Is one hot car!
Quote:
Originally posted by nadir_s
I think Greg is going to post my pictures here but haven't seen it up yet so lemme just give you guys the links to it and... up to u guys! I left out the mesh on the kit.... obviously u can put it in there, dependin on ure preference. I kinda did a before/after thingy... check it out
http://www.nadir.SoHoUnion.com/bodykit/front_kit.htm
http://www.nadir.SoHoUnion.com/bodykit/side_kit.htm
Originally posted by nadir_s
I think Greg is going to post my pictures here but haven't seen it up yet so lemme just give you guys the links to it and... up to u guys! I left out the mesh on the kit.... obviously u can put it in there, dependin on ure preference. I kinda did a before/after thingy... check it out
http://www.nadir.SoHoUnion.com/bodykit/front_kit.htm
http://www.nadir.SoHoUnion.com/bodykit/side_kit.htm
sorry i had to.. that's really really bad.. lol..
Quote:
Originally posted by thebigsadler
sorry i had to.. that's really really bad.. lol..
Originally posted by thebigsadler
sorry i had to.. that's really really bad.. lol..
hater
Quote:
Originally posted by nadir_s
hater
actually.. you coulda took more time on it cheif.. sorryOriginally posted by nadir_s
hater
I get the jist of it though, which is the point
Quote:
Originally posted by gtr_rider
actually.. you coulda took more time on it cheif.. sorry
I get the jist of it though, which is the point
eh whatever, i tried. if it sucks, it sucks.Originally posted by gtr_rider
actually.. you coulda took more time on it cheif.. sorry
I get the jist of it though, which is the point
Quote:
Originally posted by max'n out
I got the design I want but can't photoshop
And it's probalby one you would pick, that is if you have taste.
sketch it on paper and scan it for us!Originally posted by max'n out
I got the design I want but can't photoshop
And it's probalby one you would pick, that is if you have taste.
Senior Member
.http://vqpower.com/cm/5g2f1.jpg
Done by: Gtr_Rider
That 5th gen kit looks so tight! That better be the kit selected, It fits the car perfectly
Done by: Gtr_Rider
That 5th gen kit looks so tight! That better be the kit selected, It fits the car perfectly
Quote:
Originally posted by gtr_rider
Seeing as this server stinks and its not allowing me to do this correctly, I will just link it..
http://vqpower.com/cm/bodykits.htm
You are obviously very good at photoshoping kits gtr.. However, out of all of those, I only liked this one:Originally posted by gtr_rider
Seeing as this server stinks and its not allowing me to do this correctly, I will just link it..
http://vqpower.com/cm/bodykits.htm
http://vqpower.com/cm/4g4f1.jpg
which other than having no turn signals, looks very much like what I was trying to get at with the Aston lower grill and fogs. I also like the one for the 5th gen at the bottom. The rest of them I really didn't care for. My $0.02
Quote:
Originally posted by BBaker025
.http://vqpower.com/cm/5g2f1.jpg
Done by: Gtr_Rider
That 5th gen kit looks so tight! That better be the kit selected, It fits the car perfectly
I am in love, you just tied up with the kit on the left in MaximaZero's sig. Where is MaximaZero anyway he should be putting in some input.Originally posted by BBaker025
.http://vqpower.com/cm/5g2f1.jpg
Done by: Gtr_Rider
That 5th gen kit looks so tight! That better be the kit selected, It fits the car perfectly
I took ure advice gtr and spent a bit more time.... not much tho haha. I like ure 5th gen kit, subtle and not too flashy.
Senior Member
Quote:
Originally posted by JoesMAX
and thats my design Greg, so if it wins it goes to me
Originally posted by JoesMAX
and thats my design Greg, so if it wins it goes to me
Too bad you have a 5th gen Joe
Quote:
Originally posted by nadir_s
I took ure advice gtr and spent a bit more time.... not much tho haha. I like ure 5th gen kit, subtle and not too flashy.
What are those green boxes?Originally posted by nadir_s
I took ure advice gtr and spent a bit more time.... not much tho haha. I like ure 5th gen kit, subtle and not too flashy.
Quote:
Originally posted by gtr_rider
What are those green boxes?
green? what are you talkin about?Originally posted by gtr_rider
What are those green boxes?
