FrankenCar intakes for 2k-2k1 ready to go
#1
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
FrankenCar intakes for 2k-2k1 ready to go
Ok we are ready to start shipping out intakes for 2000-2001 Maximas and I30's starting wednesday. We will have blue and silver ones and they use the same components and Genuine K/N filters as out 2002's that everyone loves. The price is 144.99 plus shipping of 10 dollars, the price difference is due to an extra hole and a couple welds, just enough tto cover costs. The installation is pretty much the same BUT ONE BIG DIFFERENCE. It's not hard to do and we will tell you up front, that in order to get the Air Temp sensor in the path of moving air where it should be you have to cut open a wire loom that run along side the battery, very easy to do and take the slack out of it so the sensor fits into the whole. it took me 5 minutes to think it up, do it and seal it back up, not a big deal at all. just letting everyone know. there is also a link for the address for money orders now on the site. any questions please don't hesisate to ask, steve@frankencar.com and i will get back to you asap, usually i'm on all night.
the paypal link is up on the site now also, please specify color when you order.
also to all those that emailed, i lost all my old emails. i got a new pc cus the old one and lost them. i apoligize.
the paypal link is up on the site now also, please specify color when you order.
also to all those that emailed, i lost all my old emails. i got a new pc cus the old one and lost them. i apoligize.
#2
Re: FrankenCar intakes for 2k-2k1 ready to go
Originally posted by dmbmaxima88
Ok we are ready to start shipping out intakes for 2000-2001 Maximas and I30's starting wednesday. We will have blue and silver ones and they use the same components and Genuine K/N filters as out 2002's that everyone loves. The price is 144.99 plus shipping of 10 dollars, the price difference is due to an extra hole and a couple welds, just enough tto cover costs. The installation is pretty much the same BUT ONE BIG DIFFERENCE. It's not hard to do and we will tell you up front, that in order to get the Air Temp sensor in the path of moving air where it should be you have to cut open a wire loom that run along side the battery, very easy to do and take the slack out of it so the sensor fits into the whole. it took me 5 minutes to think it up, do it and seal it back up, not a big deal at all. just letting everyone know. there is also a link for the address for money orders now on the site. any questions please don't hesisate to ask, steve@frankencar.com and i will get back to you asap, usually i'm on all night.
the paypal link is up on the site now also, please specify color when you order.
also to all those that emailed, i lost all my old emails. i got a new pc cus the old one and lost them. i apoligize.
Ok we are ready to start shipping out intakes for 2000-2001 Maximas and I30's starting wednesday. We will have blue and silver ones and they use the same components and Genuine K/N filters as out 2002's that everyone loves. The price is 144.99 plus shipping of 10 dollars, the price difference is due to an extra hole and a couple welds, just enough tto cover costs. The installation is pretty much the same BUT ONE BIG DIFFERENCE. It's not hard to do and we will tell you up front, that in order to get the Air Temp sensor in the path of moving air where it should be you have to cut open a wire loom that run along side the battery, very easy to do and take the slack out of it so the sensor fits into the whole. it took me 5 minutes to think it up, do it and seal it back up, not a big deal at all. just letting everyone know. there is also a link for the address for money orders now on the site. any questions please don't hesisate to ask, steve@frankencar.com and i will get back to you asap, usually i'm on all night.
the paypal link is up on the site now also, please specify color when you order.
also to all those that emailed, i lost all my old emails. i got a new pc cus the old one and lost them. i apoligize.
hey steve,checked out your site. no pay pal link on your site
#3
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Re: Re: FrankenCar intakes for 2k-2k1 ready to go
Originally posted by pcante1
hey steve,checked out your site. no pay pal link on your site
hey steve,checked out your site. no pay pal link on your site
http://www.frankencar.com/intakes.shtml#
#6
Re: Re: Re: FrankenCar intakes for 2k-2k1 ready to go
Originally posted by dmbmaxima88
it's there. i'm looking at it now. it's on this link
http://www.frankencar.com/intakes.shtml#
it's there. i'm looking at it now. it's on this link
http://www.frankencar.com/intakes.shtml#
ok thanks
#10
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Re: Re: Re: Re: Re: FrankenCar intakes for 2k-2k1 ready to go
Originally posted by pcante1
you said to specify color. how do you do that on pay pal? sorry i've never used pay pal before.
you said to specify color. how do you do that on pay pal? sorry i've never used pay pal before.
#12
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Originally posted by wope
are you gonna do a 4th gen one next?
are you gonna do a 4th gen one next?
#13
Originally posted by dmbmaxima88
i actually did the proto-type last night. sounds nice, damn 4th gen 5-spds are a lot different then my 2k2 6-spd. from now on anyone who tells me that they missed the 2-3 i'm jjust gonna say they are an idiot. SO MUCH EASIER then a 2k2 to do that shift.
i actually did the proto-type last night. sounds nice, damn 4th gen 5-spds are a lot different then my 2k2 6-spd. from now on anyone who tells me that they missed the 2-3 i'm jjust gonna say they are an idiot. SO MUCH EASIER then a 2k2 to do that shift.
#14
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Originally posted by deezo
You didn't test this on an 4th gen auto yet?
