DYNO Results-- 3/31/01
03-31-2001, 12:02 PM
#1
Guest
Posts: n/a
Car: 2000 Maxima GXE 5-speed SuperCharged.
(No other mods...otherwise completely stock...even exhaust)
Dyno: DynoJet model 248...
Date: 3/31/01
Temp: 45 degrees
Humidity: 100% (raining)
Barometer: 29.7
Results:
Max Power: 246.9 HP @ 4600 RPM
Max Torque: 218.1 LB @ 6300 RPM
Adam's Excuses:
Excuse #1:
Based on the other 25 cars' results (who have dyno'ed on other dyno's) we realized this particular dyno was reading 10% less than everyone's previous dyno results.
So i figure the corrected HP to be about 260-270 HP.
Excuse #2:
I was running on my 19" rims as usual.
Excuse #3:
The MOST horsepower robbing factor was that I was STILL running factory exhaust...yes...with all 3 catalytic converters, stock y-pipe, stock b-pipe, stock muffler.
Looks like I'll be picking up at least 25-30HP once my 3" y-pipe, 3" cat & 3" cat-back are installed.
(No other mods...otherwise completely stock...even exhaust)
Dyno: DynoJet model 248...
Date: 3/31/01
Temp: 45 degrees
Humidity: 100% (raining)
Barometer: 29.7
Results:
Max Power: 246.9 HP @ 4600 RPM
Max Torque: 218.1 LB @ 6300 RPM
Adam's Excuses:
Excuse #1:
Based on the other 25 cars' results (who have dyno'ed on other dyno's) we realized this particular dyno was reading 10% less than everyone's previous dyno results.
So i figure the corrected HP to be about 260-270 HP.
Excuse #2:
I was running on my 19" rims as usual.
Excuse #3:
The MOST horsepower robbing factor was that I was STILL running factory exhaust...yes...with all 3 catalytic converters, stock y-pipe, stock b-pipe, stock muffler.
Looks like I'll be picking up at least 25-30HP once my 3" y-pipe, 3" cat & 3" cat-back are installed.
03-31-2001, 12:42 PM
#4
Senior Member
Join Date: Aug 2000
Posts: 470
Originally posted by My 4DSC
oh she'll be breathing alright!
oh she'll be breathing alright!
03-31-2001, 12:54 PM
#5
here is i30krab's after the s/c
4th gen i30, auto, cai, ypipe, and a few other goodies.
http://www.speakeasy.org/~celbrett/ron/Pc050023.jpg
u still going to atco tomorrow?
http://www.speakeasy.org/~celbrett/ron/Pc050023.jpg
u still going to atco tomorrow?
03-31-2001, 03:59 PM
#7
Donating Maxima.org Member
Join Date: Aug 2000
Posts: 867
Originally posted by skimax
hey, when i dynoed on my 19's with stock exhaust i made 230. with stocks rims and 3"exhaust i made 245, but these were done at two different dyno's so there could be some difference in figures or maybe not i don't know. just wanted to let you know that the numbers will go up for sure with your 3"whole exhaust setup.
hey, when i dynoed on my 19's with stock exhaust i made 230. with stocks rims and 3"exhaust i made 245, but these were done at two different dyno's so there could be some difference in figures or maybe not i don't know. just wanted to let you know that the numbers will go up for sure with your 3"whole exhaust setup.
he's 5speed should be putting more power out.. but im sure once the exhaust is done up adam will be able to show a lil more power
03-31-2001, 06:36 PM
#9
Senior Member
Join Date: Aug 2000
Location: Algonquin, IL
Posts: 311
Love that girl in your sig. NE more pics???
Originally posted by Phil96SE
Steve.. your automagic man he's 5speed should be putting more power out.. but im sure once the exhaust is done up adam will be able to show a lil more power
Steve.. your automagic man
he's 5speed should be putting more power out.. but im sure once the exhaust is done up adam will be able to show a lil more power
04-01-2001, 01:49 PM
#12
Guest
Posts: n/a
Originally posted by Synki
Good job Adam. I always thought a 2k S/Ced max would be making around 260-280hp. Oh well. Hey, where did you do this? I sitll want to dyno my car as well. Let me know Adam.
Good job Adam. I always thought a 2k S/Ced max would be making around 260-280hp. Oh well. Hey, where did you do this? I sitll want to dyno my car as well. Let me know Adam.
Jeez!
Hahahahahaaha
Thread
Thread Starter
Forum
Replies
Last Post
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM
Nismo87SE
3rd Generation Maxima (1989-1994)
5
10-23-2000 08:15 AM