General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Ok, So, I want to spraypaint my rims ;)

Old Jan 3, 2002 | 12:32 AM
  #1  
CKNY's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 2,203
Ok, So, I want to spraypaint my rims ;)

hehe... I just took my 18" chrome revo's off for the winter (******* snow) and put back my pos silver 15" enkei's. Seriously, I feel like a lesser man. The car looks like ***. It is faster however!

Anyway, the point of this post. Am I crazy for wanting to spraypaint my 15's rims black? I know if I really wanted it done right I should have them powdercoated but I don't feel like spending that money on winter rims. The rims are in some cruddy shape and I think I'd like to spray them with a dozen coats of gloss black just to do something a little different. Someone give me some opinions here? Would the paint hold up at all?

Am I nuts? Maybe it's time to go to sleep. =)
Old Jan 3, 2002 | 12:34 AM
  #2  
Nismo's Avatar
Senior Member
iTrader: (18)
 
Joined: Dec 2000
Posts: 8,749
From: CA
There is some special paint thats made for painting rims. Let me find the name of that stuff for you.
Old Jan 3, 2002 | 12:35 AM
  #3  
Jeff92se's Avatar
I'm needing a caw
iTrader: (82)
 
Joined: Aug 2000
Posts: 34,127
Don't do it unless you really prep them well. I mean take a few hours of sanding on each rim. Then use automotive paint not spray paint.

If you don't, it will look like absolute crap after is starts chipping/flaking away.
Old Jan 3, 2002 | 12:42 AM
  #4  
Nismo's Avatar
Senior Member
iTrader: (18)
 
Joined: Dec 2000
Posts: 8,749
From: CA
Ok the paint is made by Dupli-Color

Website- www.Duplicolor.com phone# 1-800-247-3270
Old Jan 3, 2002 | 04:09 AM
  #5  
Micah95GLE's Avatar
Donating Maxima.org Member
 
Joined: Aug 2000
Posts: 2,931
Yeah, you have to sand the original finish off of the wheels before you paint. Otherwise, the new paint won't stick.
Old Jan 3, 2002 | 08:16 AM
  #6  
carnal_c30's Avatar
Former Sponsor
iTrader: (38)
 
Joined: Nov 2000
Posts: 7,799
From: Everywhere, CA
someone on the Altima forums primered and painted their black wheels black... made them very shiny
if you're interested interested check out www.altimas.net
Old Jan 3, 2002 | 08:33 AM
  #7  
Bman's Avatar
Donating Maxima.org Member
 
Joined: Aug 2001
Posts: 2,940
Originally posted by Jeff92se
Don't do it unless you really prep them well. I mean take a few hours of sanding on each rim. Then use automotive paint not spray paint.

If you don't, it will look like absolute crap after is starts chipping/flaking away.
Yep, at the last local meet a guy painted his Enkeis (can't remember if it was clear coat or black colour) and it was flaking off.

I think surface prep is key (make sure the surface is dust-free, clean, and ROUGH) and maybe check into paint incompatabilities too.
Old Jan 3, 2002 | 10:41 AM
  #8  
CKNY's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 2,203
Nismo - thanks for the link!

And Thanks for the input guys... I may actually look into doing this. who knows. thanks for the advice though. I'm gonna go check out the alty forums now.
Old Jan 3, 2002 | 11:44 AM
  #9  
Mizeree_X's Avatar
Getting back to his roots
iTrader: (9)
 
Joined: Mar 2001
Posts: 3,549
I painted my rims white

I used the Dupli-Color white paint on my 92SE's rims. I sanded off the clearcoat (not perfectly), then proceeded to wash the rims. I then applied two coats of white primer (not sure of the brand, it was regular primer), and then applied 4 coats of the Dupli-Color and let it set for 24 hours. The rims came out wonderful -- the 4 coats were nice and thick and made the rims look like they were powdercoated (almost). For the $10 in paint it cost me, I was very impressed.
Old Jan 3, 2002 | 11:53 AM
  #10  
carnal_c30's Avatar
Former Sponsor
iTrader: (38)
 
Joined: Nov 2000
Posts: 7,799
From: Everywhere, CA
Originally posted by CKNY
Nismo - thanks for the link!

