so you soldered them directly onto the plug without a harness? thanks for your response, i want to get this working since i have wires under my hood that are open and i have no corner light.

the city light is the light next to the headlight... the really small bulbed one. from one of the pictures above... it included a harness...

since my front corner light is out, the back one is blinking twice as fast! LOL!

 

well, yeah something like that, i used these wire connectors that u slide onto the prongs and use pliers to squeeze them on there tightly, then i just used a little elctrical tape to secure and cover....i couldnt wait either....


i did something stupid after i did this install, i accidentally grounded out my tail lights...i took el tape off of some wire cuz the tape looked like it was falling off, i did it to both wires and i swear i dropped a wire and it landed right on the other and it just blew my tails, i said to myself, "God didnt want me to F*&K wit my car today" wut are the odds it lands right on the other wire....

ill post a HELP thread for this one, i dont wanna pay these guys another $180 to fix my problem....this happened to me a long time ago....my tail lights come on with my alarm though, explain that to me someone...i have no interior lights, i only have em when i auto start the car....

 

i didnt get a harness for my city lights, how did u wire that one up?

or maybe i did get the harness, lol, i dont know wut i got there, it has a white connector, where did ppl wire this? maybe ill fit my strobes in there...or ill keep in the corner lights? ahhhh, ill figure it out..

 

ok, i think i know what you're talking about now. i saw some of these at autozone last night... do you remember which one you bought? there were a bunch of them at autozone with different amperages, i believe.

i take it that you didn't take the negative off your battery when you did the install, huh? thanks for your help man...

 

i didn't either. i'm referring to one of the pictures that someone posted above that showed a harness and wires sticking out. he got in on the GD from the maxmojo.

either way, i need both the city light harness and corner light harness, but if your way works, i might just do that before rain comes to my area (thursday).

edit: OH DAMN. it was you that posted that picture and sorry, upon close inspection, yeah, you didn't get harnesses either. i noticed that you're in brooklyn, me too, would you mind if i check out your setup or something? we can take this to PM.

 

i got the H4 harness, thats about it....ppl just took their old socket for the corner lights and made notches so it fit in the cefiro corner light area....yeah PM....or i prefer IMz though, its better....

 

got my lights in the mail today... it came with a broken piece =(

 

My lights came with a broken piece also!! But all in all the lights look sexy as hell.

 

I'm sorry the lights were damaged. I encourage you to file a claim with UPS. I did pay for the insurance on each headlight. Unless of course it was something you had to cut off anyway.

 

for the city lights.. i cut off the paradox end and used the old harness from the (old) corner lights. AND....ALWAYS DISCONNECT THE NEGATIVE BATTERY WIRE BEFORE ****IN WITH YOUR CAR!

 

lol yeah, but of course if u connected something wrong then hook ure battery back up, as soon as the battery gets connected ure gonna blow something anyway...anyway i have no tail lamps from installing something else in my car....

 

Got mine Friday,thanx MaxMoJo.
Any one install them on yet?Can you post up close pics off of the gap?Thanx!

 

I was wondering if the deal was still going on?, do this housing take H4 bulbs? also if you had pics of the gap because I am either going to by these if the gap is not that big or black housing / euro clear Headlights + Corner - JDM style.

 

This deal is still going on, black housing is running out but still have some left. Plenty of clear ones left. Yes, they do use H4 bulbs.
If you read through the whole thread, I believe someone posted pics of the gap. Some people choose to use black weatherstripping to fill in that gap.

 

payment sent via pay pal for smoked. thanks for the great deal guys.

 

Interested in this deal how much longer is this going on? Do you have any black smoked ones left? Also can I get the h4 wiring instructions?

 

is the deal still going on ???? i just finished painting my car and putting on the skyline body kit yesterday and nowi need new headlights because mine were broke form a fender bender i had.. this is the cheapest i have ever seen these lights,,, usually they go for like $350

http://illmob.org/images/maxima/Maxima-bodykit.jpg
is how my car looks now... i gotta update my sig

 

maxmojo, can you extend this until friday?

please!!!

