General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Need help with car problem

Old Mar 12, 2007 | 01:38 AM
  #1  
QBridge's Avatar
Thread Starter
Member
 
Joined: Feb 2006
Posts: 66
Need help with car problem

My car leaks oil. It's not the drain plug and it's not the oil pan. I changed the oil pressure switch and it still leaks oil. The oil sending unit was replaced and so was the main oil seal. Is there anyone here from Atlanta that can look at my car and tell me where it's leaking from? I'm in N Atlanta.

I'm not going to go to any dealership or shop. This car has been touched by a few mechanics before I got it and they ****ed up the car worse then it was before they fixed it.
Old Mar 12, 2007 | 08:00 AM
  #2  
oldngivout's Avatar
Willing to learn
iTrader: (8)
 
Joined: May 2004
Posts: 1,277
From: Murfreesboro, TN
What kind of car is it?
Old Mar 12, 2007 | 09:43 AM
  #3  
QBridge's Avatar
Thread Starter
Member
 
Joined: Feb 2006
Posts: 66
97 Maxima. I can travel anywhere in the Atlanta area.
Old Mar 12, 2007 | 04:17 PM
  #4  
i30krab's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 995
From: Las Vegas, NV
Originally Posted by QBridge
My car leaks oil. It's not the drain plug and it's not the oil pan. I changed the oil pressure switch and it still leaks oil. The oil sending unit was replaced and so was the main oil seal. Is there anyone here from Atlanta that can look at my car and tell me where it's leaking from? I'm in N Atlanta.

I'm not going to go to any dealership or shop. This car has been touched by a few mechanics before I got it and they ****ed up the car worse then it was before they fixed it.
Valve cover, especially the rear?
Old Mar 12, 2007 | 04:45 PM
  #5  
snair2's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 276
If it's not the valve cover, check out the timing chain cover.
Old Mar 13, 2007 | 01:53 AM
  #6  
QBridge's Avatar
Thread Starter
Member
 
Joined: Feb 2006
Posts: 66
Originally Posted by i30krab
Valve cover, especially the rear?
I didn't even look at the valve cover. I'll look today.
It is the valve cover. Does anyone know where I can look at a write up on how to change the gasket or gaskets? It's not hard but I want to make sure before I do anything.
Old Mar 13, 2007 | 09:00 PM
  #7  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
fsm would be a great help to you.

In short you just need to remove the upper plenum to get to the valve cover, and replace the gasket and re-apply new rtv sealant.

but there are many steps to take, make sure you know where goes where and what you do with the nuts and bolts you take off.
Old Mar 18, 2007 | 12:14 PM
  #8  
TwonGA958's Avatar
Newbie - Just Registered
 
Joined: Mar 2007
Posts: 2
HELP! Audio system

My friend and I have been working on this for a while. Guess you can call us noobz or whatever, but we are trying to find a suitable place to put our wire through the firewall. It's a '94 Maxima. We don't want to have to drill through th fire wall unless we have to. If anyone has a system in a 94 Maxima could possibly help us out by telling us what you did to install it or send a picture so we can see where you put it thorugh? Thanks.
Old Mar 18, 2007 | 04:00 PM
  #9  
Greeny's Avatar
¯\(°_o)/¯
iTrader: (43)
 
Joined: Sep 2003
Posts: 64,424
From: Tunasea
Originally Posted by TwonGA958
My friend and I have been working on this for a while. Guess you can call us noobz or whatever, but we are trying to find a suitable place to put our wire through the firewall. It's a '94 Maxima. We don't want to have to drill through th fire wall unless we have to. If anyone has a system in a 94 Maxima could possibly help us out by telling us what you did to install it or send a picture so we can see where you put it thorugh? Thanks.

Nice job posting in a thread that has absolutely nothing to do with your problem..
Old Mar 19, 2007 | 11:01 AM
  #10  
Byteme's Avatar
Junior Member
 
Joined: Oct 2006
Posts: 24
Originally Posted by TwonGA958
My friend and I have been working on this for a while. Guess you can call us noobz or whatever, but we are trying to find a suitable place to put our wire through the firewall. It's a '94 Maxima. We don't want to have to drill through th fire wall unless we have to. If anyone has a system in a 94 Maxima could possibly help us out by telling us what you did to install it or send a picture so we can see where you put it thorugh? Thanks.
If you can't find a suitable grommet, you very well may have to drill. Sometimes it cannot be avoided. Checkout www.caraudioforum.com, they have many weelqualified experts, and I am there as well.
Old Mar 20, 2007 | 10:35 AM
  #11  
TwonGA958's Avatar
Newbie - Just Registered
 
Joined: Mar 2007
Posts: 2
Originally Posted by MyGreenMax94
Nice job posting in a thread that has absolutely nothing to do with your problem..
Technically it does. I'm having a problem with my car. I can't get the audio I want to sound good not to mention I can't post a thread yet with the new posting system they have up and this is the closet thing I could fine to that. Suggestion please don't try and put you're two cents in where not needed. If you can't help then that's all you have to say. Not try to riddicule other people who are having problems "with there car".
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
14
Nov 7, 2024 07:31 PM
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
Samedi
4th Generation Maxima (1995-1999)
11
Aug 13, 2015 04:05 PM
erniel
7th Generation Maxima (2009-2015)
1
Aug 8, 2015 09:32 AM
yat70458
5th Generation Maxima (2000-2003)
2
Aug 3, 2015 01:16 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:06 AM.