And Thanks for the input guys... I may actually look into doing this. who knows. thanks for the advice though. I'm gonna go check out the alty forums now.
I'll save you the trouble

How to Paint your rims Black,or any color
Materials Needed
4-6 cans of Rustolem Black Night Metallic Paint
1-2 cans of Rustolem White Primer
1 can of Rustolem or other brand clear coat
1 large roll of masking tape
1 8 sheet package of fine grit sandpaper
1 Jack and 2 Jackstands


1.Remove wheels from car it is easier to do 2 at a time so jackstands will be needed.
2.Wash them with some water and soap until all dirt is gone, then dry completely
3.Use a fine sandpaper and sand down all surfaces to be painted. You need to get rid of the clear coat. If silver they should become a powdery looking silver/whitish color.
4.Mask of the tire and all places that you do not want painted.
5.Use a White primer, it makes it easier to see where you have already painted. Apply 2-3 coats and let dry completely between coats.
6.Apply 4+ coats of paint making sure to use light layers at first and then build up to the full coats for an even finish for the last couple coats. Make sure to let them dry thourghly between coats.
7.After the paint is dry apply 2 coats of clear coat for extra protection.
8.Allow to dry for about 30-45 mins before re-applying to the car.
9.Repeat for the other three wheels.
9.You are all done, great job.
Old Jan 3, 2002 | 05:17 PM
  #11  
Lordrandall's Avatar
Senior Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 7,851
From: Burbank, CA
Spray two different colors in a checker pattern so they look CF....



Old Jan 3, 2002 | 07:21 PM
  #12  
NYCe MaXiMa's Avatar
...needs to please stop post whoring.
iTrader: (9)
 
Joined: Aug 2000
Posts: 9,284
Re: Ok, So, I want to spraypaint my rims ;)

Originally posted by CKNY
hehe... I just took my 18" chrome revo's off for the winter (******* snow) and put back my pos silver 15" enkei's. Seriously, I feel like a lesser man. The car looks like ***. It is faster however!

Anyway, the point of this post. Am I crazy for wanting to spraypaint my 15's rims black? I know if I really wanted it done right I should have them powdercoated but I don't feel like spending that money on winter rims. The rims are in some cruddy shape and I think I'd like to spray them with a dozen coats of gloss black just to do something a little different. Someone give me some opinions here? Would the paint hold up at all?

Am I nuts? Maybe it's time to go to sleep. =)






where can I see more/bigger pics of your car? I think it looks totally sweet...
Old Jan 3, 2002 | 11:53 PM
  #13  
CKNY's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 2,203
Re: Re: Ok, So, I want to spraypaint my rims ;)

Originally posted by NYCe MaXiMa








where can I see more/bigger pics of your car? I think it looks totally sweet...
Thanks dude... try http://www.ckny.50megs.com/images/
I don't know if the links work - last time I checked it gave me problems.... I need webspace. hehe.
Old Jan 4, 2002 | 12:04 AM
  #14  
NYCe MaXiMa's Avatar
...needs to please stop post whoring.
iTrader: (9)
 
Joined: Aug 2000
Posts: 9,284
Re: Re: Re: Ok, So, I want to spraypaint my rims ;)

Originally posted by CKNY


Thanks dude... try http://www.ckny.50megs.com/images/
I don't know if the links work - last time I checked it gave me problems.... I need webspace. hehe.

eh, nope, giving me problems too I'll check it later.

here are some free sites for images that allow external links too:

- maxima.cardomain.com
- www.clubphoto.com
- www.webshots.com
- www.onlineshowoff.com
- www.webphotos.com

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
coolsun
Wheels/Tires
6
Nov 13, 2016 05:01 PM
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM
Luigi623
7th Generation Maxima (2009-2015)
4
Sep 21, 2015 01:42 PM
mikeymouse1995
6th Generation Maxima (2004-2008)
2
Sep 18, 2015 06:42 AM
0m3nc0w
4th Generation Maxima (1995-1999)
3
Sep 11, 2015 05:21 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:43 PM.