Y-Pipe for Christmas - Help me choose!!!!
12-13-2002, 09:54 PM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Y-Pipe for Christmas - Help me choose!!!!
I'm going to break down and finally do it. I thought about getting the Budget but I don't know them to well. Although I'm not cool with Warpspeeds marketing scheme, I think they make a good pipe and I may go with them (Warpspeed, feel free to chime in).
Cattman and Stealin' are too expensive. I don't know who to go with. Help me peeps!
Cattman and Stealin' are too expensive. I don't know who to go with. Help me peeps!
12-13-2002, 10:31 PM
#2
Re: Y-Pipe for Christmas - Help me choose!!!!
Originally posted by deezo
I'm going to break down and finally do it. I thought about getting the Budget but I don't know them to well. Although I'm not cool with Warpspeeds marketing scheme, I think they make a good pipe and I may go with them (Warpspeed, feel free to chime in).
Cattman and Stealin' is too expensive. I don't know who to go with. Help me peeps!
I'm going to break down and finally do it. I thought about getting the Budget but I don't know them to well. Although I'm not cool with Warpspeeds marketing scheme, I think they make a good pipe and I may go with them (Warpspeed, feel free to chime in).
Cattman and Stealin' is too expensive. I don't know who to go with. Help me peeps!
12-14-2002, 12:46 AM
#3
I have a cattman but if I were to buy it all over again, I would have got a warpspeed. Cattman is a good pipe especially the new flex versions but for the money, Warpspeed gets the job done just as well with less $$.
12-14-2002, 09:55 AM
#7
If you have the money..............the new Cattman............
If not....Budget.......mine has performed flawlessly for a year or so.
Even better with the Apexi WS.
Warpspeed sucks.......Tried to order from them........no returned emails or calls
Of course thats just my opinion
If not....Budget.......mine has performed flawlessly for a year or so.
Even better with the Apexi WS.
Warpspeed sucks.......Tried to order from them........no returned emails or calls
Of course thats just my opinion
12-14-2002, 10:19 AM
#11
Not DAVEB the parts guy
Join Date: Aug 2000
Posts: 8,555
WSP non-mandrel alumized Y-pipe. If you order that one, you'll get it very quickly plus it's cheap (~$195). Mine made more power on the dyno vs the Stillen pipe and don't bother with the mandrel pipe because it doesn't make anymore power (I witnessed it on the dyno). I've had mine on my car for 1.5 years and it still looks new, even after going thru a salty midwest winter.
Dave
Dave
12-14-2002, 12:36 PM
#12
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally posted by Dave B
WSP non-mandrel alumized Y-pipe. If you order that one, you'll get it very quickly plus it's cheap (~$195). Mine made more power on the dyno vs the Stillen pipe and don't bother with the mandrel pipe because it doesn't make anymore power (I witnessed it on the dyno). I've had mine on my car for 1.5 years and it still looks new, even after going thru a salty midwest winter.
Dave
WSP non-mandrel alumized Y-pipe. If you order that one, you'll get it very quickly plus it's cheap (~$195). Mine made more power on the dyno vs the Stillen pipe and don't bother with the mandrel pipe because it doesn't make anymore power (I witnessed it on the dyno). I've had mine on my car for 1.5 years and it still looks new, even after going thru a salty midwest winter.
Dave
12-14-2002, 02:01 PM
#14
How can you beat 158.xx shipped for a pipe. If you get stillen, I think you are just paying for the name. Budget is the way to go. My experience
12-14-2002, 07:26 PM
#16
I'm happy with my WSP SS Y, its a very well made product. However, their customer service is complete **** 
I think they write down orders on a post-it note, and hope that dallas sees it on his fridge or something. To make a long story short, they screwed up my order, and I had to send unordered parts (which i was charged for) back to them, 3 months later still no refund I I had to do it all over again, I would have gotten the Budget.
Get the budget...
