVI, etc.
Well I've had these parts for about awhile now since i totalled my 96 maxima just over a year ago. I was hoping to do some testing on my friends 97 maxima with the MEVI but I just have not ever found the time and it looks like i probably never will.
So I have the following parts for sale:
VQ35 - sold
6 spd tranny - sold
Emanage Ultimate - sold
patch harness 95/96 MT maximas - sold
MEVI (extrude honed) - $475 shipped
(you'll notice that i have fittings attached to the runners, this was because I was switching from MAF to MAP sensor. before the car wreck I was working on an idea of trying to make the MEVI work somewhat as an ITB hybrid intake. unfortunately I kept getting back tracked by other car problems and what not so I never had the opportunity to finish it. in any case you can just put a cap over the end of the fitting or if you really don't like it I can get the holes welded.) additionally, as far as extrude honing goes, this increased my track time by .1 in the 1/4 mile. My fastest time before the extrude honing was 15.38, after the EH my fastest time was a 15.26, so it was a great mod, pricey but I enjoyed it.
So I have the following parts for sale:
VQ35 - sold
6 spd tranny - sold
Emanage Ultimate - sold
patch harness 95/96 MT maximas - sold
MEVI (extrude honed) - $475 shipped
(you'll notice that i have fittings attached to the runners, this was because I was switching from MAF to MAP sensor. before the car wreck I was working on an idea of trying to make the MEVI work somewhat as an ITB hybrid intake. unfortunately I kept getting back tracked by other car problems and what not so I never had the opportunity to finish it. in any case you can just put a cap over the end of the fitting or if you really don't like it I can get the holes welded.) additionally, as far as extrude honing goes, this increased my track time by .1 in the 1/4 mile. My fastest time before the extrude honing was 15.38, after the EH my fastest time was a 15.26, so it was a great mod, pricey but I enjoyed it.
Last edited by hacim105; Jun 20, 2010 at 09:13 PM.
Junior Member
Joined: Aug 2007
Posts: 44
From: Renton, WA
To check if your transmission is HLSD, look through the diff where the axles go, if you CAN see all the way through it no problem, then IT IS HLSD, If you CAN NOT see through it, and there is a bar through it, then it is open diff...
I may be interested in the trans if it is HLSD...
I may be interested in the trans if it is HLSD...
Thread Starter
Joined: Jul 2002
Posts: 2,063
From: Reno, NV
6spd Clutch, brake and gas pedals - sale pending
05 Shifter assembly - sale pending
6spd frame transmission mount - sale pending
05 Shifter assembly - sale pending
6spd frame transmission mount - sale pending
Last edited by hacim105; Jun 3, 2010 at 12:27 PM.
YOOO DIBS ON THE CLUTCH PEDAL, AND TRANSMISSION MOUNT!!! PAYPAL ADDY? I GOT YOU!!
edit: dammit! i wish you would have had that shifter assembly fs earlier!
happen to have the clutch master/slave cylinder?
edit: dammit! i wish you would have had that shifter assembly fs earlier!
happen to have the clutch master/slave cylinder?
Last edited by My-Body-Is-Ready; May 27, 2010 at 11:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
Jun 6, 2017 02:01 PM
KabirUTA13
5th Generation Classifieds (2000-2003)
19
Oct 17, 2015 02:15 AM
Need help
5th Generation Maxima (2000-2003)
23
Oct 2, 2015 08:56 AM
Pied
4th Generation Maxima (1995-1999)
0
Sep 26, 2015 03:29 PM