Tip for Clear Corners people

Reply Subscribe

Thread Tools

Search this Thread

12-13-2001, 08:01 AM

dwapenyi

Supporting Maxima.org Member

Thread Starter

iTrader: (3)

Join Date: Sep 2000

Posts: 6,016

Tip for Clear Corners people

A bulb blew in my front turn signal, so I got the manual out since I didn't remember how to take the lights apart. The DIY section states that you can pry apart the lights with a screwdriver. I did it with my clear corners and the thing was not budging. Later, I vaguely recalled that I screwed in the light with a 10mm screw from inside the fender. That was what was stopping me! I'm so damn forgetfull! Anyway, I put a note in the manual right on the picture showing that my lights are now secured from inside the fender. I almost broke my clears just changing out a damn bulb!

DW

12-13-2001, 08:45 AM

Gotrice4

Senior Member

Join Date: Sep 2000

Posts: 1,291

Re: Tip for Clear Corners people

Quote:

Originally posted by dwapenyi
A bulb blew in my front turn signal, so I got the manual out since I didn't remember how to take the lights apart. The DIY section states that you can pry apart the lights with a screwdriver. I did it with my clear corners and the thing was not budging. Later, I vaguely recalled that I screwed in the light with a 10mm screw from inside the fender. That was what was stopping me! I'm so damn forgetfull! Anyway, I put a note in the manual right on the picture showing that my lights are now secured from inside the fender. I almost broke my clears just changing out a damn bulb!

DW

Already broke my corner lens...even after i took the screw out...that lens is just stubborn sometimes...