I need someone with a Maxima website to host my battery trunk install
02-02-2001, 07:34 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2001
Posts: 1,277
I wrote up the procedure (in Word 97) for moving the battery to the trunk on a 4th gen. and have some jpgs to go with it. I was wondering if one of you guys that has a Maxima website would be interested in posting it? I'll be happy to give it to any and all who want it.
02-04-2001, 07:13 PM
#4
Senior Member
Join Date: Nov 2000
Posts: 588
i would like to post it too
its not really a maxima web site, mostly about the oklahoma street racing scene but since i do have a maxima i would be happy to post on my site so that anyone interested can look.
my e-mail addy is n0d0ubt@swbell.net
my e-mail addy is n0d0ubt@swbell.net
02-05-2001, 04:37 PM
#7
Senior Member
Thread Starter
Join Date: Jan 2001
Posts: 1,277
The reason I moved the battery to the trunk is for better weight distribution on the autocross track.
My Maxima pushes (understeers) really bad, as do most front wheel drive cars. IIRC, the factory weight dist. is 63% front and 37% rear. Redistributing some of the front end weight to the rear reduces push and gives the car better balance through the turns.
My Maxima pushes (understeers) really bad, as do most front wheel drive cars. IIRC, the factory weight dist. is 63% front and 37% rear. Redistributing some of the front end weight to the rear reduces push and gives the car better balance through the turns.
02-06-2001, 11:44 AM
#9
Finally, A New Status Title...How About Donating Maxima.org Member...Oh wait...NO!!!
iTrader: (1)
Join Date: Nov 2000
Posts: 968
that was what i was thinking...
i thought it would be handy for someone thinking about a custom intake or CAI setup.. i didn't even think about the weight distribution aspect..every little bit helps for that understeer!
it'll be up in a week or so under my site.
Jules
it'll be up in a week or so under my site.
Jules
02-06-2001, 06:52 PM
#10
Senior Member
Join Date: Dec 2000
Posts: 901
Originally posted by theblue
cool! I'm just thinking about some ram air CAI thing that would be possible with that entire corner free
cool! I'm just thinking about some ram air CAI thing that would be possible with that entire corner free
I've been thinking about this for a while, besides the weight distribution advantage, this corner being open presents lots of apportunities for a CAI mod; I'm thinking with a piece of chrome plated pipe and some sort of pass thru to the front of the car in the grill area.
02-06-2001, 07:16 PM
#12
Senior Member
Thread Starter
Join Date: Jan 2001
Posts: 1,277
So far, these 3 web sites have my files up. Thanks to all of you webmasters for being so quick. One guy had 103 fever and was considering going to the emergency room, but he still managed to post it!
http://www.geocities.com/stillnmax
http://www.maximadriver.com
http://www.geocities.com/nodoubt711
http://www.geocities.com/stillnmax
http://www.maximadriver.com
http://www.geocities.com/nodoubt711
Thread
Thread Starter
Forum
Replies
Last Post
Slamrod
4th Generation Maxima (1995-1999)
5
04-10-2016 05:24 PM
MikesChevelle
5th Generation Maxima (2000-2003)
8
08-10-2015 11:21 AM