Hey guys, I own a Forest Green 1996 Infiniti I30. Im new on the board, and really want to know, can the Stillen Aero Kit made for the 4th gen Maximas (95-99) fit on the 95-99 Infiniti I30's? Can it paste and screw on normally? Any help would be appreciated..

And its possible to clear my corner lights because there is a nasty orange lens in there? I heard there is a generic method of using a heat gun or blow dryer to melt the silicone around the lens, and SLOWLY move a flat screwdriver around the lens, and pry off the orange lens? Then re-seal with clear silicone? I hope this a correct method, and any suggestions would be greatly appreciated..

And one more question, springs made for 4th gen Maximas would fit on my I30, right? And if they do, any springs out there that offer a 1.8 to 2 inch drop? i wanna ride LOW with a nice kit and be a roller out there with the first modded I30 in my town on Toronto in Canada...

And im in the process of beginning to mod the basics (i/h/e)

Please reply and your expert help is greatly appreciated.. Thanks..

-Terry

 

the springs will definitely fit........but about the body kit......i am really not 100% sure.......but i am purdy sure that the sideskirts will fit, you may be able to fit the rest of it with a small amount of modification???

 

Hmm i see.. What sort of modification must i perform? Like actual body work with body filler? I wanna make it simple and make it a do-it yourselfer.. Any bending?

 

you will need two front lips to do a custom job for the kit. contact i30cefiro as he has done this mod

 

2 front lips?? wtf? thats weird..

 

that was discussed over 1 year ago.. someone has a new name

 

yeah, it's pain..
but it's do-able.

 

if you want the stillen kit for your I30 you will need to do a custom job. it wont fit as it is.

 

the front bumper on our cars is different from the maximas so you need two for i guess to customize it to fit our cars

 

Yea, I30Cefiro had to custom make it by buying to front lips for the maxima, and cutting them in half and molding the opposite ends together making a I30 front lip. I think that the side and rear would fit in since the car is the same length, and the back is just side pieces.

 

So you gotta mold some crap together? aww man.. Cutting them in half? In what way? like horizontally along the whole skirt? and mold the 2 top halfs or bottom halfs? sorry i am a n00b..

 

you guys can use Cefiro body kits though

 

yeah if we want to pay the shipping. but i'll keep that in mind next time i have 5k collecting dust

 

Just cut it in half(vertically), and do the same for the other make sure its cut evenly for both, and have a body shop mold them together and place it on the car. You may also try PM'ing I30Cefiro and ask him how its done.

 

 

close your mouth

 

you first

 

 

you expect me to just forget everything and put it in my mouth on the first date? sorry sir but I believe in 4play first

 

 

 

how's that for foreplay?

 

Check your mail

 

 

you know i like it rough big boy

 

 

unless it's a front and rear bumper replacement..

The US I30 has different front and rear bumper to Jspec Cefiro or Europe Maxima QX

SY~

 

http://www.paradox-systems.com/Products/product_52.html

 

way to go ptatoe!

that looks like a nice kit

 

I was reading through the FAQs, saw this thread and realized that Paradox sells a kit. So I thought I would add the link.

 

To a 3yr old thread?

 

just noticed that too

 

Sure, why not? The thread is in the FAQs.