I got my NOS kit today, open it up and... NO INSTRUCTIONS! Does anyone have these in an emailable format, or know a link to them? Any help GREATLY appreciated. Thanks in advance.

 

If you e-mailed me check your e-mail their waiting for you.

 

That was funny I was just posting you link...
http://www.zing.com/album/?id=429305...77029038&idx=1

 

the instructions is in there.. check the bottom side of the NOS kit where the nozzles and all the fittings are..

when i opened up my JC Whitney kit i said the same thing.. but i kept looking and i found it

 

I tore everything apart already looking for it, and just looked one more time to be certain after reading your post. My kit came in the box, with the bottle in it's own box inside, and one cardboard board with a bunch of pieces shrink-wrapped to it, lines wires, solenoids, etc. Could I be missing something else? I know there are no instructions in there though.

 

Unfortunately the parts list is in the instruction booklet. You will, however, need to buy 4 nuts and bolts to secure the bottle brackets. I believe NOS recommends at least 5/16"

 

i don't remeber where my instructions where.. if they were on the other side of the shrink wrap stuff.. i think so.. i think they were on the other side of shrink wrap stuff..

but i know i flipped otu when i thought i couldn't find them..

anyway.. if Matt didn't already email it to you .. i can email you the instructions in a pdf file

 

Got them from Mardigras already, thanx anyway. I opened the shrink wrap and the only paperwork in there was the warrenty crap. I called Holley and they are going to send me some instructions. Started on it today, but didn't get very far! LD