dss42

iTrader: (1)

Here is a nice review by JAY25
http://forums.maxima.org/showthread....hlight=fidanza


If you need more information feel free to ask I have a Fidanza flywheel on my 98 Maxima.

Fidanza Aluminum flywheels Nissan 95-01 V6 MAXIMA DOHC Weight: 12 Code: NIS12
Part# 143991

Fidanza Aluminum flywheels Nissan 88-94 MAXIMA SOHC Weight: 11 Code: NIS17
Part# 143871

Fidanza Aluminum flywheels Nissan 92-94 MAXIMA DOHC Weight: 11 Code: NIS16
Part# 143921


We need 10 Buyers for this price. Everyone must pay before we place the order.

1. cardana24
2.
3.
4.
5.
6.
7.
8.
9.
10.

Call 516-504-4115 to place your order with a credit card We accept Visa/Master Card/American Express/Discover

Send Paypal payments to ultrarev@ultrarev.com

Price is $331 Shipped to 48 states.

Ones we have the 10 buyers we will place the order with Fidanza should take about 1-2 weeks all together.

NY Buyers I can order your flywheels to be shipped to us and you can pick it up.

Please PM ME your Address + Phone Number when you join.

cardana24

iTrader: (81)

I'm in if we can get this soon...but dont count me in if this is going to take months

dss42

iTrader: (1)

wont take months.

Ones we get 10 people they will start shipping out.

cmac95gxe

iTrader: (1)

I'm very interested.

dss42

iTrader: (1)

1. cardana24 (Please PM me Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3.
4.
5.
6.
7.
8.
9.
10.

Thanks!

frankieduxAE

iTrader: (3)

very interested.

a few questions.

will installing only the flywheel dramatically improve performance?

will I have to invest in a high performance clutch in the future?

for those who mechanically challenged (me), what's the price range for installation?

these are just some factors that will sway my decision to either buy or spend the 331.00 on something else, like a catback exhaust.

thanks.

dss42

iTrader: (1)

An Exhaust is a great mod aswell BUT don’t except any noticeable gains from it. I don’t know how it feels with a stock clutch should not be any different from an aftermarket clutch.

After my conversion from Automatic to 5 speed I put in an ACT Clutch few weeks after. I drove my friends car with a Fidanza flywheel and just loved it put mine in and I felt very good gains.

Car is more responsive I think this is one of the best mods after a Y-pipe.

Everyone who gets it never regrets it.

As far as price I am not sure.. I needed my tranny cleaned and differential bearing fixed cost me $500 for everything. It should be about the same amount as replacing a clutch $250-350

cardana24

iTrader: (81)

bump..........

cmac95gxe

iTrader: (1)

bump............

cardana24

iTrader: (81)

bummmmmmmmmmmmmmmppppppppppp

Blackwind

iTrader: (9)

ill be in after the first!!

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Need address - Part#143991 )
4.
5.
6.
7.
8.
9.
10.

Thanks!

billy_corgan

I would definetly be in but cant pay until i get my taxes back (3-4 weeks)

you could add my name to the list if it helps with the group deal. is it possible to get the flywheel later at this price?

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Need address - Part#143991 )
4. billy_corgan (Need address - Part#143991 )
5.
6.
7.
8.
9.
10.

Thanks!

Please pm me your address if you are in.

billy_corgan We need 10 people to make fidanza do a production run for us.

if you are in we can order a set and you can pay whenever you have the money your flywheel will be saved.

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Need address - Part#143991 )
4. billy_corgan (Have Address - Part#143991 )
5.
6.
7.
8.
9.
10.

Thanks!

Please dont forget I need a phone number.

dss42

iTrader: (1)

bump.................

Blackwind

iTrader: (9)

just replied to pm. sending a new one with phone number.

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Have Address - Part#143991 )
4. billy_corgan (Have Address - Part#143991 )
5.
6.
7.
8.
9.
10.

Thanks!

Please dont forget I need a phone number.

dss42

iTrader: (1)

lets bump this

BigDogJonx

iTrader: (7)

dont mean to burst your GD, but you can buy these for $329 shipped right now, dont need a GD and months to wait.

Dixit

Blackwind

iTrader: (9)

info please

XoPtOn

iTrader: (2)

flywheels only for manuals or autos also? it wont mess your engine up or something? Can a mechanic install it?

BigDogJonx

iTrader: (7)

Flywheels are not on automatics. Only manuals. There is a thin Flywheel that attaches to the torque convertor. That is already no more than 1lb.

Dixit

jcy98maxse

iTrader: (8)

Where @? Don't just give partial info if you're gonna say you can buy it for cheaper. Who or what company is selling it for $329 shipped?

cardana24

iTrader: (81)

dss42,
Are you going to lower your price? Because I looked into what BigDog was saying and it is true...you can get the flywheel for $329shipped.

BigDogJonx

iTrader: (7)

Slow your roll homie. I didnt give the company out cause I didnt want to kill the GD. I guess F'it, www.importhorizon.com

billy_corgan

yes dss42, I saw the price too. You think prices can get lower? if so then id still be in.

Blackwind

iTrader: (9)

12lbs? is that right?

Maxtank

iTrader: (8)

I just tryed ordering from them (import Horizon) and got my MO back today, with a leter that says Fidanzas are on a 3 week+ backorder.

I'm in if we can get them, I need one ASAP!

cardana24

iTrader: (81)

yeah I checked availibility before I ordered and they told me the same thing...dss42, when/if we get 10 people on this group deal do you have a source for the flywheels that is not back ordered?...I have been looking around and it seems like everyone is backordered....can you please let us know. Thanks.
Carson

dss42

iTrader: (1)

I have 1 in stock here but cannot offer the groupbuy price on it if you want it we can ship it out today for you.

http://www.ultrarev.com/ecart/shopexd.asp?id=18633

$330.28 + shipping.

If we get 10 buyers we can get 10 flywheels in a matter of a week or 2.

Price Break Down:

If we get 10 buyers price is $331 Shipped to 48 states.
If we get 20 buyers price will go down to $308.25 shipped to 48 states.

Sounds Good?

This is the lowest I can offer them but only way is with 20 buyers.

Jason R

iTrader: (39)

I hope no one else already ordered that one because I just ordered one myself.

spindation

Count me in, I've looked around and everyone is backordered.

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Have Address - Part#143991 )
4. billy_corgan (Have Address - Part#143991 )
5. spindation (Have Address - Part#143991 )
6.
7.
8.
9.
10.

Thanks!

I have a shipment of 20 coming in 2-2.5 weeks.

So if you need a flywheel its only $331 Shipped to 48 states.

killamaxima

could you count me in for 98max thanks

killamaxima

hey never mind went to a local shop and got it for the same price.sorry

Jason R

iTrader: (39)

count me in.

dss42

iTrader: (1)

1. cardana24 (Have Address - Part# 143991 )
2. cmac95gxe (Have Address - Part#143991 )
3. 98maxblackwind (Have Address - Part#143991 )
4. billy_corgan (Have Address - Part#143991 )
5. spindation (Have Address - Part#143991 )
6. UNCDooD (Need Address - Part#143991 )
7.
8.
9.
10.

Thanks!

I have a shipment of 20 coming in 2-2.5 weeks.

So if you need a flywheel its only $331 Shipped to 48 states.

billy_corgan

So do we still need 10 people for this price, or will that price be available for everyone?

dss42

iTrader: (1)

10 people.