 

Do the corner lights not fit properly? And what is this city light thing?'

And in the install, what is this galvanized plumbers tape for?

 

corners were designed for the jdm cefiro also the usa i30 so there will be a slight gap and that where the tape comes in to fill that gap up to make it look flush.

 

as for the galvanized plumbers tape....although the screws/nuts on the grille-side of the headlight keep the headlight really secure, there is no place to secure the side of the headlight where the corner light area is....honestly, u dont need the plumbers tape at all, those screws/nuts in the center are tight as hell, but i just used zip tie instead of plumbers tape....it really makes no difference, cuz like i said, the screws on the grille side of the headlight are really tight....

as for the gap....u just put the headlight in, cut whatever is in the way, and ure done, before i put it in for good....i bought some weather stripping from autozone, the thicker one....and it has adhesive backing. all i did was stick on the side of the corner lamp so there would be no gap....voila, ure done....

WHAT KILLS ME IS, TOMORROW OR THE DAY AFTER SOMEONE IS GONNA POST IN THIS SAME THREAD AND ASK "HEY IM INTERESTED, BUT WHATS WITH THE GAP??"

oh and the city lights, they just look cool, stick a 194 bulb in there and splice it to ure corner lights....its like having a 3rd and 4th corner light, but in the headlight housing....

 

Hey, thanks.....
I knew there was a gap, I guess i phrased that wrong. I was talking about the actually light bulb that goes in the "corner light" piece. I didnt know if that harness worked in that slot.

 

the old socket u have to make fit in the cefiros, but u can just cut the wires off the old one and connect em to the new socket....i forget the orientation of the wires.....

oh and someone PM wit h4 harness instructions, i forgot how to do this....thanks...or post in here....many asked, i dont remember someon giving a clear answer

 

GD is over for SMOKED CEFIRO's. They are out of stock.
We are re-stocking and will consider another GD on them with such great response to this one.

CLEAR CEFIRO deal is still ongoing until further notice.

 

hey i just paid for my headlights whas the deal with shiipping
thanx alot for the gd and the great price

 

maxmojo, is there a carbon fiber eyelid for the cefiros?

does anyone know where i can get a cf eyelid that would go nicely over the cefiros...

 

99I30lmtd, your headlights were already dropped off at the UPS store. I will send you your tracking number.

There is no CF eyelid to my knowledge, the eyelids that I have on my site are the only Cefiro eyelids available to my knowledge.


I'd like to thank everyone who participated in this GD and helped make it such a success. This has been one of the smoothest Group Deals I've had.

Thank you.

 

Ill take a pair of clear headlights.

 

send payment via paypal to sales@paradox-systems.com and they'll be on their way tomorrow.

 

yup ill take some credit for that, lololol

 

can anyone PM me a pic of a 95/96 with cefiro lights? Thanks.

 

is this group dealk still available? my headlight is cracked and im thinkin of jumpin in on this deal.

b4 i jump in i would like the info on the installation for the light assembly and the harness.

EDIT: sorry should have read a cuple more posts. i see that the smoked lights are out of stock so i am out also.

 

WIRING HARNESS FOR H4 PLEASE SOMEONE SIMPLY TELL ME WHERE THE 3 WIRES GO OR PM ME WIT INSTRUCTIONS PLEASE...how do i splice the 3 wires, which wires to splice into.....

 

can someone post pics of the lights already installed?

 

how do u wire the H4 harness, someone hook me up here...

 

This should be an easy guide to follow

 

I can't get my grill on, can someone help me??

 

i want in on this gd. Is it still going on?

 

This deal is no longer going on but on any further purchases of the headlights, (while supplies last) I will include the free gift and H4 harnesses.

 

just zip tie it to the holes in the radiator support....