maxdrvr847

iTrader: (1)

ok trying to install my ypipe right now, have old one off and was trying to install new cattman one. with the front pipe and short rear pipe, i cant get them on at the same time, its like get front one on rear wont go on, vise serva, and they wont go on at same time, anyone had this problem or is just im doing something dumb???

please help!!!!!!!!!!!!!!

dmbmaxima2k2

iTrader: (1)

This is a common Cattman Problem. you need to put a bar in each pipe tube and bend them closer or farther apart depending on what's wrong with it. i've heard this story many times. and people still wonder why i got a WSP one.

sx7r

iTrader: (15)

cattman pipes are tight fitting. all 3 of mine have been like that. just get a friend to help you force it on. or use a rubber mallet and bang on it. good luck.

maxdrvr847

iTrader: (1)

yeah big hammer did the trick

JDwyer2821

Mine was a tight fit too

UMD_MaxSE

iTrader: (1)

mine was a little tight also, but it fit just fine. It took a little pushing, but worked out great.