11.912et @ 117.39mph - 1.829-60'
Awesome run Matt, great job.
![[maxi-overdose]'s Avatar](https://maxima.org/forums/customavatars/avatar1856_1.gif){kind=avatar}
<- Matt
03-03-2005, 08:16 PM
#170
Damn I was completely unaware of Mardisgras breaking into the 11's. What was his mod list at the time, I know he was working with the Stillen/Vortech SC, but I can't imagine he made those runs without going to another system.
03-04-2005, 06:15 AM
#171
Originally Posted by BrianV
Damn I was completely unaware of Mardisgras breaking into the 11's. What was his mod list at the time, I know he was working with the Stillen/Vortech SC, but I can't imagine he made those runs without going to another system.
03-04-2005, 08:13 AM
#177
Of course he will....
N20+turbo >>>>> N20+SC
Let alone now that he's probably installed his new VQ35 block.
I think he'll be low 11s easy, but could he break 10s with 20+psi?
N20+turbo >>>>> N20+SC
Let alone now that he's probably installed his new VQ35 block.
I think he'll be low 11s easy, but could he break 10s with 20+psi?
Originally Posted by blubyu2k2
no I guess I should have clarified I believe mardigras will beat his own record this weekend.
03-04-2005, 08:24 AM
#178
Originally Posted by IceY2K1
Of course he will....
N20+turbo >>>>> N20+SC
Let alone now that he's probably installed his new VQ35 block.
I think he'll be low 11s easy, but could he break 10s with 20+psi?
N20+turbo >>>>> N20+SC
Let alone now that he's probably installed his new VQ35 block.
I think he'll be low 11s easy, but could he break 10s with 20+psi?
03-04-2005, 08:27 AM
#179
Originally Posted by blubyu2k2
Im not sure if he got the 3.5 shortblock in yet or not, h3ll he'll probably be low 11's all boost with the 3.5 shortblock, that is if the slicks will hold the torque the beast will be putting down. I think he could have ran a 11.6 with his SC setup if he launched it as hard as he does now.
03-04-2005, 08:44 AM
#181
Originally Posted by Cutler
He launched at 5k on the 11.91 run......, do you want him to rev it till fuel cut?
but he has been launching at 6k the past few trips to the track pulling low 1.7's vs mid 1.8's...
03-04-2005, 11:20 AM
#182
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Have seen Mardi post in a while, any thread links about him going to the track this weekend? Last I remeber he had a bad dyno and was trying to find his power loss.
Can't wait to see the results from this comming weekend!
Can't wait to see the results from this comming weekend!
03-04-2005, 11:38 AM
#183
He told me "opening day at MIR track is March 6th", but that didn't mean he's going this Sunday.
He redid his reverse ypipe(was selling old) and fixed his wastegate flutter issue by putting a better/stiffer spring and playing with the EBC.
According to Matts' email,
> > The New Y/Feed pipe is on I spool and get to a
> > particullar boost level ~250
> > rpm sooner than the last data log from when I put
> > the 1bar WG spring in
> > 1psi @ 2630rpm
> > 5psi @ 3880rpm
> > 10psi @ 4280rpm
> > 13.6 @ 4470rpm
> > 16.1 @ 4680rpm
> > So Ive got full boost (16psi) around torque peak
> > which should help allot, it
> > feels good!
He redid his reverse ypipe(was selling old) and fixed his wastegate flutter issue by putting a better/stiffer spring and playing with the EBC.
According to Matts' email,
> > The New Y/Feed pipe is on I spool and get to a
> > particullar boost level ~250
> > rpm sooner than the last data log from when I put
> > the 1bar WG spring in
> > 1psi @ 2630rpm
> > 5psi @ 3880rpm
> > 10psi @ 4280rpm
> > 13.6 @ 4470rpm
> > 16.1 @ 4680rpm
> > So Ive got full boost (16psi) around torque peak
> > which should help allot, it
> > feels good!
03-04-2005, 04:01 PM
#186
Their calling for snow this Saturday, and sunday mig be a waste, but I will try.
Still on the stock 3.0L as blu said, emissions testing etc.
I have Alk/WI hooked up now. Ant the juice is plumbed but has not been tested.
Im hoping for 11.5 or better.
Still on the stock 3.0L as blu said, emissions testing etc.
I have Alk/WI hooked up now. Ant the juice is plumbed but has not been tested.
Im hoping for 11.5 or better.
03-04-2005, 04:09 PM
#187
Originally Posted by I30tMikeD
Have seen Mardi post in a while, any thread links about him going to the track this weekend? Last I remeber he had a bad dyno and was trying to find his power loss.
Can't wait to see the results from this comming weekend!
Can't wait to see the results from this comming weekend!
he's just been low-key
matt, hope the weather holds up for you guys. you know you have to go for broke in the first pass cause that might be all you get at MIR
03-05-2005, 09:35 AM
#191