regarding body kit

Reply Subscribe

Thread Tools

Search this Thread

07-18-2005, 08:25 AM

kajeno

Member

Thread Starter

iTrader: (1)

Join Date: Oct 2000

Location: St Louis Park, MN

Posts: 235

regarding body kit

I bought a used stillen kit and need to remove the paint and fix some screw holes on the side and rear pieces. What are your experiences doing this? Which products did you use? Thanks much.

07-18-2005, 08:38 AM

A33 VQ30DEK

Senior Member

iTrader: (23)

Join Date: Dec 2002

Location: Millbrae, CA

Posts: 3,781

have the body shop do it.

07-18-2005, 09:23 AM

kajeno

Member

Thread Starter

iTrader: (1)

Join Date: Oct 2000

Location: St Louis Park, MN

Posts: 235

Has someone done it him/herself? I will send the kit to the bodyshop for priming and painting but I would do most of the prep work myself.

07-18-2005, 07:58 PM

maxgtr2000

KH3 by popular demand

iTrader: (29)

Join Date: Sep 2004

Location: Detroit, MI

Posts: 3,104

The body shop can do that for you, unless you know what you are doing they would have to fix what you did anyway. If you are wanting to do some prep work get some Window Weld from Home Depot or Lowes and fill the holes with that. Let it cure a day or two then sand down the filled holes with like a 120 grit. other than that I would leave it to the shop, you're paying them good money anyway, let them earn it.