Remember the Maxima Meet in Dallas in 2000? > pics
01-16-2002, 08:12 AM
#1
Remember the Maxima Meet in Dallas in 2000? > pics
Digging around last night and found these photos of the Dallas meet we had in December of 2000. It was like 25 degrees that day, sun was shining.
It was a good meet, lots of people. We have people from Houston, Austin, Dallas (of course), San Antonio, even a few from Oklahoma. I remember Warp Speed showing up to do some comparisons of the Y-pipes, and were out in the cold all day, and never got one on
(correct me if I'm wrong) Andi showed, and threw his car around a few times as well.
It was a good meet, lots of people. We have people from Houston, Austin, Dallas (of course), San Antonio, even a few from Oklahoma. I remember Warp Speed showing up to do some comparisons of the Y-pipes, and were out in the cold all day, and never got one on
(correct me if I'm wrong) Andi showed, and threw his car around a few times as well.
01-16-2002, 09:46 AM
#4
What new car? I still have the same ole car
No new updates, but the motor should be complete and ready to install in about 45 days or so (hopefully). I want to run some N/A dyno bases for a while to see where we made the power, and then we'll shoot for some BIG hp.
Talk about a BBBIIIGGGGGG Power adder:
No new updates, but the motor should be complete and ready to install in about 45 days or so (hopefully). I want to run some N/A dyno bases for a while to see where we made the power, and then we'll shoot for some BIG hp.
Talk about a BBBIIIGGGGGG Power adder:
01-16-2002, 09:49 AM
#5
What kind of HP is that thing kickin? 2000HP?
Things have been dead around here since the cold weather hit. Just looking for some new reports from one of the fastest Max's around.
01-16-2002, 09:57 AM
#6
Holeeee Bajeeezuz! 
Make that turbo any bigger and you'll have a Boeing 747 jet engine! Sheesh! What kind of hp are you lookin at? 1000 at the wheels?
Your seatblets must also have some kinda head strap, cause when that bad boy spools up, necks will surely snap!
DW
Make that turbo any bigger and you'll have a Boeing 747 jet engine! Sheesh! What kind of hp are you lookin at? 1000 at the wheels?Your seatblets must also have some kinda head strap, cause when that bad boy spools up, necks will surely snap!
DW
Originally posted by Don in Texas
What new car? I still have the same ole car . . . Talk about a BBBIIIGGGGGG Power adder:
What new car? I still have the same ole car . . . Talk about a BBBIIIGGGGGG Power adder:
01-16-2002, 10:11 AM
#7
Originally posted by dwapenyi
Holeeee Bajeeezuz! Make that turbo any bigger and you'll have a Boeing 747 jet engine! Sheesh! What kind of hp are you lookin at? 1000 at the wheels?
Your seatblets must also have some kinda head strap, cause when that bad boy spools up, necks will surely snap!
DW
Holeeee Bajeeezuz!
Make that turbo any bigger and you'll have a Boeing 747 jet engine! Sheesh! What kind of hp are you lookin at? 1000 at the wheels?Your seatblets must also have some kinda head strap, cause when that bad boy spools up, necks will surely snap!
DW
That's not Don's car.
01-16-2002, 12:17 PM
#11
heh...
yeah.. you and debby are getting dizzy... I think I was outside shivering with frostbite, but at least I wasnt 'sleepy'
I'll tell her she had a good 'hair shot'.. she'll be happy with that.
I'll tell her she had a good 'hair shot'.. she'll be happy with that.
01-16-2002, 12:21 PM
#12
hey deanne, don't gripe too much about freezing.. If I remember right, that's my jacket you're wearing in that pic..
And Don, I got my y pipe installed in about 20 minutes. only problem was the shop welded on a nut with the wrong thread for the O2 sensor, so I had to just screw it in as best I could for the dyno runs.
And Don, I got my y pipe installed in about 20 minutes. only problem was the shop welded on a nut with the wrong thread for the O2 sensor, so I had to just screw it in as best I could for the dyno runs.
