Berk Technology Intakes - Part IV
Originally Posted by ecko51
My Max is a 2kSE.
And yes I did. I was having serious cold start and hesitation problems B4 the install that to dealers could not indentify for about a month. I never got a SES light and I believe that Nissan techs could not notice if you drove your car in with only 3 wheels on it if the ECU did not tell them.
When I installed the BERK I had all the blown MAF symptoms.
So I put on the stock intake and drove to my local Nissan. I picked up a new MAF and put it in. Cold start and hesitation was gone. Than I put the BERK back on w/ the new MAF and my car feels new again. The performance isn't earth shattering but it is noticable and it sounds great.
And yes I did. I was having serious cold start and hesitation problems B4 the install that to dealers could not indentify for about a month. I never got a SES light and I believe that Nissan techs could not notice if you drove your car in with only 3 wheels on it if the ECU did not tell them.
When I installed the BERK I had all the blown MAF symptoms.
So I put on the stock intake and drove to my local Nissan. I picked up a new MAF and put it in. Cold start and hesitation was gone. Than I put the BERK back on w/ the new MAF and my car feels new again. The performance isn't earth shattering but it is noticable and it sounds great.
Do you think I should replace the MAF when I install the Berk Intake? I ordered an extra MAF just in case something like this would happen. I still have the extended warranty, but the deductible is $100..not worth taking it in..just order a new MAF. Thanks for responding!
Andy
I wouldn't replace it till I had to. When you get the MAF it has a nice little note telling you to have your ECU software updated. It seems like most of the guys on here don't do it.
If you have an intake on I don't think you will get warranty coverage but if you have the stock on than you could get a MAF and reprogram done with the deductible .MAYBE.
If you have an intake on I don't think you will get warranty coverage but if you have the stock on than you could get a MAF and reprogram done with the deductible .MAYBE.
Donating Maxima.org Member
Joined: Sep 2004
Posts: 247
I hope that i dont come across as a noob with this post. but im looking for a intake kit for an 89 max. i know that warpspeed has some but ive been hearing some bad remarks about that. Is there anyone out there who might know where i can get one or does berk has any to offer. thanks.
Originally Posted by aziphrale
I hope that i dont come across as a noob with this post. but im looking for a intake kit for an 89 max. i know that warpspeed has some but ive been hearing some bad remarks about that. Is there anyone out there who might know where i can get one or does berk has any to offer. thanks.
Senior Member
Joined: May 2003
Posts: 1,087
I've been trying to decide on an intake for a while. I think this deal just made up my mind. I'll be taking one for an 04, paying most likely by credit card. If you don't mind, just pm me with all the information i'll need to pay for it and so on. Thanks.
Member
Joined: Apr 2004
Posts: 96
Originally Posted by cobymoby
20040-up Full intake systems with APEXi filters
$175.95
Shipping on any of the above systems is $1.00 to the 48 states. During this promotion only.
$175.95
Shipping on any of the above systems is $1.00 to the 48 states. During this promotion only.
Originally Posted by Anuj
so no k&n midpipe?
even if it's not a part of the special deal?
even if it's not a part of the special deal?
Shoot me an email at bryan@berktechnology.com with what you currently have on your car now and I'll let you know what products we have available for your specific setup.
Regards,
Bryan
Member
Joined: Jul 2004
Posts: 48
Berk Intake
Few questions - This is my first engine mod of my car and determing if i should go with a Cold AIr intake or Regualr Air intake...
Is the Berk intake Cold Air or just an air intake?
I would be interested in the Intake and the K&N filter
Let me know what to do since i feel like im a noob at this...
-MiKe
Is the Berk intake Cold Air or just an air intake?
I would be interested in the Intake and the K&N filter
Let me know what to do since i feel like im a noob at this...
-MiKe
Originally Posted by TitanMax03
Few questions - This is my first engine mod of my car and determing if i should go with a Cold AIr intake or Regualr Air intake...
Is the Berk intake Cold Air or just an air intake?
I would be interested in the Intake and the K&N filter
Let me know what to do since i feel like im a noob at this...
-MiKe
Is the Berk intake Cold Air or just an air intake?
I would be interested in the Intake and the K&N filter
Let me know what to do since i feel like im a noob at this...
-MiKe
Regards,
Bryan
949-679-8618
Originally Posted by akaxmrxhammer
cobymoby
i know i've asked you before but how much is the mid-pipe? does it come with the 2 couplers and 4 clamps? i live in OC and was wondering if i could go there and pick it up.
i know i've asked you before but how much is the mid-pipe? does it come with the 2 couplers and 4 clamps? i live in OC and was wondering if i could go there and pick it up.
