Heads Up Display
03-05-2005, 08:00 PM
#1
Heads Up Display
So along with the other toys that I have been working on, I finally got to mount the LCD Screen for the zeitronix unit. The taps that I was using for the testing of the wire dont seem to make enough contact with the ecu, so I have no pics of the unit working just yet. I will correct the problem by the end of next week. What does everyone think?
safc and zeitronix side by side
a pillar
safc, zeitronix and radar detector
safc and zeitronix side by side
a pillar
safc, zeitronix and radar detector
03-05-2005, 10:50 PM
#2
That looks really nice Steve! Probably looks cool when driving too. 
Is there any way you can turn the displays off? I don't think I'd want em on all the time at night, especially if you want to keep a low profile.
Is there any way you can turn the displays off? I don't think I'd want em on all the time at night, especially if you want to keep a low profile.
03-06-2005, 08:31 PM
#9
Originally Posted by mzmtg
Do you really need to watch the SAFC while driving?
thats a lot of **** i wouldnt want infront of my face the whole time im driving. also wouldnt want it taking up all that window space.
03-07-2005, 05:06 AM
#10
Originally Posted by slimer
you cant see them due to the factory tint.
i like to monitor airflow. thats why i watch it. I want to know how much my maf is pushing.
i like to monitor airflow. thats why i watch it. I want to know how much my maf is pushing.
How much is enough?
03-07-2005, 10:04 AM
#12
if it gets close to maxing out i will shut it down.
It was either this way or an assload of gauges up the a pillar.
The zeitronix unit shows boost, egt and wb afr. I didn't want to go rice, so to put up two little screens makes it more out of the way.
After next week, I am bumping up to a 2.87 pulley and z32 maf and injectors.
It was either this way or an assload of gauges up the a pillar.
The zeitronix unit shows boost, egt and wb afr. I didn't want to go rice, so to put up two little screens makes it more out of the way.
After next week, I am bumping up to a 2.87 pulley and z32 maf and injectors.
03-07-2005, 10:27 AM
#13
Senior Member
Join Date: Apr 2004
Posts: 521
Great job Slimer 
! that gives me an idea 
. I might mount mine a little lower next to the a pillar. do you know where i can buy the bracket to hold the zeitronix unit?
can't wait to see your car, are you still comming down to texas?
! that gives me an idea . I might mount mine a little lower next to the a pillar. do you know where i can buy the bracket to hold the zeitronix unit?can't wait to see your car, are you still comming down to texas?
03-07-2005, 10:31 AM
#14
from what I've always heard, heads up display means projecting something (speed, tach, whatever) onto the windshield
either way, good job. I assume you're using those quicksplice taps. They make different sized ones (red, blue, yellow) so you can get them for different gauge wires if you're having trouble making a reliable connection at the ECU wiring.
either way, good job. I assume you're using those quicksplice taps. They make different sized ones (red, blue, yellow) so you can get them for different gauge wires if you're having trouble making a reliable connection at the ECU wiring.
03-07-2005, 10:37 AM
#15
craig-i used blue, which are a little bigger, i didnt have any red ones at 10pm when i wired it in.
royal-for the mounting, i bought an Apexi stand that comes with their rsm, avcr, and safc's. I am still planning on driving down for the wedding.
royal-for the mounting, i bought an Apexi stand that comes with their rsm, avcr, and safc's. I am still planning on driving down for the wedding.
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM
worldwiderecognized
6th Generation Maxima (2004-2008)
0
09-30-2015 01:16 PM