Does anybody know what this code goes to?
09-20-2002, 12:43 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 2,084
Does anybody know what this code goes to?
I got the dreaded CEL yesterday. Pulled the code, 0806. According to the decoder, it goes to the EVAP canister control valve/solenoid.
Does anybody know what in the heck that is? Please advise.
Does anybody know what in the heck that is? Please advise.
09-20-2002, 12:45 PM
#2
09-21-2002, 09:22 AM
#3
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 2,084
09-24-2002, 08:23 AM
#4
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 2,084
I read the search link, and I have the basic idea.
One more question though, where is the solenoid located. Dave mentioned briefly that is was "on top of the engine", but where? What does it look like? Does anyone have any pics or links for me to see what it looks like before I start taking things off and spraying them down with WD-40? Please advice, my CEL is back on again and I want to take care of this problem right away. Thanks in advance for your help.
One more question though, where is the solenoid located. Dave mentioned briefly that is was "on top of the engine", but where? What does it look like? Does anyone have any pics or links for me to see what it looks like before I start taking things off and spraying them down with WD-40? Please advice, my CEL is back on again and I want to take care of this problem right away. Thanks in advance for your help.
09-24-2002, 11:14 AM
#5
Senior Member
Join Date: Aug 2001
Posts: 1,437
whats up Jaime?
I threw the same code as well. It is usually associated with the knock sensor i believe. The EVAP canister is located behind the drivers side rear wheel and it is a Black box the is about 12x6". It has a bunch of hoses coming out of it as well.
MY question is that i threw the EVAP sensor and where is that located? There is some type of open/close valve that is attached to the box and that can be removed.
Let me know if you find out anything... becasue i need to replace mine. I have heard that they run around $80.00,but not for certain.
I threw the same code as well. It is usually associated with the knock sensor i believe. The EVAP canister is located behind the drivers side rear wheel and it is a Black box the is about 12x6". It has a bunch of hoses coming out of it as well.
MY question is that i threw the EVAP sensor and where is that located? There is some type of open/close valve that is attached to the box and that can be removed.
Let me know if you find out anything... becasue i need to replace mine. I have heard that they run around $80.00,but not for certain.
09-24-2002, 11:29 AM
#6
Originally posted by JAIMECBR900
I read the search link, and I have the basic idea.
One more question though, where is the solenoid located. Dave mentioned briefly that is was "on top of the engine", but where? What does it look like? Does anyone have any pics or links for me to see what it looks like before I start taking things off and spraying them down with WD-40? Please advice, my CEL is back on again and I want to take care of this problem right away. Thanks in advance for your help.
I read the search link, and I have the basic idea.
One more question though, where is the solenoid located. Dave mentioned briefly that is was "on top of the engine", but where? What does it look like? Does anyone have any pics or links for me to see what it looks like before I start taking things off and spraying them down with WD-40? Please advice, my CEL is back on again and I want to take care of this problem right away. Thanks in advance for your help.
09-24-2002, 12:20 PM
#9
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 2,084
Originally posted by bags533
Factory Service Manual
Factory Service Manual
09-25-2002, 11:10 AM
#10
Senior Member
Join Date: Aug 2001
Posts: 1,437
i went to town center Nissan and they said my sensor is only $42.00. I am getting it tomorrow after i get paid
while i am there i will see how much your solenoid is. I have heard that they have the cheapest prices on parts right now.
while i am there i will see how much your solenoid is. I have heard that they have the cheapest prices on parts right now.
09-25-2002, 11:16 AM
#11
Guys I had the same code dealing with the EVAP Solenoid and Purge valve (0807). Check if there is anything blocking the smallest hose/tube from the midpipe. Mine was blocked with excess metal/material (from the inside of the midpipe) and I had to remove it. So far, no probs and no ECU comin on again.
09-26-2002, 08:50 AM
#13
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 2,084
Originally posted by Shoooter_j
Guys I had the same code dealing with the EVAP Solenoid and Purge valve (0807). Check if there is anything blocking the smallest hose/tube from the midpipe. Mine was blocked with excess metal/material (from the inside of the midpipe) and I had to remove it. So far, no probs and no ECU comin on again.
Guys I had the same code dealing with the EVAP Solenoid and Purge valve (0807). Check if there is anything blocking the smallest hose/tube from the midpipe. Mine was blocked with excess metal/material (from the inside of the midpipe) and I had to remove it. So far, no probs and no ECU comin on again.
09-26-2002, 10:15 AM
#14
Originally posted by JAIMECBR900
I have no clue where the solenoid is to start tracing. I know where the canister is, but not the solenoid. What hoses are you referring to?
I have no clue where the solenoid is to start tracing. I know where the canister is, but not the solenoid. What hoses are you referring to?
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM