General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Newer Pathfinder nissan emblem size

Old 10-25-2002 | 12:01 PM
  #1  
releasedtruth's Avatar
Thread Starter
rilla dope
 
Joined: Jun 2002
Posts: 1,152
Newer Pathfinder nissan emblem size

Does anyone have a newer Pathfinder on the board? I'm looking to find out how big the small nissan emblem next to the rear wiper is. The one that's above the centered Pathfinder emblem. I might have use for it on the Max and the dealer doesn't have the dimensions.... Thanks
Old 10-25-2002 | 12:18 PM
  #2  
Keven97SE
Guest
 
Posts: n/a
Re: Newer Pathfinder nissan emblem size

Suggestion: "Stalk" a new Pathfinder in a mall parking lot. Take your own ruler and pull the dimensions yourself. I doubt anyone on this board is going to have that info.

Originally posted by releasedtruth
Does anyone have a newer Pathfinder on the board? I'm looking to find out how big the small nissan emblem next to the rear wiper is. The one that's above the centered Pathfinder emblem. I might have use for it on the Max and the dealer doesn't have the dimensions.... Thanks
Old 10-25-2002 | 12:20 PM
  #3  
releasedtruth's Avatar
Thread Starter
rilla dope
 
Joined: Jun 2002
Posts: 1,152
Re: Re: Newer Pathfinder nissan emblem size

Originally posted by Keven97SE
Suggestion: "Stalk" a new Pathfinder in a mall parking lot. Take your own ruler and pull the dimensions yourself. I doubt anyone on this board is going to have that info.

I've already considered that actually. I just haven't seen one and I know guys on this board have them as well, just a shout out to them is all.
Old 10-25-2002 | 12:44 PM
  #4  
Y2KevSE's Avatar
Rice Boy in Denial =)
iTrader: (13)
 
Joined: Aug 2000
Posts: 25,356
Re: Re: Re: Newer Pathfinder nissan emblem size

Originally posted by releasedtruth


I've already considered that actually. I just haven't seen one and I know guys on this board have them as well, just a shout out to them is all.
Ask irvine78 for a photo of his Pathfinder-derived "TPR" (Toilet Paper Racing) lettering.
Old 10-26-2002 | 02:59 PM
  #5  
BJGemini's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 362
Re: Re: Newer Pathfinder nissan emblem size

Originally posted by Keven97SE
Suggestion: "Stalk" a new Pathfinder in a mall parking lot. Take your own ruler and pull the dimensions yourself. I doubt anyone on this board is going to have that info.

And have some dental floss ready if you like the size.

B
Old 10-26-2002 | 03:01 PM
  #6  
Sin's Avatar
Sin
Senior Member
 
Joined: Jan 2002
Posts: 2,007
Re: Re: Re: Newer Pathfinder nissan emblem size

Originally posted by BJGemini


And have some dental floss ready if you like the size.

B
And someone to watch your back
Old 10-26-2002 | 03:03 PM
  #7  
pezking4's Avatar
Senior Member
 
Joined: May 2002
Posts: 2,208
I can measure mine tomorrow
Old 10-26-2002 | 03:10 PM
  #8  
BJGemini's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 362
Originally posted by pezking4
I can measure mine tomorrow
Just need to find a ruler?
Old 10-26-2002 | 03:15 PM
  #9  
pezking4's Avatar
Senior Member
 
Joined: May 2002
Posts: 2,208
I'm in Raleigh right now, with my max. The Pathfinder is in Lumberton (100 miles south of Raleigh), but tomorrow I am driving there.
Old 10-26-2002 | 03:39 PM
  #10  
MAAXDOUT's Avatar
Member
 
Joined: Oct 2001
Posts: 50
Why not just go to the dealer parking lot and get it from there lol
Old 10-26-2002 | 08:39 PM
  #11  
Brendan's Avatar
Senior Member
 
Joined: May 2002
Posts: 933
Originally posted by MAAXDOUT
Why not just go to the dealer parking lot and get it from there lol
haha seriously it took about 10 posts for someone to think about this
Old 10-26-2002 | 08:47 PM
  #12  
Vinipux's Avatar
Senior Member
 
Joined: Mar 2001
Posts: 1,111
Originally posted by Brendan


haha seriously it took about 10 posts for someone to think about this
I agree, but I think the you need at least a BS degree to figure this out, unfortunatly most of the people don't have one here, so figure it out
Old 10-26-2002 | 08:48 PM
  #13  
gtr_rider's Avatar
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,637
From: Ft. Lauderdale, FL
Originally posted by Brendan


haha seriously it took about 10 posts for someone to think about this
is that your max!?!?!


















Old 10-26-2002 | 11:29 PM
  #14  
Brendan's Avatar
Senior Member
 
Joined: May 2002
Posts: 933
Originally posted by gtr_rider


is that your max!?!?!


















No, I wish it was, its photoshopped.
Old 10-27-2002 | 01:57 AM
  #15  
95emeraldgxe's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 8,659
Re: Re: Newer Pathfinder nissan emblem size

Originally posted by Keven97SE
Suggestion: "Stalk" a new Pathfinder in a mall parking lot. Take your own ruler and pull the dimensions yourself. I doubt anyone on this board is going to have that info.

why use a ruler when you can use some fishing line and a hairdryer
Old 10-27-2002 | 12:57 PM
  #16  
pezking4's Avatar
Senior Member
 
Joined: May 2002
Posts: 2,208
The SE emblem is 3 1/8" in length and 1 1/8" inch tall
The Nissan emblem is 1 1/8" by 2 1/2"
Old 10-27-2002 | 01:14 PM
  #17  
releasedtruth's Avatar
Thread Starter
rilla dope
 
Joined: Jun 2002
Posts: 1,152
Sweet, that's exactly the number I was lookin for. Might be a little large, but I'll see what I can do
Old 10-27-2002 | 06:42 PM
  #18  
raga55's Avatar
Supporting Maxima.org Member
 
Joined: Jul 2002
Posts: 286
Originally posted by releasedtruth
Sweet, that's exactly the number I was lookin for. Might be a little large, but I'll see what I can do
what exactly is it u r trying to do? j/w
Old 10-28-2002 | 06:28 AM
  #19  
lcf's Avatar
lcf
Senior Member
iTrader: (6)
 
Joined: Mar 2002
Posts: 2,583
I believe TimW, one of our moderators, has a Pathfinder. Not sure on which generation he has though. Good luck!
Old 10-28-2002 | 06:49 AM
  #20  
releasedtruth's Avatar
Thread Starter
rilla dope
 
Joined: Jun 2002
Posts: 1,152
Okay, here's the plan. I was going to succeed before I posted the idea so I wouldn't get that evil failure feeling too early. Anyway, I have a 2k1 as you know and on the steering wheel there's an embossed logo. I wanted to superimpose a nissan logo over top ala the 02/03 Nissans. The problem is it's 2" and every logo I've found is too big. The 1st gen Altimas are the closest, but the dealer wants 35 bucks for one! and that's too much just to test out. I thought the Pathfinder one might be about right, but I'm gonna try the altima when I get a chance. I've posted about it before, just haven't given up yet.
Old 10-28-2002 | 11:38 AM
  #21  
pezking4's Avatar
Senior Member
 
Joined: May 2002
Posts: 2,208
And your measurements came from this by the way...

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
adamgalazka
8th Generation Maxima (2016-)
10
02-05-2023 08:24 AM
minsbang
8th Generation Maxima (2016-)
1
09-11-2015 08:48 PM
coasterswim
8th Generation Maxima (2016-)
0
09-02-2015 07:43 AM


Thread Tools
Search this Thread
Quick Reply: Newer Pathfinder nissan emblem size



All times are GMT -7. The time now is 04:19 PM.