Clearing the Tail Lights..
#1
Clearing the Tail Lights..
BEFORE YOU GET MAD BECAUSE I DIDNT USE THE SEARCH: I did use the search, and came up with people asking how to and then happy as hell when they are done.. that doesn't help.. I've searched the web, cardomain.com, and of course the max.org.. I havn't found anything with alot of helpful instruction.
I believe my 97se has one piece tail lights.. I already took them off and tried taking them apart. there was black tar stuff all over the damn place and I couldn't get that black housing off the back of them. I don't wanna break them, so if someone knows an address that shows pic's and gives instrucitons on doing this, please help!
Snooter
I believe my 97se has one piece tail lights.. I already took them off and tried taking them apart. there was black tar stuff all over the damn place and I couldn't get that black housing off the back of them. I don't wanna break them, so if someone knows an address that shows pic's and gives instrucitons on doing this, please help!
Snooter
#2
www.maximadriver.com has instructions.
You should have seen that in the search. I used to have a webpage up with step -by - step instructions with a picture for each step, but I forgot to save everything when I cancelled the site.
You have to heat up the housing to get to the taillight. Either use a heat gun or a place the tailight in an oven.
http://www.brianv.net/mods/taillights/
look there too
You should have seen that in the search. I used to have a webpage up with step -by - step instructions with a picture for each step, but I forgot to save everything when I cancelled the site.
You have to heat up the housing to get to the taillight. Either use a heat gun or a place the tailight in an oven.
http://www.brianv.net/mods/taillights/
look there too
#6
Originally posted by NickStam
yes, you have 100% permission to put them up. I miss them !!!!!!!!!!
yes, you have 100% permission to put them up. I miss them !!!!!!!!!!
#12
Originally posted by triax37
Dude, stop post-whoring. I've just read 3 pointless posts in the last 5 minutes.
Great. Now I'm making pointless posts.
Dude, stop post-whoring. I've just read 3 pointless posts in the last 5 minutes.
Great. Now I'm making pointless posts.
#14
#19
I mean I put a link to your instructions on my page.. I gave props for your instructions on there though.. check it out!
I hope I got the right clear plastic stuff. The one I got seems kinda thick but it is really flimsy! I guess we'll see..
I hope I got the right clear plastic stuff. The one I got seems kinda thick but it is really flimsy! I guess we'll see..
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM