OMG!! 0-60 MPH in 5.98 Seconds!!!!
#1
OMG!! 0-60 MPH in 5.98 Seconds!!!!
I finally completed my personaly goal for my NA 5spd 95 maxima!!!{103K miles} Thats right 0-60 in 5.98 seconds with just bolt on's!! I used my G-Tech pro to do the measurements. I have been hitting up the same spot of flat ground since I was stock and I use to average about 6.4-6.6. Then after I put all my mods on I averaged about 6.2-6.3. I changed my fuel filter today and now my car is a bat out of hell! The thing is noticably quicker as proven by my 5.98 to 60 mph! . Who ever said mods don't work? . BTW My fully modded SC 5spd I30T use to nail 0-60 in 5.98-6.1 on average, once I nailed 0-60 in 5.44, traction was a real problem.
What do you guys thing?! Sweeeet!
FYI I had a full interior and 1/4 tank of gas. I did two other runs, one 6.09{Another record} and 6.19!
What do you guys thing?! Sweeeet!
FYI I had a full interior and 1/4 tank of gas. I did two other runs, one 6.09{Another record} and 6.19!
#4
All right Baller .
Another thing, I think I may have fixed my starting problem!! My fuel filter was clogged big time, the gas was almost black comming out of it! I just started my car up 4 times perfectly, atleast 2 of thode times would have caused a big problem normaly, I will update that issue as I drive the car more today.
Another thing, I think I may have fixed my starting problem!! My fuel filter was clogged big time, the gas was almost black comming out of it! I just started my car up 4 times perfectly, atleast 2 of thode times would have caused a big problem normaly, I will update that issue as I drive the car more today.
#6
I hear they read a little on the fast side but for emax's case, it's really good for comparasions of mods etc.. He used the same stretch of road so it should be pretty consisant. You should not be looking at the times perse, but the improvement of the times after each mod.
But emax, if you get times even close to those on the track, I'm really proud of ya!
But emax, if you get times even close to those on the track, I'm really proud of ya!
Originally posted by Soon2BMaxed
thats sweet but isn't the g-tech known for inaccuracy? plz don't flame i don't know **** about g-techs....
thats sweet but isn't the g-tech known for inaccuracy? plz don't flame i don't know **** about g-techs....
#10
Originally posted by Jeff92se
I hear they read a little on the fast side but for emax's case, it's really good for comparasions of mods etc.. He used the same stretch of road so it should be pretty consisant. You should not be looking at the times perse, but the improvement of the times after each mod.
But emax, if you get times even close to those on the track, I'm really proud of ya!
I hear they read a little on the fast side but for emax's case, it's really good for comparasions of mods etc.. He used the same stretch of road so it should be pretty consisant. You should not be looking at the times perse, but the improvement of the times after each mod.
But emax, if you get times even close to those on the track, I'm really proud of ya!
Another thing, my max's starting problem is gone! I drove around town today and made a bunch of stops, each time the car fired right up with no problem!
#11
Sure feels nice to finally figure it out. Glad you got it running good.
Originally posted by emax95
Thanks, the G-Tech seems pretty acurate becuase when my max was stock it would often hit 60 MPH at 6.6, which is was MT tested it at. Also if I run my I30 0-60 it usualy takes 7.0-7.1, which again is what MT got for times. Either way I know my max is right around 5.-6.1 0-60mph, I'm going with the 5.9!
Another thing, my max's starting problem is gone! I drove around town today and made a bunch of stops, each time the car fired right up with no problem!
Thanks, the G-Tech seems pretty acurate becuase when my max was stock it would often hit 60 MPH at 6.6, which is was MT tested it at. Also if I run my I30 0-60 it usualy takes 7.0-7.1, which again is what MT got for times. Either way I know my max is right around 5.-6.1 0-60mph, I'm going with the 5.9!
Another thing, my max's starting problem is gone! I drove around town today and made a bunch of stops, each time the car fired right up with no problem!
#13
Originally posted by Soon2BMaxed
thats sweet but isn't the g-tech known for inaccuracy? plz don't flame i don't know **** about g-techs....
thats sweet but isn't the g-tech known for inaccuracy? plz don't flame i don't know **** about g-techs....
