ok without your email address i have no idea who's paying. can you tell me what's your email address? just list the sets your looking to get with the color leather and stitching.

thanks!

GD is officially over.

if you still would like to buy a set of boots go to www.redlinegoods.com
Dan

 

Dan did you get my payment from hoss422000@yahoo.com ?

 

payment was sent for
96 max
shift boot: black w/tan stitching
e-brake: black w/tan stitching

if you need my address again PM me

 

Oh,sorry.My email address's < pquachtx@hotmail.com >,and I'm getting for 2 car,a 96 and 03.

I want 1 set for the 96
Ebrake and shifter boots,
Leather =Black
Stitching =Tan

I want an E-brake boot for the 03.
Leather =Black
Stitching =Light Grey/Titanium stitching.

And thanx for the GD DanNY.

 

I paid on Friday, how long do you think it'll take to get here?

 

Dan, please update. Thank you.

 

I guess im too late to get it this? How much were the full sets (arm rest, 5 speed boot, ebrake boot)?

 

update please!!!!!

 

Did anybody get their boots yet?

 

dood.. after the payments go in they have to make the boots.. at least wait two weeks before expecting it.. its custom made.. its not like they have them instock on a shelf

 

bump, update please

 

I just want to make sure my payment has put me on the list....

 

following members have not paid:
looslip
MaXaZoR
Johnny01001
email has been sent out to you...if you paid then please email me your paypal confirmation ASAP.

everyone else who paid...thank you.
according to the vendor the boots has been sent. you should start to see them sometime next week if not towards the end of this week.

if you can, please post that you have gotten your boots. the items are coming from poland via USPS..so watch for that card in your mailbox. sometimes they forget to leave the card in your mailbox so if you haven't seen your boot(s) 2 weeks from today (4/28) check w/ your local post office and if you still don't see it PM me.

let me know if you have any questions. feel free to PM me.
Thanks!
Dan

 

I have paid. I just sent you my paypal confirmation via email. Please let me know if you find my records or not.

 

sweet, I cant wait
thanks Dan

 

Dan,
I got your email I am still in Im not sure how you want payment through paypal...I can send u my CC# so just email me all the info on how to pay and we'll work this out...Thanks

 

Location:Connecticut
Date: 04/30/04
Time: 8:41 AM
Status: Recieved
Impression: Look and smell great

 

loopslip sorry for the mixup.
Thanks!
Dan

 

i've emailed you twice already. you didn't even email me back with any response. now you come here and post that you don't know how to make a paypal payment. The payment info is a few posts above and I even sent you the paypal info via email.

you can send me anything you want but you and Johnny01001 are both out of the GD. if you still would like the boots feel free to order from www.redlinegoods.com direct but I can't sit here and play games with people who are not serious in a GD.

Thanks!
Dan

 

good to hear. others should be getting their boots shortly.
Dan

 

I cannot BELIEVE I missed this...I've been checking the GD forum regularly but this thread was never near the top....

DanNY, any chance of a repeat GD in the next month?

 

Wait, did this GD even get over 40 people? If not, then there was no discount for the shifter/e-brake/armrest combo ($90)...

And a question: will the shift boot acommodate a shorter shifter without being all bunched up?

 

To late to order?

 

Received mine on friday. They look good. Going to install today.

 

to answer a few questions...

- yes the GD is over. you're more than welcome to order direct from www.redlinegoods.com

- the GD never made it past 30...but i accomidated the people who were in it. so the price dropped down to $55 for the set even though it never got to that price level.

- the items are shipped from poland (hence the delay in ship time). on the package it's listed as "synthetic leather"...if the packages were marked with real leather it might add on customs fees or it might not get past customs.

- no 2 hides will look alike. leather is a natural material and just like your fingerprint no 2 hides will look exactly alike. remember to use some leather conditioner and the leather will work in a little with some use and light.

- if you have a shorter shifter it won't bunch up like u think it would...unless it's shorten by a huge amount. the leather will "dip" down more. but it won't look like a bunched up sock or anything.

if there are any more questions feel free to PM me and i'll get back to u ASAP.
Thanks!
Dan

 

Recieved mine on Sat,thanx Dan.

 

DanNY - I just got mine (Looks nice BTW), but have a question. The larger of the two (EBrake boot?) has no holes in it to allow it to be attached. How do I attach it to the interior piece?

 

DanNY - I just tried to install the shift boot since the holes are cut etc, but the holes don't line up with the trim piece. I've tried rotating the boot to make sure it wasn't me starting in the wrong place, but it doesn't look like they could possibly be aligned to match the holes. I'd shoot some extra holes, but I'd really rather not be looking at extra holes in the thing.

Help.

 

i'm going to check w/ polo and see what he says. he did the test fitting and said it was a good fit.

from that i saw in his car...the holes clip on to the panel.

check this pic...
http://shadysport.homestead.com/file...s/5genboot.jpg

try to see if the stitching lines up the same way you see in the pic. that might guide you on the positioning of the boot. the overlap/velcro part is on the pass side.

 

I aligned it like in the pic, and more of the holes line up, but about 1/4 of them don't. I partly fits, but it's real tight in some places where the holes are too close, and loose in other where the holes are too far away. The end result that there are gaps and such and other places where it's obviously very tight.

Also, what about the total lack of holes in the EBrake boot? Should we cut those ourselves?

Ideas on the shift boot?

 

I need the Ebrake boot, but I have 2k1 auto, will the 5 speed Ebrake boot will fit ? Will the E-boot fit aftermarket Ebrake handle, If so I'll go ahead and buy one right away.

Thanks for helping

AA

 

If you like, I can take measurements around the boot of how far apart the holes are, and then also measure how far apart all the posts on the trim ring are to show that they don't match up.

 

Just received mine on Monday. Looks great, just gotta get them on now.

Thanks Dan!

Vic

UPDATE: Just installed, seem to fit pretty good right now. No problems with them. Much better now.

 

To people who ordered the 4th-gen armrest cover: does it fit over the existing cover or in place of it? Is the fit perfect or not-so perfect? Thanks.

 

Guys,

the holes are always hidden. Please feel free to punch them in the right places if they're a bit off. It will not adversely affect the durability of the product. Just please use a sharp tool, like an ice-pick or a small screwdriver, to make the holes. A small piece of wood underneath the boot would do nice to make sure the leather is not stretched while the hole is being punched.

As for the 5th gen ebrake boot, as you do know it's a totally custom design. There are no pre-made mounting holes or prongs or anything on your car. We don't punch the holes in them, because depending on if you want a more "baggy" or a more stretched look, you can punch them closer or further from the bottom edge.

As with anything custom made, it's a bit more hassle to get it to work, but so much more fun to have something that not many others have. Wouldn't you say?

Maciek

 

Hi,

we've been offering the 4th gen armrest for about a year now. Never had any complaints.

Maciek

 

The 5th gen ebrake boot is the same for all year models from 2000 up!

Thanks,
Maciek

 

Got mine Yesterday, i just slid over the old one for now till i get the time to install, looks 100% better then last one, Thx!

 

Everyone,

for all of you who missed the GD, here's a discount code, valid for 5 days from today, exclusively to Maxima.org. It will give you a 10% discount. Just punch it in while ordering (there's a field for that on our order form, if you can see well enough to read what I'm writing here, you can't possibly miss it LOL).

2P8NF403L0S

Regards,
Maciek

 

It fits over it but you have to unscrew the plastic piece underneath and then tuck it under all snug like. I used some industrial strength glue to keep it tight then screwed the plastic piece back on. Adds a little more padding that way.