running a 5.9 dodge dakota
#41
Originally posted by ReichMax97
Also, is that GMC truck called the typhoon or the cyclone, are they 2 different things or is it the Typhoon?
Also, is that GMC truck called the typhoon or the cyclone, are they 2 different things or is it the Typhoon?
-Cyrus
#42
I've seen a 5.9 R/T with a Kenne Bell supercharger on it at the track.
In the 1/8 mile he runs a 9.7 spinning over half way down the track.
I've also seen him run a 9.2 when it sort of hooks up.
I have also seen a regular r/t run a 9.5 with a lot of tire spin.
Just my opinion, but if he just stomps on the gas expecting to win, you could use that to your advantage through 1st and 2nd. By the time 3rd gets there, he will be pulling on you.
My .02
Daniel
In the 1/8 mile he runs a 9.7 spinning over half way down the track.
I've also seen him run a 9.2 when it sort of hooks up.
I have also seen a regular r/t run a 9.5 with a lot of tire spin.
Just my opinion, but if he just stomps on the gas expecting to win, you could use that to your advantage through 1st and 2nd. By the time 3rd gets there, he will be pulling on you.
My .02
Daniel
#46
Originally posted by JUDE
I messed around with one on the highway. I was pulling slowly on him at about 110.
I messed around with one on the highway. I was pulling slowly on him at about 110.
bug intentionally left in the engine's computer that limits top speed to 110 mph." - Motor Trend
#47
and this is why we dont like ford :P
the 340 isnt too bad either. thats what my science teacher is putting in his 71 cuda, the vins are with in 2 weeks of each other, very very lucky find, that motor is gonna scream. his sisters boyfriend works for the parts department at one of the local dodge dealers so it makes both of our lives alot easier (or cheaper atleast).
MrGone
btw, line up my friends dad's ****** against those. its a 11 second N/A 454 with a TH400 (very very built ) his dad is mad because hes going to have to put wheelie bars on it, hes gonna make them motorized and they will slide under the car. rumble rumble rumble is how it goes.
btw, there is no replacement for displacement, sorry to pop your bubble.
the 340 isnt too bad either. thats what my science teacher is putting in his 71 cuda, the vins are with in 2 weeks of each other, very very lucky find, that motor is gonna scream. his sisters boyfriend works for the parts department at one of the local dodge dealers so it makes both of our lives alot easier (or cheaper atleast).
MrGone
btw, line up my friends dad's ****** against those. its a 11 second N/A 454 with a TH400 (very very built ) his dad is mad because hes going to have to put wheelie bars on it, hes gonna make them motorized and they will slide under the car. rumble rumble rumble is how it goes.
btw, there is no replacement for displacement, sorry to pop your bubble.
Thread
Thread Starter
Forum
Replies
Last Post
JoshG
4th Generation Maxima (1995-1999)
51
09-21-2015 10:41 PM
RWCreative
4th Generation Maxima (1995-1999)
9
09-21-2015 11:01 AM
ballerchris510
3rd Generation Maxima (1989-1994)
9
09-10-2015 09:35 PM