#14
Nice emax, i wanna see your cars, we gotta meet up sometime seeing as i am real close to you, PM me we can have a little mini meet if you know anybody else around the Providence area. I used gtech when i had intake and exhaust and 18inch rims, i hit 6.4 seconds 0-60 and like 14.8 1/4
#17
Originally posted by SprintMax
G-Tech is Bullsh!t..
anyway.. shout out to Squishy...
G-Tech is Bullsh!t..
anyway.. shout out to Squishy...
#18
Daren, I agreee that 1/4 mile times and HP #'s from the G-Tech are not 100% accurate, but I have only heard and seen good things about there 0-60 times. BTW Soory if I was rued above..
#20
Originally posted by emax95
Daren, I agreee that 1/4 mile times and HP #'s from the G-Tech are not 100% accurate, but I have only heard and seen good things about there 0-60 times. BTW Soory if I was rued above..
Daren, I agreee that 1/4 mile times and HP #'s from the G-Tech are not 100% accurate, but I have only heard and seen good things about there 0-60 times. BTW Soory if I was rued above..
Squishy.. yes the VQ has headers.. he got them from New Zealand
#21
Originally posted by SprintMax
i am just sick of all those 13 sec CL-S who only run on G-Tech .. so i hate the product..
Squishy.. yes the VQ has headers.. he got them from New Zealand
i am just sick of all those 13 sec CL-S who only run on G-Tech .. so i hate the product..
Squishy.. yes the VQ has headers.. he got them from New Zealand
Bryan H, like Sprint said, I got them imported from Zew Zealand.
#22
Emax:
I've used a G-Tech earlier in the year at the track noticed they do seem to be off a little. I was getting consistent 14.7-14.8s@94 at the track, but the G-Tech was reading 14.4-14.5@98mph. 0-60 times were in the 5.7-5.8 range. I have a little trouble believing that I've shaved .6-.7 off my 0-60. Thought I'd just give my input.
Bryan:
It seems the headers don't make anymore power than a y-pipe. If Ethan would have made 185fwhp+/200fwtq+ with the headers, I would have been in line. Unfortunately, Ethan's Max only made 170fwhp/185fwtq or something like that. You still considering a Maxima?
Dave
I've used a G-Tech earlier in the year at the track noticed they do seem to be off a little. I was getting consistent 14.7-14.8s@94 at the track, but the G-Tech was reading 14.4-14.5@98mph. 0-60 times were in the 5.7-5.8 range. I have a little trouble believing that I've shaved .6-.7 off my 0-60. Thought I'd just give my input.
Bryan:
It seems the headers don't make anymore power than a y-pipe. If Ethan would have made 185fwhp+/200fwtq+ with the headers, I would have been in line. Unfortunately, Ethan's Max only made 170fwhp/185fwtq or something like that. You still considering a Maxima?
Dave
#23
[QUOTE]Originally posted by Dave B
[B]Emax:
I've used a G-Tech earlier in the year at the track noticed they do seem to be off a little. I was getting consistent 14.7-14.8s@94 at the track, but the G-Tech was reading 14.4-14.5@98mph. 0-60 times were in the 5.7-5.8 range. I have a little trouble believing that I've shaved .6-.7 off my 0-60. Thought I'd just give my input.
Bryan:
It seems the headers don't make anymore power than a y-pipe. If Ethan would have made 185fwhp+/200fwtq+ with the headers, I would have been in line. Unfortunately, Ethan's Max only made 170fwhp/185fwtq or something like that. You still considering a Maxima?
173HP and 178 TQ.
I am going to try to dyno my car again tomarrow maybe! I know it won't have any relivence to my Headers but I think my car is going to put down atleast 185 FWHP this time around, I have done a lot of tuneup and exaust leak repair +'s a UDP.
Now for the G-Tech, if you drive down hill or hit bumps it will screw up it's reading, maybe the terrain you tested on was no good? Just a idea.. BTW I still can't brake 15 seconds in the 1/4 mile with my G-Tech, I just did a 15.03 @ 98.2 MPH! If anything it seem's like my G-tech reads slow .