Quote:
Originally posted by nadir_s
green? what are you talkin about?
brighten your monitor, and you will notice 4 green boxes on the sides of the inletOriginally posted by nadir_s
green? what are you talkin about?
Quote:
Originally posted by gtr_rider
brighten your monitor, and you will notice 4 green boxes on the sides of the inlet
oh lol, those are suppose to be part of the kit! fit fogs in there or something... ill play with it tomorrow and add fogs. I fixed it up a bit. I don't know why they look green... i keep my monitor brightness high yet it's more of a dark blue color than green. blah this is quite a learning experience. thanks for pointing out those outOriginally posted by gtr_rider
brighten your monitor, and you will notice 4 green boxes on the sides of the inlet
Senior Member
Luke I really like this one you made...
http://vqpower.com/cm/5g1f1.jpg
Can you make some nice side skirts and a rear valance that would match it?
http://vqpower.com/cm/5g1f1.jpg
Can you make some nice side skirts and a rear valance that would match it?
Quote:
Originally posted by nadir_s
I took ure advice gtr and spent a bit more time.... not much tho haha. I like ure 5th gen kit, subtle and not too flashy.
Originally posted by nadir_s
I took ure advice gtr and spent a bit more time.... not much tho haha. I like ure 5th gen kit, subtle and not too flashy.
keep these comin, hours of entertainment...
hm... i'm not sure if i'll have time to try to come up with anything new, but i'll post what i already have done. if i can get my programming project done early enough, i'll try to finish some other ideas i've had.
Senior Member
Quote:
Originally posted by nadir_s
sketch it on paper and scan it for us!
I can't draw either, best I could really do is try and explain it. Originally posted by nadir_s
sketch it on paper and scan it for us!
Plus i have no scanner.
I absolutely love this. 
Quote:
Originally posted by Greg's2kGLE
Luke I really like this one you made...
http://vqpower.com/cm/5g1f1.jpg
Can you make some nice side skirts and a rear valance that would match it?
two more 5th gen kits & 4thOriginally posted by Greg's2kGLE
Luke I really like this one you made...
http://vqpower.com/cm/5g1f1.jpg
Can you make some nice side skirts and a rear valance that would match it?
Senior Member
Do they make a spoiler like this? If they do, what car is off of? I have a GLE maxima and wanted to buy an OEM spoiler but now I want this one.
Quote:
Originally posted by 99MAXSE-L
jus foolin around...
That must be a mighty small metal bumper behind thereOriginally posted by 99MAXSE-L
jus foolin around...
Senior Member
Quote:
Originally posted by gtr_rider
That must be a mighty small metal bumper behind there
not my problem, im the designer! Originally posted by gtr_rider
That must be a mighty small metal bumper behind there
Senior Member
Quote:
Originally posted by thebigsadler
i'm wondering if this guarranty holds strong like unveiling the "custom maxima project car" or the one-piece headlights.. not trying to be a d*ck, just stating facts.
Originally posted by thebigsadler
i'm wondering if this guarranty holds strong like unveiling the "custom maxima project car" or the one-piece headlights.. not trying to be a d*ck, just stating facts.
HAHA....funny you say that....i was say that but u beat me to it.
Quote:
Originally posted by hockeyghst
HAHA....funny you say that....i was say that but u beat me to it.
Many have said it already, *outside this thread of course* Originally posted by hockeyghst
HAHA....funny you say that....i was say that but u beat me to it.
Quote:
Originally posted by hakk97se
You are obviously very good at photoshoping kits gtr.. However, out of all of those, I only liked this one:
http://vqpower.com/cm/4g4f1.jpg
which other than having no turn signals, looks very much like what I was trying to get at with the Aston lower grill and fogs. I also like the one for the 5th gen at the bottom. The rest of them I really didn't care for. My $0.02
i would have to concur with that. Originally posted by hakk97se
You are obviously very good at photoshoping kits gtr.. However, out of all of those, I only liked this one:
http://vqpower.com/cm/4g4f1.jpg
which other than having no turn signals, looks very much like what I was trying to get at with the Aston lower grill and fogs. I also like the one for the 5th gen at the bottom. The rest of them I really didn't care for. My $0.02
and I would def. get this kit, that is if I keep my mxima. :/
