Congrats to 00boostedMax for getting featured in May issue of Super Street magazine
#44
Originally Posted by optimus310
![EEK!](https://maxima.org/forums/images/smilies/eek.gif)
![+1](https://maxima.org/forums/images/smilies/+1.gif)
![Squint](https://maxima.org/forums/images/smilies/squint.gif)
#49
Guest
Posts: n/a
Originally Posted by 007max
![+1](https://maxima.org/forums/images/smilies/+1.gif)
![Squint](https://maxima.org/forums/images/smilies/squint.gif)
#56
I never saw the car in SS, but in person that is on
car. EVERY part of it is hooked up. They did one hell of a job on the interior & it obviously looks very sweet. Overlall it looks like hes got most every part of the car covered. Those rotors of ****in huge. There is very little gap between he rim & rotor.
![Drool1](https://maxima.org/forums/images/smilies/drool1.gif)
#57
He got his car painted in San Gabriel, CA., one block from where I live. My car is going there next week for the front bumper and body kit paint & Installation.
Auto Network, In San Gabriel, CA.
Auto Network, In San Gabriel, CA.
#62
I almost missed the article, (it was kind of just stuffed in there), but when I saw it, that made me decide that I was subscribing to that magazine. It takes alot of ***** to put a maxima in a sport compact magazine. I bet next month thier letter section will be full of ****ed off civic and integra drivers. Great Maxima and an awesome way of representing the Max Community!
#66
First of all, thanks for the love! I'm glad you all like my Maxima!
A lot of people have worked very hard on that car! Sorry it took so long to post, but work has had me traveling a lot, so no time for the org until now.
The car pulled 235WHP and 206 ft/lbs torque on a Mustang Dyno (typically reads 20% lower than a dynojet) last May. That should be roughly 280WHP and 245 ft/lbs on a dynojet. Respectable for the SC kit I guess. Not enough with all the extra weight in it though. I have not dynoed with the spray yet, but have used it on the road and it definately kicks you in the butt.
Tomorrow Rob at SVC will pull out the SC to make sure it is working properly. Even with the 2.87" pulley, we're only getting 6.3 psi and the SC seems to be making a lot of noise (grinding noises...doesn't sound good).
When is the Tucson Max Meet? I will do my best to be there!
Thanks again!
Mark
![GrinNo](https://maxima.org/forums/images/smilies/grin_no.gif)
The car pulled 235WHP and 206 ft/lbs torque on a Mustang Dyno (typically reads 20% lower than a dynojet) last May. That should be roughly 280WHP and 245 ft/lbs on a dynojet. Respectable for the SC kit I guess. Not enough with all the extra weight in it though. I have not dynoed with the spray yet, but have used it on the road and it definately kicks you in the butt.
Tomorrow Rob at SVC will pull out the SC to make sure it is working properly. Even with the 2.87" pulley, we're only getting 6.3 psi and the SC seems to be making a lot of noise (grinding noises...doesn't sound good).
When is the Tucson Max Meet? I will do my best to be there!
Thanks again!
Mark
#69
don't know gonna have to check the West Coast forum for that one
we should have a local PHX meet one of these days, havnt had one in so long, plus all the new guys from tucson could drive up
you know about www.azmaximas.org right?
we should have a local PHX meet one of these days, havnt had one in so long, plus all the new guys from tucson could drive up
you know about www.azmaximas.org right?
Thread
Thread Starter
Forum
Replies
Last Post
sctludwig
3rd Generation Maxima (1989-1994)
8
09-01-2022 01:32 PM
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM