1 piece Cefiro headlights installed on my Max
#83
The HID housing off the wagon is TIGHT!! Hey, did anyone ever notice that on sycefiro's page on the last page, he has a black and white pic. Notice where the exhaust is, its on the driver side? Can you enlighten me.
#84
Turtle turtle... Moderator
Thread Starter
iTrader: (25)
Join Date: Aug 2000
Location: San Bruno, Petaluma, SF Bay area
Posts: 4,857
hey guys
Aloha from Hawaii, im at a internet cafe so i dont have time to read through posts and stuff. sorry if i havent replied to peoples emails as well...ill be online again once i get back...17th. Lata
Aloha from Hawaii, im at a internet cafe so i dont have time to read through posts and stuff. sorry if i havent replied to peoples emails as well...ill be online again once i get back...17th. Lata
#85
Originally posted by Turbo95Max
hey guys
Aloha from Hawaii, im at a internet cafe so i dont have time to read through posts and stuff. sorry if i havent replied to peoples emails as well...ill be online again once i get back...17th. Lata
hey guys
Aloha from Hawaii, im at a internet cafe so i dont have time to read through posts and stuff. sorry if i havent replied to peoples emails as well...ill be online again once i get back...17th. Lata
#86
Moderator running more PSI than all the boosted Maximas... combined
iTrader: (5)
Join Date: Aug 2000
Posts: 6,345
Albert,
Where did you pick up fiberglass laminated sheets? Are they easy to work with? ie. Will they bend if you use a heat gun on them?
Where did you pick up fiberglass laminated sheets? Are they easy to work with? ie. Will they bend if you use a heat gun on them?
Originally posted by Albertt
As for the grille, I have some fiberglass laminate sheets lying around, maybe I can figure that out later.
AL
As for the grille, I have some fiberglass laminate sheets lying around, maybe I can figure that out later.
AL
#87
Originally posted by JsL
The HID housing off the wagon is TIGHT!! Hey, did anyone ever notice that on sycefiro's page on the last page, he has a black and white pic. Notice where the exhaust is, its on the driver side? Can you enlighten me.
The HID housing off the wagon is TIGHT!! Hey, did anyone ever notice that on sycefiro's page on the last page, he has a black and white pic. Notice where the exhaust is, its on the driver side? Can you enlighten me.
"image flip horizontal"
#89
Originally posted by 1MAX2NV
Albert,
Where did you pick up fiberglass laminated sheets? Are they easy to work with? ie. Will they bend if you use a heat gun on them?
Albert,
Where did you pick up fiberglass laminated sheets? Are they easy to work with? ie. Will they bend if you use a heat gun on them?
Easy to work with, well it depends. You can epoxy the parts together, but heat is definitely not good for the epoxyy that is used to manufacture the sheets. The stuff is a laminate...fiberglass cloth impregnated and pressed into sheets. They might not bend with high temp, but might actually start to burn.
What do you need it for? I know of places where you could obtain it in large quantities. They also have carbon fiber laminate if you desire that.
#92
they look good and I thought about them before I started my 2k2 audi S4 project... but I really wanted projection so I gave up on them.
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
#93
Moderator running more PSI than all the boosted Maximas... combined
iTrader: (5)
Join Date: Aug 2000
Posts: 6,345
Thanks for the info. I thought they might save me some work for my audio install. If they would bend when after heated, I could contour them to odd shapes inside my trunk.
Originally posted by Albertt
Sorry boss, I obtained them from work. We had a few scraps left from an erosion coating test and I scrounged some pieces originally intended for me to make some chassis parts for my RC car.
Easy to work with, well it depends. You can epoxy the parts together, but heat is definitely not good for the epoxyy that is used to manufacture the sheets. The stuff is a laminate...fiberglass cloth impregnated and pressed into sheets. They might not bend with high temp, but might actually start to burn.
What do you need it for? I know of places where you could obtain it in large quantities. They also have carbon fiber laminate if you desire that.
Sorry boss, I obtained them from work. We had a few scraps left from an erosion coating test and I scrounged some pieces originally intended for me to make some chassis parts for my RC car.
Easy to work with, well it depends. You can epoxy the parts together, but heat is definitely not good for the epoxyy that is used to manufacture the sheets. The stuff is a laminate...fiberglass cloth impregnated and pressed into sheets. They might not bend with high temp, but might actually start to burn.
