GD: $90 Shipped Motostorm UDP Pulley Paypal Preferred
#162
Originally Posted by Mr.Duck
jesus people learn to read, add if you want in! im not in though... heard of too many problems with UDP's
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
you guys have 5 now so only 5 more to go! good luck with this!
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
you guys have 5 now so only 5 more to go! good luck with this!
#165
put me down for one for my 2k2. do not send $ yet. they do not have the parts yet. most places can't sell something they do not have. this causes a bit of confusion, and makes it more difficult to control on the other end. plus, we don't need anyone paying and not getting the part or ending up with a delay on shipping and then ppl get upset. i need to make appropriate arrangements so that they can determine who is part of the gd. should have instructions in a day or so. everyone just sit tight and keep the list going...thanks for starting one.
#168
To my knowledge I think that these are only for 95 - 2003 maxima, but they might have them for 3rd gen too. Just go to motostorm.com and email them to find out.
This was one of the original posts about fitment:
This pulley fits 1995-2003 Nissan Maxima/2002-2004 Altima(3.5L)/1996-2002 Infiniti I30/I35
This was one of the original posts about fitment:
This pulley fits 1995-2003 Nissan Maxima/2002-2004 Altima(3.5L)/1996-2002 Infiniti I30/I35
#169
i'm in for sure,
so this is the newest list:
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6.mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
hey, ryan, just reveived your mevi yesterday. thanx for the fast shipment and everything. it'll go on the car after i get it ported out!!!
so this is the newest list:
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6.mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
hey, ryan, just reveived your mevi yesterday. thanx for the fast shipment and everything. it'll go on the car after i get it ported out!!!
#172
aight, just got my brother to come in the deal. he is in.
so now we got 10, this is the new list:
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1996
let's run this deal!!!
so now we got 10, this is the new list:
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1996
let's run this deal!!!
#174
I can pay by next friday, unless it'll take a month or so I can wait then. I just bought my 18' ICW Black Wheels
#175
sorry scorpy
then we've got 11, why not, the more the better
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
aight, i need some help with this too. i have no idea who to pay to and when do we start payin, because i really think i wanna wait till motorstorm gets them made and ready to ship before i have to pay for it.
then we've got 11, why not, the more the better
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
aight, i need some help with this too. i have no idea who to pay to and when do we start payin, because i really think i wanna wait till motorstorm gets them made and ready to ship before i have to pay for it.
#176
Originally Posted by cyu1
aight, i need some help with this too. i have no idea who to pay to and when do we start payin, because i really think i wanna wait till motorstorm gets them made and ready to ship before i have to pay for it.
#177
yeah I'm not buying until they have all of them made, I just dont want to deal with worrying about the pulley and the money.
#179
sure why the hell not,
I am in
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
I am in
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
#183
Originally Posted by IWNTMORHP!!
Hello. Looks like you caught us at a bad time. We had so many pulleys in stock but we are currently down to 3. But the good news is that we are currently building some more and expect them to be done in about 30 days if you guys can wait. Group price will be about $80 per pulley shipped if you can get 10 individuals together. Just let me know, you guys have 30 days to decide. Thanks
Brett Sandstrom
Motostorm Inc
www.motostorm.com
Brett Sandstrom
Motostorm Inc
www.motostorm.com
#184
Originally Posted by Dubbya
Just a couple general ? here. What belt(s) will we need? Also isnt there a gasket or something that is recommended to be replaced at the same time?
Alternator and A/C- Gates K060408 or K060410
Power steering- Gates K040300 (300 represents 300mm)
Not sure about if you would need to replace the oil ring seal. You might if you have a lot of miles.
#185
Here is another post about the belts:
It was discovered that the serpentine belt (K060408) used for the VQ30 install fit the VQ35 fine, but the power steering belt was a little bit too small, so we replaced it with a Gates K040300.
It was discovered that the serpentine belt (K060408) used for the VQ30 install fit the VQ35 fine, but the power steering belt was a little bit too small, so we replaced it with a Gates K040300.
#187
I have never heard anything really go wrong with Motostorm or Unorthodox Racing pulleys(not unless some can prove me wrong). I am sure there are some horror stories out there just like anything you can buy to mod you car.
I have seen people claim freeing up to 4-6 whp with these and quicker revs. They really benefit people with modded car that have full exhaust systems, air intakes, and more.
I would just search for threads about upds and make a decision if you want it or not since there are mixed feelings on whether these things do anything.
I have seen people claim freeing up to 4-6 whp with these and quicker revs. They really benefit people with modded car that have full exhaust systems, air intakes, and more.
I would just search for threads about upds and make a decision if you want it or not since there are mixed feelings on whether these things do anything.
#188
Originally Posted by makavelisk
BELT SIZES: (ask for local parts store to cross reference with these gates #’s)
Alternator and A/C- Gates K060408 or K060410
Power steering- Gates K040300 (300 represents 300mm)
Not sure about if you would need to replace the gasket. You might if you have a lot of miles.
Alternator and A/C- Gates K060408 or K060410
Power steering- Gates K040300 (300 represents 300mm)
Not sure about if you would need to replace the gasket. You might if you have a lot of miles.
Which gasket?... Head gasket?
I have 170k miles.
#192
Originally Posted by illmortal
The oil ring seal?.. is that usually an expensive part? or just a simple plastic piece?
#193
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
#194
Originally Posted by maxspeed96CT
can i still get on this, i can pay pal right now.
-Sean
#195
got it, please add me to the list,
i posted back when this deal just ended, i just missed it and i hope we can get it again for even cheaper
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
13.maxspeed96ct 1999
i posted back when this deal just ended, i just missed it and i hope we can get it again for even cheaper
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
13.maxspeed96ct 1999
#197
Ok it looks like the 4th gens have a metal ring(I had to change this out on my dads pathfinder a while back and it was rubber.) If you go to this website and scroll to the bottom there are pictures of what you need to replace and the metal ring.
http://www.greghome.com/Greg's%20Garage/1999%20Nissan%20Maxima%20SE/Underdrive%20pulley.htm
I would just do some more research on it and maybe go to a nissan dealer to have them look the part up since they have the manuals on their cpu that show all the parts.
http://www.greghome.com/Greg's%20Garage/1999%20Nissan%20Maxima%20SE/Underdrive%20pulley.htm
I would just do some more research on it and maybe go to a nissan dealer to have them look the part up since they have the manuals on their cpu that show all the parts.
#199
sweet, good idea, I'll just replace it anyways but tommorow morning ill give the dealership a call for a price.
#200
i want in too
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
13.maxspeed96ct 1999
14.maximariceboi 1999
1. Makavelisk 2003
2. joosdawg 1999
3. joosdawg 1995
4. Dubbya 1996
5. illmortal 1997
6. mad-max98 1998
7. upstatemax 2001
8. IWNTMORHP!! 2002
9. cyu1 1995
10.asianmusketeer 1995
11.scopium 2001
12.96GreenMax 1996
13.maxspeed96ct 1999
14.maximariceboi 1999