I think they write down orders on a post-it note, and hope that dallas sees it on his fridge or something. To make a long story short, they screwed up my order, and I had to send unordered parts (which i was charged for) back to them, 3 months later still no refund I I had to do it all over again, I would have gotten the Budget.Get the budget...
12-16-2002, 07:23 AM
#20
Re: Blubyu.....Install?
Originally posted by Eenis
Hey Blu...where are you gonna get your y installed?
Hey Blu...where are you gonna get your y installed?
12-16-2002, 07:35 AM
#21
Originally posted by deezo
I'm looking at the Budget site and I don't see the 150 dollar pipe.
I'm looking at the Budget site and I don't see the 150 dollar pipe.
$250 Canadian = $162 US
Thanks.
12-16-2002, 08:22 AM
#24
Donating Maxima.org Member
Join Date: Jun 2002
Posts: 450
Originally posted by deezo
I'm looking at the Budget site and I don't see the 150 dollar pipe.
I'm looking at the Budget site and I don't see the 150 dollar pipe.
IT's the top of the Imported Vehicles list. The price is in Canadian $.
Mine was $159.26 US, shipped.
Still waiting to install it though...
12-16-2002, 10:18 PM
#26
Senior Member
Join Date: Apr 2002
Posts: 554
would you consider the obx header? It's new and straight off the engine and includes the y-pipe. It has the potential to yield more power than the y-pipe, but nobody has it yet. I think it's got potential. You'd be one of the first on the forum to have one.
12-16-2002, 11:06 PM
#27
Senior Member
Join Date: Mar 2002
Posts: 176
Originally posted by SamMan23
would you consider the obx header? It's new and straight off the engine and includes the y-pipe. It has the potential to yield more power than the y-pipe, but nobody has it yet. I think it's got potential. You'd be one of the first on the forum to have one.
would you consider the obx header? It's new and straight off the engine and includes the y-pipe. It has the potential to yield more power than the y-pipe, but nobody has it yet. I think it's got potential. You'd be one of the first on the forum to have one.
12-17-2002, 01:00 AM
#28
Senior Member
Join Date: Mar 2002
Posts: 1,166
Re: Y-Pipe for Christmas - Help me choose!!!!
Originally posted by deezo
I'm going to break down and finally do it. I thought about getting the Budget but I don't know them to well. Although I'm not cool with Warpspeeds marketing scheme, I think they make a good pipe and I may go with them (Warpspeed, feel free to chime in).
Cattman and Stealin' are too expensive. I don't know who to go with. Help me peeps!
I'm going to break down and finally do it. I thought about getting the Budget but I don't know them to well. Although I'm not cool with Warpspeeds marketing scheme, I think they make a good pipe and I may go with them (Warpspeed, feel free to chime in).
Cattman and Stealin' are too expensive. I don't know who to go with. Help me peeps!
12-17-2002, 05:41 AM
#29
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally posted by SamMan23
would you consider the obx header? It's new and straight off the engine and includes the y-pipe. It has the potential to yield more power than the y-pipe, but nobody has it yet. I think it's got potential. You'd be one of the first on the forum to have one.
would you consider the obx header? It's new and straight off the engine and includes the y-pipe. It has the potential to yield more power than the y-pipe, but nobody has it yet. I think it's got potential. You'd be one of the first on the forum to have one.
12-17-2002, 08:50 AM
#34
Senior Member
Join Date: Oct 2001
Posts: 812
If you are considering the Cattman
here is a link to a GD
http://forums.maxima.org/showthread....hreadid=172694
Good luck with whatever you choose, I too am getting a Y for Christmas.
http://forums.maxima.org/showthread....hreadid=172694
Good luck with whatever you choose, I too am getting a Y for Christmas.
Thread
Thread Starter
Forum
Replies
Last Post
lrb6805
4th Generation Maxima (1995-1999)
7
09-17-2015 04:49 PM
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM