SC Maxima + Test Pipe
#1
SC Maxima + Test Pipe
OMG insane!!
I didn't gain as much power as I did by simply adding the SC (obviously), but it feels like I gained more by adding this test pipe then I did when initially adding the y-pipe.
The best $40 mod (too bad it's illegal)
Response and power from 0-3000 RPM is SOOOOOOO much better, mid range is a lot better, and top end is a lot better. (Low end is like night and day).
Surprisingly the car is the same volume at idle, and possibly quieter when cruising. Also, when I do fast shifts from like 4000RPM and hit the throttle midlyl hard before it kinda bog'd a bit, now it just responds and zips on down the road.
It sounds a bit different at the higher end but not much. Just a tad bit more raspy, but not ricey or anything.
Before anyone asks, I don't know if I'm spitting flames, I'll get a friend to check for me tomorrow.
I didn't gain as much power as I did by simply adding the SC (obviously), but it feels like I gained more by adding this test pipe then I did when initially adding the y-pipe.
The best $40 mod (too bad it's illegal)
Response and power from 0-3000 RPM is SOOOOOOO much better, mid range is a lot better, and top end is a lot better. (Low end is like night and day).
Surprisingly the car is the same volume at idle, and possibly quieter when cruising. Also, when I do fast shifts from like 4000RPM and hit the throttle midlyl hard before it kinda bog'd a bit, now it just responds and zips on down the road.
It sounds a bit different at the higher end but not much. Just a tad bit more raspy, but not ricey or anything.
Before anyone asks, I don't know if I'm spitting flames, I'll get a friend to check for me tomorrow.
#2
PS - I replaced a Random Tech Cat with the Test Pipe, although I didn't feel crap for gains after installing the RT, but theoretically the gains SHOULD be better going from a stock cat, although I beg to differ. The difference between stock and RT is that the RT just makes your car sound smoother and quieter, no power gains.
#5
Originally posted by The New CLIMAX
Cool, where did you have it made?
Did you log into my account again?
Cool, where did you have it made?
Did you log into my account again?
Climax, actually as I said earlier I immediately pressed log off (which clears the cookies). For a moment I thought it would be cool to post the ATTN: The New CLIMAX post under your account, but I decided that it would be better if I didn't. It's not my account and I respect that.
Anyways, where at Dell did you work? This machine is OLD! Celeron POS Optiplex with integrated everything.
Anyways, about the pipe - you can get em on ebay or at www.testpipes.com
Get the 2.5"
#6
Originally posted by BrianV
Climax, actually as I said earlier I immediately pressed log off (which clears the cookies). For a moment I thought it would be cool to post the ATTN: The New CLIMAX post under your account, but I decided that it would be better if I didn't. It's not my account and I respect that.
Anyways, where at Dell did you work? This machine is OLD! Celeron POS Optiplex with integrated everything.
Anyways, about the pipe - you can get em on ebay or at www.testpipes.com
Get the 2.5"
Climax, actually as I said earlier I immediately pressed log off (which clears the cookies). For a moment I thought it would be cool to post the ATTN: The New CLIMAX post under your account, but I decided that it would be better if I didn't. It's not my account and I respect that.
Anyways, where at Dell did you work? This machine is OLD! Celeron POS Optiplex with integrated everything.
Anyways, about the pipe - you can get em on ebay or at www.testpipes.com
Get the 2.5"
I work at the Building Across the Hwy, near Fast Eddies.
#8
Thanks for the info about warpspeed.
Climax, I'm in building 5 (enterprise server), second floor in DWS Lab, and to my knowledge the computer has been there for quite a while.
the cookies are stored locally on the machines, not even two seperate machines going through the same proxy or with the same IP would stay logged in.
Climax, I'm in building 5 (enterprise server), second floor in DWS Lab, and to my knowledge the computer has been there for quite a while.
the cookies are stored locally on the machines, not even two seperate machines going through the same proxy or with the same IP would stay logged in.
#9
Moderator running more PSI than all the boosted Maximas... combined
iTrader: (5)
Joined: Aug 2000
Posts: 6,345
RT cat isn't really worth it if your state doesn't require annual inspection or emission. For ~$40, test pipe is the way to go for any maxima with major power adder. The test pipe I got is 2.5" stainless steel with aluminized flange.
This is interesting......
http://www.testpipes.com/media/4ebay.jpg
I would look into testpipes.com's cat. convertor material pressed in so it will not trigger the CEL.
This is interesting......
http://www.testpipes.com/media/4ebay.jpg
I would look into testpipes.com's cat. convertor material pressed in so it will not trigger the CEL.
#12
Originally posted by Cumalot
What's the difference between the test pipes from testpipes.com and warpspeed.com?
Btw, the RT cat is useless. I didn't feel any gains whatsoever.
What's the difference between the test pipes from testpipes.com and warpspeed.com?