[B]Emax:
I've used a G-Tech earlier in the year at the track noticed they do seem to be off a little. I was getting consistent 14.7-14.8s@94 at the track, but the G-Tech was reading 14.4-14.5@98mph. 0-60 times were in the 5.7-5.8 range. I have a little trouble believing that I've shaved .6-.7 off my 0-60. Thought I'd just give my input.
Bryan:
It seems the headers don't make anymore power than a y-pipe. If Ethan would have made 185fwhp+/200fwtq+ with the headers, I would have been in line. Unfortunately, Ethan's Max only made 170fwhp/185fwtq or something like that. You still considering a Maxima?
173HP and 178 TQ.
I am going to try to dyno my car again tomarrow maybe! I know it won't have any relivence to my Headers but I think my car is going to put down atleast 185 FWHP this time around, I have done a lot of tuneup and exaust leak repair +'s a UDP.
Now for the G-Tech, if you drive down hill or hit bumps it will screw up it's reading, maybe the terrain you tested on was no good? Just a idea.. BTW I still can't brake 15 seconds in the 1/4 mile with my G-Tech, I just did a 15.03 @ 98.2 MPH! If anything it seem's like my G-tech reads slow .
#24
Re: OMG!! 0-60 MPH in 5.98 Seconds!!!!
Originally posted by emax95
I finally completed my personaly goal for my NA 5spd 95 maxima!!!{103K miles} Thats right 0-60 in 5.98 seconds with just bolt on's!! I used my G-Tech pro to do the measurements. I have been hitting up the same spot of flat ground since I was stock and I use to average about 6.4-6.6. Then after I put all my mods on I averaged about 6.2-6.3. I changed my fuel filter today and now my car is a bat out of hell! The thing is noticably quicker as proven by my 5.98 to 60 mph! . Who ever said mods don't work? . BTW My fully modded SC 5spd I30T use to nail 0-60 in 5.98-6.1 on average, once I nailed 0-60 in 5.44, traction was a real problem.
What do you guys thing?! Sweeeet!
FYI I had a full interior and 1/4 tank of gas. I did two other runs, one 6.09{Another record} and 6.19!
I finally completed my personaly goal for my NA 5spd 95 maxima!!!{103K miles} Thats right 0-60 in 5.98 seconds with just bolt on's!! I used my G-Tech pro to do the measurements. I have been hitting up the same spot of flat ground since I was stock and I use to average about 6.4-6.6. Then after I put all my mods on I averaged about 6.2-6.3. I changed my fuel filter today and now my car is a bat out of hell! The thing is noticably quicker as proven by my 5.98 to 60 mph! . Who ever said mods don't work? . BTW My fully modded SC 5spd I30T use to nail 0-60 in 5.98-6.1 on average, once I nailed 0-60 in 5.44, traction was a real problem.
What do you guys thing?! Sweeeet!
FYI I had a full interior and 1/4 tank of gas. I did two other runs, one 6.09{Another record} and 6.19!
Congrats,
now take her to the track before you sell her and strip it down... Give "theblue" a run for his money!
#25
dave, yep that i am
trying to talk my dad out of his 98 auto se
yes i said auto
why?
supercharger
and im getting used to the auto anyways.
plus its a very clean car and would be perfect to build a comp system in.
who knows. but that car is near the top of my list
trying to talk my dad out of his 98 auto se
yes i said auto
why?
supercharger
and im getting used to the auto anyways.
plus its a very clean car and would be perfect to build a comp system in.
who knows. but that car is near the top of my list
#27
Originally posted by Lime
headers are considered bolt-ons?
headers are considered bolt-ons?
#28
Let me help you with your logic. Nitrous, SCs and turbos are just like steroids for humans.
