wanna see a badass exhaust?
What did you hook up the left hand exhaust to?
05-11-2001, 09:25 PM
#4
Originally posted by sx7r
dual 3" mandrel bent exhaust w/ Cattman 3" SS y-pipe, no cat, no mufflers, just a 3" resonator. needless to say - it's loud.
dual 3" mandrel bent exhaust w/ Cattman 3" SS y-pipe, no cat, no mufflers, just a 3" resonator. needless to say - it's loud.
05-11-2001, 09:57 PM
#5
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Aug 2000
Location: TX
Posts: 1,998
the exhaust splits before the b-pipe ends and goes across the rear beam. i wanted to split it right after the where the cat is, but the fuel tank is unevenly shaped. there's not enough space to fit a 3" on the drivers side - it'd have to be a small pipe if you wanted to do it that way because there are fuel lines there also.
bill: yeah, those are rx7 wheel, i just put them on yesterday.
bill: yeah, those are rx7 wheel, i just put them on yesterday.
05-11-2001, 10:18 PM
#7
Originally posted by sx7r
the exhaust splits before the b-pipe ends and goes across the rear beam. i wanted to split it right after the where the cat is, but the fuel tank is unevenly shaped. there's not enough space to fit a 3" on the drivers side - it'd have to be a small pipe if you wanted to do it that way because there are fuel lines there also.
the exhaust splits before the b-pipe ends and goes across the rear beam. i wanted to split it right after the where the cat is, but the fuel tank is unevenly shaped. there's not enough space to fit a 3" on the drivers side - it'd have to be a small pipe if you wanted to do it that way because there are fuel lines there also.
05-12-2001, 01:25 AM
#12
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Aug 2000
Location: TX
Posts: 1,998
Originally posted by Don in Texas
Adam (the NEW Climax) did that a few years ago....Same exhaust tips and everything, even the same color car......
Adam (the NEW Climax) did that a few years ago....Same exhaust tips and everything, even the same color car......
great minds think alike. =)
emax:
no, i didn't do it myself - i only wish i could weld as good as this exhaust guy does. he's one of the best in this area for mandrel bent exhausts. all the corvette guys, f-body guys, mustang guys go to him.
Llfe:
yes, those are Z28 tips.
Lordrandall:
the fronts fit fine but the rears need a thin spacer because the wheel will not go all the way against the hub - there's like 1/16inch space left. so close and yet so far.
Synki:
power gains? i haven't sprayed on the 3" exhaust yet.
05-12-2001, 07:08 AM
#13
Chrome RX7 rims, thats nice! nice exhaust too...
Feel any diference in acceleration with the lighter and smaller diameter RX7 rims? How wide were your old rims? I love the 8" wide RX rims! Glad that spacer thing worked out for ya in the back, its kinda a wierd thing. LOOKS REAL GOOD!!!
Feel any diference in acceleration with the lighter and smaller diameter RX7 rims? How wide were your old rims? I love the 8" wide RX rims! Glad that spacer thing worked out for ya in the back, its kinda a wierd thing. LOOKS REAL GOOD!!!
05-12-2001, 10:48 PM
#23
Senior Member
Join Date: Mar 2001
Posts: 1,142
Originally posted by Maximamike
Your ignorance blinds you. Do research, then open mouth/type.
Your ignorance blinds you. Do research, then open mouth/type.
Now, Iknow you are saying/typing/thinking "mmmmmm. Firefly 13" wheel. Light and downgrade my car"
05-12-2001, 11:06 PM
#24
Senior Member
Join Date: Jan 2001
Posts: 3,628
Originally posted by LoveSick
hmmmm, maybe you should get those 13" Firefly rims for your Maxima! They weight only 12lb. Since you think downgrading the car is cool, then you should go straight ahead!
Now, Iknow you are saying/typing/thinking "mmmmmm. Firefly 13" wheel. Light and downgrade my car"
hmmmm, maybe you should get those 13" Firefly rims for your Maxima! They weight only 12lb. Since you think downgrading the car is cool, then you should go straight ahead!
Now, Iknow you are saying/typing/thinking "mmmmmm. Firefly 13" wheel. Light and downgrade my car"
05-13-2001, 05:16 AM
#25
Senior Member
Join Date: Sep 2000
Posts: 807
emax95, I guess you would consider dual as a cosmetic change mostly, as it won't do anything (Maybe decrease) the performance of your SC'ed car by adding a more restrictive system with two mufflers and another split (rear Y).
