NP mingo. Thanks for keeping the deal going. I don't mind updating the thread, you're doing enough just by keeping it alive.

BTW have you thought about swapping in an 01 ECU, it should work fine.

 

I would love to get in on this, but no one knows for sure if this scan tool will work with a '95
I read everwhere that the '95's use OBDII, but a non-compliant connector.
Does anyone know this for sure?

 

*doublepost*

 

hrmmm... maybe. i'm currently in the process of doing a manual swap so i will be needing an ECU but then i seem to have no luck with 2k1, i can barely find manual 2k's as is. but that is definately a good idea though, i'll look further into that then.

 

I checked www.car-part.com and found 8 listed for the 2001 M/T w/17" wheels. Average price is $150.00

 

Getting it reprogrammed and installed should be another $80-125 or so.

Anyone know of any other good OBD-II scanners and software that would work with a 2k Max?

 

that sounds great, thanks for the help. i guess i'll get an ecu from them then. but i might still be running on my a/t ecu for now til' i get a lil more money. i'm not sure yet.

 

Come on all we need is one more. Take a look at their web site if you have any questions.

I can't believe people aren't jumping on this.

I won't be able to update this if we get any more takers till Friday night.

 

Bump, come now one more for this deal ill settle for the 5 people deal. This thing is nice and will make you you a better person all around lol

 

I just sent an email. If this will work on my car, I'll be in. I'll let you all know when I get the email back.

 

Well it was worth a try. Maybe we can give it another go in a month or two, I'll be in on it if I haven't paid full price for it by then.

Thanks for setting this up mingo. I didn't know about this tool, good find.

 

is this officially cancelled?

 

Don't know. I guess if we have 5 people it'd still be on. Mingo has info and contact. We need to verify the head count to continue.

 

I'm in. I've been looking to get one of these programs anyways. Just PM or email me with the necessary info.

Matt

 

It's been a while since we've heard from the preople that were in. So this is a roll call, who's in?

 

If it's still on, I'm in.

 

Originally Posted by mingo
here is the product
http://www.autoenginuity.com/products.html

it regularly goes for $229

with 5 or more people we get it for 169
with 10 or more we get it for 159

the group deal will end 3 days after all 5 slots are filled. i hope we reach 10 by then.
1. maximaman777=in
2. Larrio=in
3. big_dawg=in
4. maxhead=in
5. MaxInProgress=?
6. desertmaxima=?
7. Linkage23=?
8
9
10

Here is where we are now. 4 confirmed. 3 still in question. If 1 more confirms we're good to go at $169, if all 3 confirm then we're short 3 for $159...

 

i'm good for this

 

Please refer to post #57 for current updates.
Thks.

 

eh guys this is a good product, only reason why i'm not gonna be part of this deal anymore is because i have a 2000 maxima and the new ecu i got for the manual swap is also off of a 2000.

 

Alright...Adam and the rest of you, you can count me in for the Palm based model. I have a Dell Axim Pocket PC, but I am not entirely impressed with it, so I'll get a Palm unit instead...

In other words, count me in!

 

nope cant do it anymore, if it waited like 2 weeks id be good again, had some issues come up that needed to be taken care of, if i get the money before the gd closes for good ill let you guys know sorry but this i feel really bad now cause ive never backed out of GD before

 

Originally Posted by mingo
here is the product
http://www.autoenginuity.com/products.html

it regularly goes for $229

with 5 or more people we get it for 169
with 10 or more we get it for 159

the group deal will end 3 days after all 5 slots are filled. i hope we reach 10 by then.
1. maximaman777=in
2. Larrio=in
3. big_dawg=in
4. maxhead=in
5. Quicksilver=in
6. MaxInProgress=?
7. desertmaxima=?
8. Linkage23=?
9
10

Here is where we are now. 5 confirmed. 3 still in question. We're good to go at $169, if all 3 confirm then we're short 2 for $159...

 

The timer is up on editing post 57.

We're set at 5. I don't know when the 3 day timer starts or if it has already, so anyone else that wants in better make up their mind quickly!

Mingo should I contact Auto Enginuity and get the payment info together or are you still willing to handle that end of it?

 

Does anybody know how this program works? For example, many programs can be installed on more than one computer (so you could all go in on one copy and send it around). Just a thought.

 

That's called theft

Now, do you want in, or are you just out to rip people/companies off?

 

woo hoo, we got five.... lets do this

 

Im tempted, im new to this so Im not sure hwo I would really beenfit from this...is this program way better than just pulling codes for teh ecu? My car is running like crap, and all I get is the KS code, but its not my KS, will this tool tell me every single thing that is bad in my car? SOrry if the questions are stupid, just wanted to know for myself.

