General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Burnout questions

Thread Tools
 
Search this Thread
 
Old May 19, 2001 | 01:27 PM
  #1  
infinitiblast's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Oct 2000
Posts: 2,166
OK guys thinkin about taken my friends maxima to the nopi burnouts this year. How do you accomplish a good burnout in a maxima 5spd. Dont you have to change gears at some point.
Old May 19, 2001 | 01:31 PM
  #2  
blockburna's Avatar
Member
 
Joined: Jan 2001
Posts: 85
How do you do it in a automatic also?
Old May 19, 2001 | 02:20 PM
  #3  
gtr_rider's Avatar
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,617
From: Ft. Lauderdale, FL
in an auto, you just hold the hand brake really hard and acclerate slow and it just start spinning, don't know about manual though, sorry.
Old May 19, 2001 | 02:30 PM
  #4  
MAXINXS's Avatar
Donating Maxima.org Member
 
Joined: Apr 2001
Posts: 1,085
Burnout

I have a manual and have done this a few times. All I do is pull up the handbrake, rev her up, drop the clutch and hold on. The car tends to slide side to side.
Old May 19, 2001 | 04:27 PM
  #5  
infinitiblast's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Oct 2000
Posts: 2,166
gtr_rider

Hey in your splash page on your website that maxima to the right but up front. What type of rims are those I love those rims.
Old May 19, 2001 | 08:54 PM
  #6  
gtr_rider's Avatar
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,617
From: Ft. Lauderdale, FL
Re: gtr_rider

Originally posted by infinitiblast
Hey in your splash page on your website that maxima to the right but up front. What type of rims are those I love those rims.
to tell you the truth, I have no idea. Anyone else have the answer to this question.
Old May 19, 2001 | 09:51 PM
  #7  
Daddy Fat Sacks's Avatar
Senior Member
 
Joined: Apr 2001
Posts: 521
Re: gtr_rider

Originally posted by infinitiblast
Hey in your splash page on your website that maxima to the right but up front. What type of rims are those I love those rims.
I'm not positive but they look like nippon version 5's. I've seen this on a q45 and they look sweet.
Old May 19, 2001 | 09:55 PM
  #8  
Czar's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 1,020
this is how you do a burnout.......
Old May 20, 2001 | 05:38 AM
  #9  
Synki's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 5,631
From: NJ
Now this is how its done in a auto max (BTW, i was stock)



I have a even bigger burnout on video that is about 3 times if not more smoke then the one in the pic. If you guys are coming to the June 3rd meet, i can show ya there. Just bring a VCR and i can hook it up in my car.

In auto: I power brake it and then dump the brake and floor the car and yank up on e-brake. My car sits there spinning and sliding.

In 5speed: You rev up and have the e-brake up, and dump the clutch. You will keep revving, if you notice yourself getting too close to redline, let off some and resume revving again.
Old May 20, 2001 | 09:27 AM
  #10  
DA-MAX's Avatar
Eat, sleep, and sh*t 2JZ
iTrader: (10)
 
Joined: Nov 2000
Posts: 13,978
No, no, no CZAR....

this is a burnout!


Can we say VG AUTO!!!!!! HUHAHAHAHAHA!!

Originally posted by Czar
this is how you do a burnout.......
Old May 20, 2001 | 10:23 AM
  #11  
AznWontonboy's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 3,628
Re: No, no, no CZAR....

Originally posted by DA-MAX
this is a burnout!


Can we say VG AUTO!!!!!! HUHAHAHAHAHA!!

damn boy, thats hardcore ****!! doesnt that kill ur tranny???
Old May 20, 2001 | 10:40 AM
  #12  
infinitiblast's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Oct 2000
Posts: 2,166
Re: Re: gtr_rider

those look really close but the ones in the pic seem to have flatter spokes. They dont arc out as much as the ones in the pic. If anyone else has any ideas what those rims are please inform me.


Originally posted by Daddy Fat Sacks


I'm not positive but they look like nippon version 5's. I've seen this on a q45 and they look sweet.
Old May 20, 2001 | 12:51 PM
  #13  
Slickismax's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 1,161
From: Oklahoma City, OK
No, I have you all beat! I WON the Toyo tires burnout contest in my Max at the NHRA Import Drag Racing Series at Ennis, TX. I threw the tread on a brand new Proxes FZ4. It should be on ESPN2 one of these Sundays. As soon as I get a way to put the video on here, I will. BTW, I dropped it at redline in 2nd gear with the e-brake up and just stood on it for 45 seconds....until the tire blew out!!
Old May 20, 2001 | 01:06 PM
  #14  
JC's Avatar
JC
Donating Maxima.org Member
 
Joined: Oct 2000
Posts: 129
Burnout

Every time i try to make a good one my Max won't sit there once the front tires get warmup it'll drag my locked rear tires.
Old May 20, 2001 | 02:10 PM
  #15  
DA-MAX's Avatar
Eat, sleep, and sh*t 2JZ
iTrader: (10)
 
Joined: Nov 2000
Posts: 13,978
Thats The Max's car...

form Auatralia.....Level 10, Stage 3 Trans, so I doubt he has many worries!

Originally posted by AznWontonboy


damn boy, thats hardcore ****!! doesnt that kill ur tranny???
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Unclejunebug
5th Generation Maxima (2000-2003)
10
Apr 2, 2016 05:42 AM
Stagnet04
4th Generation Classifieds (1995-1999)
2
Oct 11, 2015 08:16 PM
Socalstillen
4th Generation Maxima (1995-1999)
1
Sep 26, 2015 12:01 PM




All times are GMT -7. The time now is 02:05 PM.