You didn't test this on an 4th gen auto yet?
-steve
#15
Originally posted by dmbmaxima88
i might slap one on lime's car friday if i go down to see her right now i have the rams but the adapters need to get machined. he had to ghetto rig the one i did last night. he's my friend though, he didn't car. we found out that the 2k2 adapter fits if you put it diagonally in 2 hole only
-steve
i might slap one on lime's car friday if i go down to see her right now i have the rams but the adapters need to get machined. he had to ghetto rig the one i did last night. he's my friend though, he didn't car. we found out that the 2k2 adapter fits if you put it diagonally in 2 hole only
-steve
#16
Re: Re: Re: Re: Re: Re: FrankenCar intakes for 2k-2k1 ready to go
Originally posted by dmbmaxima88
there should be a comment area when you order, and just type it right in there. BLUE or Silver, even throw in your year if hyou want to.
there should be a comment area when you order, and just type it right in there. BLUE or Silver, even throw in your year if hyou want to.
#18
Re: 4TH gen
Originally posted by 98sterlingmist
I can't wait for the 4th gen to come out. I want a new intake so bad. You have my business as soon as they are out.
I can't wait for the 4th gen to come out. I want a new intake so bad. You have my business as soon as they are out.
#19
Re: 4TH gen
Originally posted by 98sterlingmist
I can't wait for the 4th gen to come out. I want a new intake so bad. You have my business as soon as they are out.
I can't wait for the 4th gen to come out. I want a new intake so bad. You have my business as soon as they are out.
#21
I think it will be a while (march?)
I emailed steve a few weeks ago about the availabilty of the 4th. He said he was working on it and would be going through testing soon. He said March I think. I am willing to wait. I dont want to have to cut a hole in my Maxima for a CAI.
#25
Steve, how much for just the 2k-2k1 intake tube with instructions? Also I think it's been asked and the answer was affirmative, woul it work with an existing filter from a stillen or JWT pop intake? Would we need your bracket or the bracket provided with one of the aforementioned items? Keep me up to date and thanks for the good work.
#26
Do these filters comply with this?
http://knfilters.com/facts.htm#SELECT and click on filter selection.
http://knfilters.com/facts.htm#SELECT and click on filter selection.
#28
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
ok here we go
maxjp-yes they are, email me at steve@frankencar.com for more details.
nmexmax-yes they do, they are almost 2 inches longer then needed.
yoritomo-yes it will work with a stillen or JWT and you won't even need the bracket.
everyone with 4th gen- they will be out maybe by the end of this month. if not RIGHT in the beginning of march.
ok here's prices for just the piping.
2002-$60 shipped to the US
2000-2001 $65 shipped to US
email for canada shipping, about 10 bucks more.
maxjp-yes they are, email me at steve@frankencar.com for more details.
nmexmax-yes they do, they are almost 2 inches longer then needed.
yoritomo-yes it will work with a stillen or JWT and you won't even need the bracket.
everyone with 4th gen- they will be out maybe by the end of this month. if not RIGHT in the beginning of march.
ok here's prices for just the piping.
2002-$60 shipped to the US
2000-2001 $65 shipped to US
email for canada shipping, about 10 bucks more.
#29
Originally posted by dmbmaxima88
ok here we go
maxjp-yes they are, email me at steve@frankencar.com for more details.
nmexmax-yes they do, they are almost 2 inches longer then needed.
yoritomo-yes it will work with a stillen or JWT and you won't even need the bracket.
everyone with 4th gen- they will be out maybe by the end of this month. if not RIGHT in the beginning of march.
ok here's prices for just the piping.
2002-$60 shipped to the US
2000-2001 $65 shipped to US
email for canada shipping, about 10 bucks more.
ok here we go
maxjp-yes they are, email me at steve@frankencar.com for more details.
nmexmax-yes they do, they are almost 2 inches longer then needed.
yoritomo-yes it will work with a stillen or JWT and you won't even need the bracket.
everyone with 4th gen- they will be out maybe by the end of this month. if not RIGHT in the beginning of march.
ok here's prices for just the piping.
2002-$60 shipped to the US
2000-2001 $65 shipped to US
email for canada shipping, about 10 bucks more.
#30
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Originally posted by dm7297
how long till i get mine, i order like a week and 2 days ago youemailed me it was gonna be shipped out begining of last week just wonderin how much longer dyin to get it on thanks
how long till i get mine, i order like a week and 2 days ago youemailed me it was gonna be shipped out begining of last week just wonderin how much longer dyin to get it on thanks
-steve
#33
Maxima.org Sponsor and Donating Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Dec 2000
Posts: 6,690
Re: Re: Re: Just bought one!
Originally posted by Amazing2
USPS + Canada customs = Looooooooooooooong delays!
USPS + Canada customs = Looooooooooooooong delays!
#34
Re: Re: Re: Re: Just bought one!
Originally posted by dmbmaxima88
check your mail and i've shipped a couple to canada and it took week at most.
check your mail and i've shipped a couple to canada and it took week at most.
Check yours... I've replied 5 minutes ago!
EDIT: Never mind, I sent the email at the same time you posted yours.