01-16-2002, 12:21 PM
#13
favorite moment of the whole meet?
a week later Russ apologizes for not getting a chance to meet me... Ummm, we talked for 5 mins.. I stood there while you put on that RSB, but ahhhhh... ok, guess we'll meet next time
01-16-2002, 12:23 PM
#14
Senior Member
Join Date: Nov 2000
Posts: 1,026
Originally posted by Matt93SE
hey deanne, don't gripe too much about freezing.. If I remember right, that's my jacket you're wearing in that pic..
hey deanne, don't gripe too much about freezing.. If I remember right, that's my jacket you're wearing in that pic..
01-16-2002, 12:26 PM
#16
Senior Member
Join Date: Nov 2000
Posts: 1,026
Re: I take that back...
Originally posted by TimW
the favorite memory is that guy in the back (top) of pic #2 talking about coming out at finding his max stolen. I cant remember is name but I laughed til it hurt.
the favorite memory is that guy in the back (top) of pic #2 talking about coming out at finding his max stolen. I cant remember is name but I laughed til it hurt.
01-16-2002, 03:49 PM
#18
Guest
Posts: n/a
Re: favorite moment of the whole meet?
Originally posted by TimW
a week later Russ apologizes for not getting a chance to meet me... Ummm, we talked for 5 mins.. I stood there while you put on that RSB, but ahhhhh... ok, guess we'll meet next time
a week later Russ apologizes for not getting a chance to meet me... Ummm, we talked for 5 mins.. I stood there while you put on that RSB, but ahhhhh... ok, guess we'll meet next time
01-16-2002, 05:52 PM
#19
yeah...
like I said.. I may find myself at odds with you on alot things, but not alot of people would slide up under somebody elses car like that just to help them out. I mean, you werent dressed for it and it was COLD!
01-16-2002, 06:08 PM
#20
Guest
Posts: n/a
Re: yeah...
Originally posted by TimW
like I said.. I may find myself at odds with you on alot things, but not alot of people would slide up under somebody elses car like that just to help them out. I mean, you werent dressed for it and it was COLD!
like I said.. I may find myself at odds with you on alot things, but not alot of people would slide up under somebody elses car like that just to help them out. I mean, you werent dressed for it and it was COLD!
01-16-2002, 07:36 PM
#21
Yep, it was freezin A$$ outside.
I helped someone install a RSB, and "someone" thought his RSB was stolen......hehe
Russ helped everyone that wanted help. It took me about an hour to install that bra on my car, it was so cold, it wouldn't stretch.
I helped someone install a RSB, and "someone" thought his RSB was stolen......hehe
Russ helped everyone that wanted help. It took me about an hour to install that bra on my car, it was so cold, it wouldn't stretch.
01-16-2002, 07:46 PM
#22
Guest
Posts: n/a
Originally posted by Don in Texas
Yep, it was freezin A$$ outside.
I helped someone install a RSB, and "someone" thought his RSB was stolen......hehe
Russ helped everyone that wanted help. It took me about an hour to install that bra on my car, it was so cold, it wouldn't stretch.
Yep, it was freezin A$$ outside.
I helped someone install a RSB, and "someone" thought his RSB was stolen......hehe
Russ helped everyone that wanted help. It took me about an hour to install that bra on my car, it was so cold, it wouldn't stretch.
01-16-2002, 08:47 PM
#23
Senior Member
Join Date: Aug 2000
Posts: 666
Dallas meet
I remember the day, colder there than in Minnesota!!!. My hands are still cold. Damn. Made plenty of new friends that day. Too bad about that batch of pipes. Dallas and I learned a valuable lesson, double, triple check everything.We hope to make 3-4 of the major meets this year. We want to show every one the SFCs. We have several more Maxima projects on the drawing board, coming down the pipe.
Dan WSP
Dan WSP
01-16-2002, 09:14 PM
#24
Originally posted by RussMaxManiac
We both had that Bra problem...we needed to have a women do it for us.. lol!
We both had that Bra problem...we needed to have a women do it for us.. lol!
Yeah, we would have made a good team Russ, You've never removed a Bra, and I've never put one back on!!! lol
01-16-2002, 10:29 PM
#25
Originally posted by Don in Texas
Yeah, we would have made a good team Russ, You've never removed a Bra, and I've never put one back on!!! lol
Yeah, we would have made a good team Russ, You've never removed a Bra, and I've never put one back on!!! lol
...but that was f*cking funny.