If you are in OC you'll have to pick one up at Wicked Street Garage in Garden Grove.
11711 Westminster Ave, Ste 3A
Garden Grove, CA 92843
714 - 590 - 9289
If you prefer I can still ship it under this promo for $1.
Regards,
Bryan
Originally Posted by Mexica Max
What will be the price on this after september?
2004-up Full intake systems with K&N filter
$129.95
2004-up Full intake systems with K&N filter
$129.95
Regards
Bryan
Originally Posted by kcowden
And the promo ends when??? Bryan, I sent you an e-mail via your web site and haven't heard anything yet. Thanks in advance.
To answer the question on this post, the promo will most likely last past Sept. There is definately a price increase coming in Jan 2005.
Supporting Maxima.org Member
Joined: Nov 2003
Posts: 688
Originally Posted by cobymoby
The midpipe upgrade kit is $59.95, and yes it comes with all of the neccesary silicone couplers and full stainless hose clamps. I'm assuming that this is for a Stillen upgarde that you have now.
If you are in OC you'll have to pick one up at Wicked Street Garage in Garden Grove.
11711 Westminster Ave, Ste 3A
Garden Grove, CA 92843
714 - 590 - 9289
If you prefer I can still ship it under this promo for $1.
Regards,
Bryan
If you are in OC you'll have to pick one up at Wicked Street Garage in Garden Grove.
11711 Westminster Ave, Ste 3A
Garden Grove, CA 92843
714 - 590 - 9289
If you prefer I can still ship it under this promo for $1.
Regards,
Bryan
Originally Posted by akaxmrxhammer
would it be the same price as your offer if i pick it up from wicked street garage?
I am completely sold out of the 2004 Maxima intakes. I have another batch on order with the fabricators. Will not have them for another 2-3 weeks.
Supporting Maxima.org Member
Joined: Nov 2003
Posts: 688
Originally Posted by cobymoby
It would be the the same. They may or may not charge you sales tax.
I am completely sold out of the 2004 Maxima intakes. I have another batch on order with the fabricators. Will not have them for another 2-3 weeks.
I am completely sold out of the 2004 Maxima intakes. I have another batch on order with the fabricators. Will not have them for another 2-3 weeks.
thanx for the fast response. i would be picking up the mid-pipe from wicked garage. thanx again cobymoby.
Originally Posted by akaxmrxhammer
thanx for the fast response. i would be picking up the mid-pipe from wicked garage. thanx again cobymoby.
Regards,
Bryan
Supporting Maxima.org Member
Joined: Nov 2003
Posts: 688
Originally Posted by cobymoby
I do have those in stock. Let me know what color combination you want for the couplers and I'll make sure that they have it there waiting for you.
Regards,
Bryan
Regards,
Bryan
i will be picking it up on either friday or saturday. 2004 maxima mid-pipe with black couplers would do. thanx cobymoby
My car is otherwise stock.
Hey Coby, I am very interested, just have been a bit hesitant with modding my new Max after the bath I took on my Tahoe. I think I could swing the K&N full kit for my '01 considering I was going to spend 40 on the drop-in anyway. Please let me know if you have any other information that might be useful. Thanks!
Originally Posted by S00NR1
Hey Coby, I am very interested, just have been a bit hesitant with modding my new Max after the bath I took on my Tahoe. I think I could swing the K&N full kit for my '01 considering I was going to spend 40 on the drop-in anyway. Please let me know if you have any other information that might be useful. Thanks!
Or, if you have paypal just send it over to "paypal@berktechnology.com" with a note and I'll process it.
The 00-01's are in stock and ready to go in every color. Just make sure to specify your silicone coupler choice, red, blue, or black.
Regards,
Bryan
bryan@berktechnology.com
949-679-8618
Originally Posted by akaxmrxhammer
i will be picking it up on either friday or saturday. 2004 maxima mid-pipe with black couplers would do. thanx cobymoby
Bryan,
When putting this together, from the throttle body..does it go like this?
I'm sorta confused on the couplers. The first one on the left is the one that is 3"x3" but skinnky to fat. Then the midpipe, 3"x3" coupler (fit on the MAF is tight as hell, any suggestions?), MAF, MAF adapter, 2"x2" coupler, adapter for filter, gasket, then filter.
Andy
p.s. sorry for the big pic
When putting this together, from the throttle body..does it go like this?
I'm sorta confused on the couplers. The first one on the left is the one that is 3"x3" but skinnky to fat. Then the midpipe, 3"x3" coupler (fit on the MAF is tight as hell, any suggestions?), MAF, MAF adapter, 2"x2" coupler, adapter for filter, gasket, then filter.
Andy
p.s. sorry for the big pic