Btw, the RT cat is useless. I didn't feel any gains whatsoever.
#14
Originally posted by 1MAX2NV
RT cat isn't really worth it if your state doesn't require annual inspection or emission. For ~$40, test pipe is the way to go for any maxima with major power adder. The test pipe I got is 2.5" stainless steel with aluminized flange.
This is interesting......
http://www.testpipes.com/media/4ebay.jpg
I would look into testpipes.com's cat. convertor material pressed in so it will not trigger the CEL.
RT cat isn't really worth it if your state doesn't require annual inspection or emission. For ~$40, test pipe is the way to go for any maxima with major power adder. The test pipe I got is 2.5" stainless steel with aluminized flange.
This is interesting......
http://www.testpipes.com/media/4ebay.jpg
I would look into testpipes.com's cat. convertor material pressed in so it will not trigger the CEL.
#16
Re: SC Maxima + Test Pipe
Originally posted by BrianV
OMG insane!!
I didn't gain as much power as I did by simply adding the SC (obviously), but it feels like I gained more by adding this test pipe then I did when initially adding the y-pipe.
The best $40 mod (too bad it's illegal)
Response and power from 0-3000 RPM is SOOOOOOO much better, mid range is a lot better, and top end is a lot better. (Low end is like night and day).
Surprisingly the car is the same volume at idle, and possibly quieter when cruising. Also, when I do fast shifts from like 4000RPM and hit the throttle midlyl hard before it kinda bog'd a bit, now it just responds and zips on down the road.
It sounds a bit different at the higher end but not much. Just a tad bit more raspy, but not ricey or anything.
Before anyone asks, I don't know if I'm spitting flames, I'll get a friend to check for me tomorrow.
OMG insane!!
I didn't gain as much power as I did by simply adding the SC (obviously), but it feels like I gained more by adding this test pipe then I did when initially adding the y-pipe.
The best $40 mod (too bad it's illegal)
Response and power from 0-3000 RPM is SOOOOOOO much better, mid range is a lot better, and top end is a lot better. (Low end is like night and day).
Surprisingly the car is the same volume at idle, and possibly quieter when cruising. Also, when I do fast shifts from like 4000RPM and hit the throttle midlyl hard before it kinda bog'd a bit, now it just responds and zips on down the road.
It sounds a bit different at the higher end but not much. Just a tad bit more raspy, but not ricey or anything.
Before anyone asks, I don't know if I'm spitting flames, I'll get a friend to check for me tomorrow.
#17
Re: Re: SC Maxima + Test Pipe
Reset your MIL'S??? Whats that? I'm in the process of chopping my cat off and after reading this, I'm starting to realize that theres 50 dam.n sensor's that run to it!!! What exactly am i goin to need to do, like what sensor's to worry about..
#18
Re: Re: Re: SC Maxima + Test Pipe
Originally posted by snootalope
Reset your MIL'S??? Whats that? I'm in the process of chopping my cat off and after reading this, I'm starting to realize that theres 50 dam.n sensor's that run to it!!! What exactly am i goin to need to do, like what sensor's to worry about..
Reset your MIL'S??? Whats that? I'm in the process of chopping my cat off and after reading this, I'm starting to realize that theres 50 dam.n sensor's that run to it!!! What exactly am i goin to need to do, like what sensor's to worry about..
I have no MIL's (but like Mardi Gras I'm boosted).
Yes the car smells worse (from outside the car). However, inside the car I can't smell a thing. If you're smelling fumes inside your car there's a good possibilitiy you have a leak near your test pipe (check the flanges and gaskets).
You should only smell it out of the back of the exhaust. Now let's hope a cop behind me doesn't smell it and pull me over and see I have no cat.
#19
Re: Re: Re: Re: SC Maxima + Test Pipe
Originally posted by BrianV
You should only smell it out of the back of the exhaust. Now let's hope a cop behind me doesn't smell it and pull me over and see I have no cat.
You should only smell it out of the back of the exhaust. Now let's hope a cop behind me doesn't smell it and pull me over and see I have no cat.
Of course I would only use this at the track not on the street so I could use a straight pipe.
#21
Re: Re: Re: SC Maxima + Test Pipe
Originally posted by snootalope
Reset your MIL'S??? Whats that? I'm in the process of chopping my cat off and after reading this, I'm starting to realize that theres 50 dam.n sensor's that run to it!!! What exactly am i goin to need to do, like what sensor's to worry about..
Reset your MIL'S??? Whats that? I'm in the process of chopping my cat off and after reading this, I'm starting to realize that theres 50 dam.n sensor's that run to it!!! What exactly am i goin to need to do, like what sensor's to worry about..