What do you need it for? I know of places where you could obtain it in large quantities. They also have carbon fiber laminate if you desire that.
#94
Originally posted by theblue
they look good and I thought about them before I started my 2k2 audi S4 project... but I really wanted projection so I gave up on them.
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
they look good and I thought about them before I started my 2k2 audi S4 project... but I really wanted projection so I gave up on them.
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
#95
Originally posted by Turbo95Max
haahha
yes and no, im willing to help people out and stuff. BUT, i dont think its right when people ask for writeups and demand all these answers basically lookin for the easy way. i work and think hard to do some innovative things. Thats what makes me feel that my Max is unique from others.
haahha
yes and no, im willing to help people out and stuff. BUT, i dont think its right when people ask for writeups and demand all these answers basically lookin for the easy way. i work and think hard to do some innovative things. Thats what makes me feel that my Max is unique from others.
#98
Re: 1 piece Cefiro headlights installed on my Max
Updates for Matthal's car with photos above.
Reviews:
1. No outter fender modification to fit.
2. Need to make special bracket to fit the stock grilles
3. Need to trim some metal parts inside the fender/besides the headlight mounting brackets
4. Need to remove the weather strip.
5. Looks like a better fit than BMW 3-seris headlights on the 3rd gen.. probably because this products made for the same family
Results:
1. Cefiro One piece headlights fitting on the 4th Gen Maxima
2. H-4 output (better beam pattern)
3. Built-in City Lights
4. Pretty nice fit with some minor mods
SY
sycefiro@yahoo.com
TEST RESULT: PASSED! CONGRADULATION!!
Now let the conversion get started....
#103
Originally posted by slimer
is that intercooler piping that i see?
is that intercooler piping that i see?
Originally posted by MAXIN
Any pics of the city lights? Can the bulb be changed to a different color?
Any pics of the city lights? Can the bulb be changed to a different color?
#107
You're up late as well I see...I may have a chance to get the one - piece lights...what is a fair price for these to be shipped to me...?
I saw like $200-$240,...is that about right?
I saw like $200-$240,...is that about right?
#108
Originally posted by WizzaMax
You're up late as well I see...I may have a chance to get the one - piece lights...what is a fair price for these to be shipped to me...?
I saw like $200-$240,...is that about right?
You're up late as well I see...I may have a chance to get the one - piece lights...what is a fair price for these to be shipped to me...?
I saw like $200-$240,...is that about right?
#112
Originally posted by MAXIN
Any pics of the city lights? Can the bulb be changed to a different color?
Any pics of the city lights? Can the bulb be changed to a different color?
#115
Originally posted by theblue
they look good and I thought about them before I started my 2k2 audi S4 project... but I really wanted projection so I gave up on them.
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
they look good and I thought about them before I started my 2k2 audi S4 project... but I really wanted projection so I gave up on them.
here is a pic of my lights at their current stage... I should be done by spring with the grill etc...
EDIT: don't email about how to do this unless you are ready to drop $2000 on the project...
No pix yet but coming to an UncleMax near you.
#117
Guest
Posts: n/a
CEFIRO MODS
Finally I got a good accessories for my car ALL cefiro parts directly from far east I brought a couple with me.. any one interested
1- Cefiro Headlights 200 USD set (2 pieces l + r)
2- Cefiro Chrome Fenders 100USD set (4 pieces)
3- Cefiro Inner Chrome Handles 80 USD set (4 pieces)
contact me at info@zabraka.com
http://www.zabraka.com/site2
1- Cefiro Headlights 200 USD set (2 pieces l + r)
2- Cefiro Chrome Fenders 100USD set (4 pieces)
3- Cefiro Inner Chrome Handles 80 USD set (4 pieces)
contact me at info@zabraka.com
http://www.zabraka.com/site2
#119
Turtle turtle... Moderator
Thread Starter
iTrader: (25)
Join Date: Aug 2000
Location: San Bruno, Petaluma, SF Bay area
Posts: 4,857
wow 200 a set is good. i assume they are aftermarket rite? my left side is aftermarket and right side is Nissan OEM. ive noticed the Nissan OEM has a nice beam pattern while the aftermarket is all over the place. i think i want to get a right side Nissan OEM.