DW
DW
Originally posted by mingo
i'm not sure about others, but with me anything that just bolts on is considered as a bolt on.. except for nitrous, becuase you hafta drill into the intake manifolds.. turbos and superchargers are also considered as bolt ons in my book.. but hten again i'm known for my faulty logic
i'm not sure about others, but with me anything that just bolts on is considered as a bolt on.. except for nitrous, becuase you hafta drill into the intake manifolds.. turbos and superchargers are also considered as bolt ons in my book.. but hten again i'm known for my faulty logic
#31
Originally posted by mingo
i'm not sure about others, but with me anything that just bolts on is considered as a bolt on.. except for nitrous, becuase you hafta drill into the intake manifolds.. turbos and superchargers are also considered as bolt ons in my book.. but hten again i'm known for my faulty logic
i'm not sure about others, but with me anything that just bolts on is considered as a bolt on.. except for nitrous, becuase you hafta drill into the intake manifolds.. turbos and superchargers are also considered as bolt ons in my book.. but hten again i'm known for my faulty logic
#32
Originally posted by gLok
supercharger MAYBE but a turbo requires drilling of the oil pan amongst other things. So by your logic its not a bolt on.
supercharger MAYBE but a turbo requires drilling of the oil pan amongst other things. So by your logic its not a bolt on.
#35
Originally posted by MaximaRider
Nice emax, i wanna see your cars, we gotta meet up sometime seeing as i am real close to you, PM me we can have a little mini meet if you know anybody else around the Providence area. I used gtech when i had intake and exhaust and 18inch rims, i hit 6.4 seconds 0-60 and like 14.8 1/4
Nice emax, i wanna see your cars, we gotta meet up sometime seeing as i am real close to you, PM me we can have a little mini meet if you know anybody else around the Providence area. I used gtech when i had intake and exhaust and 18inch rims, i hit 6.4 seconds 0-60 and like 14.8 1/4
#36
Has anyone seen the pics of the time? I saw them and the strip of road that they used was definitely going slightly downhill (you can see it by looking at the horizon). This might have contributed to the times. The other thing to consider is the driver...my boss owns a WRX and we were talking about it the other day:
Fastest launch: rev to just when the Turbo kicks in and drop the clutch. But you can't do this every day, at every stop light, unless you plan on doing major repairs on your vehicle.
Similiarly, it's fully possible that these guys (I didn't watch the show) did a "trick" (what I call it) launch.
5.9 is a little ridiculous...even the guys on the Altima forums were saying that.
The 7.2~7.3 for the auto in C&D seems much more plausible.
Fastest launch: rev to just when the Turbo kicks in and drop the clutch. But you can't do this every day, at every stop light, unless you plan on doing major repairs on your vehicle.
Similiarly, it's fully possible that these guys (I didn't watch the show) did a "trick" (what I call it) launch.
5.9 is a little ridiculous...even the guys on the Altima forums were saying that.
The 7.2~7.3 for the auto in C&D seems much more plausible.
#37
Ethan-
I used the G-Tech while I was at the track. It's smooth and level.
Everyone-
I've watched Motorweek and the track they use is clearly down hill. I saw this weeks segment and they got a 15.1@94mph out of the IS300 wagon which is a little far fetched, especially the trap speed. They also got a 105 mph trap speed out of the Bullit Mustang. It is clear to me that their times and mphs are about .3-.4 lower and 5mph higher than everyone elses times.
Dave
I used the G-Tech while I was at the track. It's smooth and level.
Everyone-
I've watched Motorweek and the track they use is clearly down hill. I saw this weeks segment and they got a 15.1@94mph out of the IS300 wagon which is a little far fetched, especially the trap speed. They also got a 105 mph trap speed out of the Bullit Mustang. It is clear to me that their times and mphs are about .3-.4 lower and 5mph higher than everyone elses times.
Dave
#38
I wouldn't be surprised if the Manual Alti's do 6.5~6.7.
Considering I35 does 6.9 auto, I would say 6.2~6.4 for manual seems fair with the right driver(Max can't be that much off from those numbers).
G35 I estimate 5.9~6.1 manual
350z, all known facts considered: 5.7-5.9 Possibly lower (I'm hoping < 5.5, but it's a stretch considering these guys all basically have the same 3.5L). Note that the two latter cars are RWD.
Considering I35 does 6.9 auto, I would say 6.2~6.4 for manual seems fair with the right driver(Max can't be that much off from those numbers).
G35 I estimate 5.9~6.1 manual
350z, all known facts considered: 5.7-5.9 Possibly lower (I'm hoping < 5.5, but it's a stretch considering these guys all basically have the same 3.5L). Note that the two latter cars are RWD.