#24
yup.. for the cheaper modder:
how to make a cat into a 'test pipe' (but be able to pass visuals)
put your stock cat next to a concrete wall or step or something.
put a chisel in it
start pounding away at the chisel
dump the insides out
free 'test pipe' that passes visuals
blah blah you have been warned this is illegal blah blah blah so are mp3s blah blah blah my name is in winamp so eat me blah blah blah.
how to make a cat into a 'test pipe' (but be able to pass visuals)
put your stock cat next to a concrete wall or step or something.
put a chisel in it
start pounding away at the chisel
dump the insides out
free 'test pipe' that passes visuals
blah blah you have been warned this is illegal blah blah blah so are mp3s blah blah blah my name is in winamp so eat me blah blah blah.
#25
Originally posted by Lime
yeaaaaaaaahhhhhhhhh...I guess you've never been to a classic car show have you?
yeaaaaaaaahhhhhhhhh...I guess you've never been to a classic car show have you?
Nope, but I have almost bougth a 400 small block camaro with straight pipes. 450 hp, now that sucker polluted when it ran those 11's. Not to mention the noise.
#26
Originally posted by skeelo34
Nope, but I have almost bougth a 400 small block camaro with straight pipes. 450 hp, now that sucker polluted when it ran those 11's. Not to mention the noise.
Nope, but I have almost bougth a 400 small block camaro with straight pipes. 450 hp, now that sucker polluted when it ran those 11's. Not to mention the noise.
#28
Originally posted by BriGuyMax
I have a 97 maxima just like Brian does...and I've had my warpspeed test pipe on for 4 months....no CEL at all...EVER.
(I think my rear O2 sensor is retarded or something)
I have a 97 maxima just like Brian does...and I've had my warpspeed test pipe on for 4 months....no CEL at all...EVER.
(I think my rear O2 sensor is retarded or something)
#29
Originally posted by BrianV
I do believe (correct if I'm wrong) that BriGuy is just running NOS, he's not boosted, and obviously he only very sparingly uses the NOS, so whatever pipe / year he has is probably ok.
I do believe (correct if I'm wrong) that BriGuy is just running NOS, he's not boosted, and obviously he only very sparingly uses the NOS, so whatever pipe / year he has is probably ok.
#32
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally posted by BriGuyMax
It's a secret
It's a secret
#34
Originally posted by 97ABMAX
If you get the test pipe with the o2 hole then it shouldnt trigger the MIL light. It is $27.50 from Warpspeed. Also, it shoulnt make your car much louder at all. Take Care
If you get the test pipe with the o2 hole then it shouldnt trigger the MIL light. It is $27.50 from Warpspeed. Also, it shoulnt make your car much louder at all. Take Care
#35
Originally posted by JAY25
After reading all this info I needs a Test Pipe too . I'd like to use the setup lime has since I am now living in Atl. but on that same note I am kind of nervous since I have a greddy I dont know if it will get seriously loud. So I believe I saw a O2 sensor on my cat do I get the one with the hole or without the hole? This will make my CEL come on correct??
After reading all this info I needs a Test Pipe too . I'd like to use the setup lime has since I am now living in Atl. but on that same note I am kind of nervous since I have a greddy I dont know if it will get seriously loud. So I believe I saw a O2 sensor on my cat do I get the one with the hole or without the hole? This will make my CEL come on correct??
Jaime, I just ordered a test pipe from Warpspeed. I got the one with the O2 sensor hole. Total was $35 which included shipping, not bad if you ask me. You should consider that. I think you should get the one with the O2 sensor hole, so it won't trip the CEL.
#36
dynoed before and after test pipe all motor
cant remember my exact numbers but i know i gained hp with test pipe but i lost like 1lb tq. hp gain was like 3-4. my car spit flames which was very cool. one day me and about five or six maxes was headed to car show and the new body style mustang with chrome rims revs up on us and the driver and his psasenger was steady grinning. not wanting him to get away with it i rolled past him and counter-revved. swafford98 said my car spit out a 1-2ft flame. my g/f said it use to spit flames quite frequently when she was behind me. in any case i have an apexi dunk muffler which with the test pipe was too loud. i had to take the pipe out. couldnt take the backfiring and window shattering noise. plus i was a little sacred that if a cop looked under my car i would be stuck with a $1000.00 ticket.
im gonna hang on to it just in case i ever go boosted or nos.
im gonna hang on to it just in case i ever go boosted or nos.
#39
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally posted by Cumalot
Jaime, I just ordered a test pipe from Warpspeed. I got the one with the O2 sensor hole. Total was $35 which included shipping, not bad if you ask me. You should consider that. I think you should get the one with the O2 sensor hole, so it won't trip the CEL.
Jaime, I just ordered a test pipe from Warpspeed. I got the one with the O2 sensor hole. Total was $35 which included shipping, not bad if you ask me. You should consider that. I think you should get the one with the O2 sensor hole, so it won't trip the CEL.
#40
Originally posted by BrianV
Man I feel real good gains down low on my car.
Man I feel real good gains down low on my car.
-hype