05-13-2001, 06:39 AM
#26
Senior Member
Join Date: Aug 2000
Posts: 6,243
Originally posted by LoveSick
hmmmm, maybe you should get those 13" Firefly rims for your Maxima! They weight only 12lb. Since you think downgrading the car is cool, then you should go straight ahead!
Now, Iknow you are saying/typing/thinking "mmmmmm. Firefly 13" wheel. Light and downgrade my car"
hmmmm, maybe you should get those 13" Firefly rims for your Maxima! They weight only 12lb. Since you think downgrading the car is cool, then you should go straight ahead!
Now, Iknow you are saying/typing/thinking "mmmmmm. Firefly 13" wheel. Light and downgrade my car"
Lovesick there you go with your stupid ignorance again.
I'm telling you... you're gonna get smacked down everytime for saying some stupid stuff.
I thought we already had this disusion.
oh well.
05-13-2001, 07:11 AM
#27
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Aug 2000
Location: TX
Posts: 1,998
LoveSick:
well, one man's trash is another man's treasure - at least for me in this case. for the price, they were alot better than what i had to begin with. my old wheels were 47lbs each and they wouldn't hold a 255 tire.
AznWontonBoy:
i raced an rx7 and i won. =)
today's a nice day outside, i think i'll go make some vids and post later today.
well, one man's trash is another man's treasure - at least for me in this case. for the price, they were alot better than what i had to begin with. my old wheels were 47lbs each and they wouldn't hold a 255 tire.
AznWontonBoy:
i raced an rx7 and i won. =)
today's a nice day outside, i think i'll go make some vids and post later today.
05-13-2001, 08:35 AM
#28
Senior Member
Join Date: Aug 2000
Posts: 2,394
Originally posted by sx7r
today's a nice day outside, i think i'll go make some vids and post later today.
today's a nice day outside, i think i'll go make some vids and post later today.
Can't wait to hear it..
05-13-2001, 09:32 AM
#29
Senior Member
Join Date: Jan 2001
Posts: 3,628
Originally posted by sx7r
LoveSick:
well, one man's trash is another man's treasure - at least for me in this case. for the price, they were alot better than what i had to begin with. my old wheels were 47lbs each and they wouldn't hold a 255 tire.
AznWontonBoy:
i raced an rx7 and i won. =)
today's a nice day outside, i think i'll go make some vids and post later today.
LoveSick:
well, one man's trash is another man's treasure - at least for me in this case. for the price, they were alot better than what i had to begin with. my old wheels were 47lbs each and they wouldn't hold a 255 tire.
AznWontonBoy:
i raced an rx7 and i won. =)
today's a nice day outside, i think i'll go make some vids and post later today.
05-13-2001, 09:37 AM
#30
Senior Member
Join Date: Jan 2001
Posts: 3,628
Originally posted by yongjun
Lovesick there you go with your stupid ignorance again.
I'm telling you... you're gonna get smacked down everytime for saying some stupid stuff.
I thought we already had this disusion.
oh well.
Lovesick there you go with your stupid ignorance again.
I'm telling you... you're gonna get smacked down everytime for saying some stupid stuff.
I thought we already had this disusion.
oh well.
05-13-2001, 10:56 AM
#32
Guest
Posts: n/a
Man that looks sweet....Adam did that a few years ago himself on his 95. BTW, how did you get the RX7 wheels too fit and the 255s? Any rubbing, and what offset are those stock?
Originally posted by sx7r
dual 3" mandrel bent exhaust w/ Cattman 3" SS y-pipe, no cat, no mufflers, just a 3" resonator. needless to say - it's loud.
dual 3" mandrel bent exhaust w/ Cattman 3" SS y-pipe, no cat, no mufflers, just a 3" resonator. needless to say - it's loud.
05-13-2001, 02:49 PM
#36
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Aug 2000
Location: TX
Posts: 1,998
Originally posted by Russ2kSE
Man that looks sweet....Adam did that a few years ago himself on his 95. BTW, how did you get the RX7 wheels too fit and the 255s? Any rubbing, and what offset are those stock?
Man that looks sweet....Adam did that a few years ago himself on his 95. BTW, how did you get the RX7 wheels too fit and the 255s? Any rubbing, and what offset are those stock?
i got vids and pics, i'll post 'em later tonight, gotta go to gf's house now.