01-16-2002, 10:48 PM
#26
Re: Dallas meet
Originally posted by Dan 93 SE
I remember the day, colder there than in Minnesota!!!. My hands are still cold. Damn. Made plenty of new friends that day. Too bad about that batch of pipes. Dallas and I learned a valuable lesson, double, triple check everything.We hope to make 3-4 of the major meets this year. We want to show every one the SFCs. We have several more Maxima projects on the drawing board, coming down the pipe.
Dan WSP
I remember the day, colder there than in Minnesota!!!. My hands are still cold. Damn. Made plenty of new friends that day. Too bad about that batch of pipes. Dallas and I learned a valuable lesson, double, triple check everything.We hope to make 3-4 of the major meets this year. We want to show every one the SFCs. We have several more Maxima projects on the drawing board, coming down the pipe.
Dan WSP
Dan, I'll be showing off the SFCs and B-pipe next weekend in Dallas for ya.
Don, I remember the bra episode.. you and russ finally put the thing in the sun at the Holiday Inn lot and let it warm up.. then it cooled off and shrunk again before you got it on his car.. Kaleb, Erick (the one with the Z) and I were laughing our a$$es off watching you guys!
btw, here's a few more misc pics of the weekend.. nothing too special.
http://www.ee.utulsa.edu/~mblehm/pic.../dallas_12_00/
01-16-2002, 11:18 PM
#27
Re: Re: Dallas meet
Don't show everyone everything bro! 
Originally posted by Matt93SE
Dan, I'll be showing off the SFCs and B-pipe next weekend in Dallas for ya.
Don, I remember the bra episode.. you and russ finally put the thing in the sun at the Holiday Inn lot and let it warm up.. then it cooled off and shrunk again before you got it on his car.. Kaleb, Erick (the one with the Z) and I were laughing our a$$es off watching you guys!
btw, here's a few more misc pics of the weekend.. nothing too special.
http://www.ee.utulsa.edu/~mblehm/pic.../dallas_12_00/
Dan, I'll be showing off the SFCs and B-pipe next weekend in Dallas for ya.
Don, I remember the bra episode.. you and russ finally put the thing in the sun at the Holiday Inn lot and let it warm up.. then it cooled off and shrunk again before you got it on his car.. Kaleb, Erick (the one with the Z) and I were laughing our a$$es off watching you guys!
btw, here's a few more misc pics of the weekend.. nothing too special.
http://www.ee.utulsa.edu/~mblehm/pic.../dallas_12_00/
01-16-2002, 11:20 PM
#28
Re: Re: Re: Dallas meet
Originally posted by Jeff92se
Don't show everyone everything bro!
Don't show everyone everything bro!
01-16-2002, 11:22 PM
#29
Re: Re: Re: Re: Dallas meet
Post on Mr. Ling's board about what you think so far. It will help me with the notes.
Originally posted by Matt93SE
hehehe All that's being dropped off on Monday before I go down. what's left, I won't take with me down there- as it's nothing I want to drive around with all day long. too risky.
hehehe All that's being dropped off on Monday before I go down. what's left, I won't take with me down there- as it's nothing I want to drive around with all day long. too risky.
01-17-2002, 01:47 PM
#31
Re: Re: Re: Re: Dallas meet
Originally posted by Matt93SE
hehehe All that's being dropped off on Monday before I go down. what's left, I won't take with me down there- as it's nothing I want to drive around with all day long. too risky
hehehe All that's being dropped off on Monday before I go down. what's left, I won't take with me down there- as it's nothing I want to drive around with all day long. too risky
01-17-2002, 09:13 PM
#33
Re: Re: Re: Re: Re: Dallas meet
Originally posted by NYCe MaXiMa
look at this nutcase...
[insert lame VG auto Maxima at top speed picture here]
look at this nutcase...
[insert lame VG auto Maxima at top speed picture here]
http://www.ee.utulsa.edu/~mblehm/pic...1/MOV00023.MPG
yeah, so?
Thread
Thread Starter
Forum
Replies
Last Post
Greenmaxspeed
4th Generation Classifieds (1995-1999)
6
08-31-2015 09:06 PM