 

oh yeah, while reading the website on the info of the product, it says 1996 and new newer passenger vehicles, whether it be domestic, Asian, or European... does this mean that my 1995 is not compatible?

 

1996 is the year that the EPA required all makes to be OBDII compliant. I don't know if the 95 MAx was OBDII or OBDI. If you email tem using te link in post 27 you'll get an answer fairly quick.

 

I've sent an email requesting payment info and any thing else needed to complete the process.

 

you can already read engine codes from your ecu, not like the 5th gens with OBD-II

 

FOR IMMEDIATE RELEASE

Press Contact:
Jay Horak
AutoEnginuity, L.L.C.
480-326-3257
jayhorak@autoenginuity.com


AUTOENGINUITY ANNOUNCES SCANTOOL VERSION 2.2


MESA, Ariz. – May 13th, 2004 – AutoEnginuity, a leading OBD-II diagnostic scan tool provider, announces the release of ScanTool version 2.2.

Version 2.2 now introduces full Mode 6 support and integrates the GM and Ford enhanced interfaces. These optional expansions are now only an activation code away from being available to the diagnosing consumer.

With all of the power in the latest version, AutoEnginuity also offers a new found freedom with Bluetooth wireless solutions. The Bluetooth solutions remove the serial cable leash. Now the diagnosing consumer can operate around the vehicle instead of being tethered to it—without sacrificing data throughput rates.

Version 2.2 is available on the PC, Windows Mobile (formerly Pocket PC), and Palm platforms. AutoEnginuity’s OBD-II connector offers all four electrical interfaces (CAN support optional) in a single compact connector. ScanTool supports all five OBD-II protocols (PWM, VPW, ISO, KWP2000, and CAN).


Hi Adam. Was checking my email and thought I might answer this.

Unfortunate that Nissan didn't do well with their MY 2000 vehicles. Anyway,
we'll honor a group buy for full retails at 169.95 at five purchasers. Some
good news for those on the fence. We are in the running for Motors 20 Top
Tools of the Year. We recently were reviewed in Pen Computing and used in
the 101 BMW 3-series Projects book. (All this in the last two months.)

-----Original Message-----
From: Adam Nitschke [mailto:anit77@charter.net]
Sent: Thursday, May 27, 2004 11:06 PM
To: jayhorak@autoenginuity.com
Subject: Group buy setup on Maxima.org

Hello Jay,

My name is Adam, you responded to an email I sent you with a question about
you scanner.
Unfortunately the person that set up this group buy (screen name "mingo")
has a 2000 Maxima and isn't able to use your poduct. We now have 5 confimed
people ready to buy with a few more unconfimed. It doesn't look to likely
that we'll each 10 and at this time I'm taking over as the contact person.

Could you foward me the info needed to complete the purchase as the people
that are in are ready to buy.


Thanks,
Adam


I emailed him again about how we're to pay.
Payment info to follow...

 

so you're saying I dont need the tool then?

 

How do I know if my vehicle is OBDII compliant?

If your passenger vehicle was manufactured for sale in the U.S., with the model year of 1996 and newer (and rarely some 1995 vehicles), you have the OBDII interface. You can check in the engine copartment for an emissions sticker that will verify your vehicle's compliance.

 

is it too late to get in on this deal?

 

Not at all.


I'm also going to ask him if they plan on expanding their extended options beyond domestic makes. I'm also going to get the CAN option so I can read 350z/G35's.

 

To order group buys we would prefer each person did call individually with a
two-day window of opportunity. They must use the code "Maxima.org" and we'll
take it from there. Please, please, remind them that at the close of the 2nd
business day it is done. Far too many people straggle in days later and we
won't do it.

-----Original Message-----
From: anit77@charter.net [mailto:anit77@charter.net]
Sent: Friday, May 28, 2004 7:06 AM
To: jayhorak@autoenginuity.com
Subject: Re: RE: Group buy setup on Maxima.org

Hi Jay,

How would you like us to order? Should each person order off your web site,
and if so do we need to reference anything during the ordering process?

Thanks for the info I'll post it for others to see.

Regards,
Adam


So there you go. The clock is ticking. As long as 5 of us place an order by 5pm pst on Wednesday 6/2/04 the price is $169.95 If you're not on the list above then post here before buying so we can get a soild head count. I plan to place my order on Tuesday 6/1/04 unless we're 1 short of 10, then I'll wait till the 2nd. If we get 10 buy then I'll email Jay again and let him know. The price will then drop $10.

 

Hey Adam, I am sorry to inform you I am unable to participate in this GD. I recently got in a car accident and am now unabelto purchase this OBDII scanner tool. I hope to remedy this soon and soon purchase this tool. Thanks and again I apologize for the inconvience.

 

No problem. Glad you're all right. We've got 5 would have been nice to shoot fo 10 but hey we still have some time.