NEW 105 degree rear trunk Hole camera GD $60 Shipped
1. ManualMaxima(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar
7. TKarrH
8. TKarrH
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.djfrestyle(Paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. EZEMaxima
19. EZEMaxima
20. ck69(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar
7. TKarrH
8. TKarrH
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.djfrestyle(Paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. EZEMaxima
19. EZEMaxima
20. ck69(Paid)
Senior Member
Joined: Mar 2004
Posts: 427
If the "RED" RCA cable is for power, what if we don't have an RCA connection for it and need to connect it to a direct power source? (ie. cig lighter)
I have an Alpine IVA-D300, does anybody know if it has a RCA connection for power?
I have an Alpine IVA-D300, does anybody know if it has a RCA connection for power?
Originally Posted by LatinMax
OK they make 12 volt VCR that you can set to record, then it will not record unless if there is a video sorce. (the cam for sale, for example) You wire the power on the camera to a relay that is powered to a micriwave sensor for an alarm system (car).
Then when someone sets off the microwave sensor (kind of like the old school talking alarms
) the sensor will turn on the relay to the camera power. Now there is a video sorce and the vcr records. There is a very small current draw and the car still starts in the morning. That is how I have done it for a few people.
wariow: can you make it so when you go in reverse the camera goes on?
Yes you can relay it into the backup lights on your car so that when you backup the camera turns on. Most TV will switch when they since a sorce to that sorce...if you have a cheaper TV that does not do that or has 1 video sorce there is a way to do it with a video switch.
Then when someone sets off the microwave sensor (kind of like the old school talking alarms
) the sensor will turn on the relay to the camera power. Now there is a video sorce and the vcr records. There is a very small current draw and the car still starts in the morning. That is how I have done it for a few people.wariow: can you make it so when you go in reverse the camera goes on?
Yes you can relay it into the backup lights on your car so that when you backup the camera turns on. Most TV will switch when they since a sorce to that sorce...if you have a cheaper TV that does not do that or has 1 video sorce there is a way to do it with a video switch.
I'm definately going to be doing this. Once, I get my Yellow Top, Camera and Alarm all I'll need is that $150 VCR and a Power Inverter and I'll throw it in my trunk somewhere for the time being. Is it possible to hook up the relay to the microwave sensor in the alarm, as well as the Back Up Lights? 
Originally Posted by _ck69_
If the "RED" RCA cable is for power, what if we don't have an RCA connection for it and need to connect it to a direct power source? (ie. cig lighter)
I have an Alpine IVA-D300, does anybody know if it has a RCA connection for power?
I have an Alpine IVA-D300, does anybody know if it has a RCA connection for power?
Originally Posted by Max Mutes
I'm definately going to be doing this. Once, I get my Yellow Top, Camera and Alarm all I'll need is that $150 VCR and a Power Inverter and I'll throw it in my trunk somewhere for the time being. Is it possible to hook up the relay to the microwave sensor in the alarm, as well as the Back Up Lights? 
)
1. ManualMaxima(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.djfrestyle(Paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. EZEMaxima
19. EZEMaxima
20. ck69(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.djfrestyle(Paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. EZEMaxima
19. EZEMaxima
20. ck69(Paid)
Originally Posted by LatinMax
Yes you can but you will have to use a relay. Also I can get the VCR that has the converter builtin. Let me know & I will check prices for you. (hey maybe another group deal lol )
)Yessss, 2 more people and we're set!
Senior Member
Joined: Sep 2000
Posts: 1,429
Originally Posted by ManualMaxima
hey eze maxima when are you going to be paying? you want 2 correct. please pay as fast as you can so we do not have to wait anymore!!!
I want in and i want two (2) of them cameras. How much for both cameras shipped to Lahaina, Hawaii 96761?
Thanks Eric
Originally Posted by EZEMaxima
I was waiting for your response to my question....
I want in and i want two (2) of them cameras. How much for both cameras shipped to Lahaina, Hawaii 96761?
Thanks Eric
I want in and i want two (2) of them cameras. How much for both cameras shipped to Lahaina, Hawaii 96761?
Thanks Eric
Originally Posted by ManualMaxima
we have iron whihc has mailed his and on his way
and eze maxima which has not paid yet and has untill friday.....if not you can get on the list.
and eze maxima which has not paid yet and has untill friday.....if not you can get on the list.
this shyt is killing me, i got this cam by myself, not off this GD, came wit yellow female rca, and the red is a male, but it isnt rca....its smaller than an rca....it doesnt fit regular sized rcas, i plugged yellow into a male-male adapter, plugged that into my HU, and the red i gave power and i get black screen with white lines....anyone have n e ideas?
thanks latinmax u said it all, i tihnk u solved all my problems......
i have to cut that connector and expose those two wires..... positive and ground....
thats all i needed to know since i ordered this thing, lol......thanks man....
AS FAR AS GETTING IT TO COME ON WHEN U REVERSE....WIRE THE CAMERAS POWER TO THE REVERSE LIGHT, I THINK ITS FUSE NUMBER 13....
i have to cut that connector and expose those two wires..... positive and ground....
thats all i needed to know since i ordered this thing, lol......thanks man....
AS FAR AS GETTING IT TO COME ON WHEN U REVERSE....WIRE THE CAMERAS POWER TO THE REVERSE LIGHT, I THINK ITS FUSE NUMBER 13....
nevermind, latinmax, i did wut u said didnt work, cut off the connector, there were two wires, one of them covered in red, the other exposed....i extended both wires so i had some slack to work with, i powered red, grounded other.....video plugged into the camera jack of my HU....still black with white lines.....then i reversed em, powered black grounded red, nothing at all....then i plugged the cameras video cable into a different monitor and same results....im beat....is it a defective camera? maybe i screwed it up when i just gave the red connector power? possibly fried it?
Originally Posted by TJ_Max
thanks latinmax u said it all, i tihnk u solved all my problems......
i have to cut that connector and expose those two wires..... positive and ground....
thats all i needed to know since i ordered this thing, lol......thanks man....
AS FAR AS GETTING IT TO COME ON WHEN U REVERSE....WIRE THE CAMERAS POWER TO THE REVERSE LIGHT, I THINK ITS FUSE NUMBER 13....
i have to cut that connector and expose those two wires..... positive and ground....
thats all i needed to know since i ordered this thing, lol......thanks man....
AS FAR AS GETTING IT TO COME ON WHEN U REVERSE....WIRE THE CAMERAS POWER TO THE REVERSE LIGHT, I THINK ITS FUSE NUMBER 13....
Originally Posted by TJ_Max
nevermind, latinmax, i did wut u said didnt work, cut off the connector, there were two wires, one of them covered in red, the other exposed....i extended both wires so i had some slack to work with, i powered red, grounded other.....video plugged into the camera jack of my HU....still black with white lines.....then i reversed em, powered black grounded red, nothing at all....then i plugged the cameras video cable into a different monitor and same results....im beat....is it a defective camera? maybe i screwed it up when i just gave the red connector power? possibly fried it?
Originally Posted by TJ_Max
nevermind, latinmax, i did wut u said didnt work, cut off the connector, there were two wires, one of them covered in red, the other exposed....i extended both wires so i had some slack to work with, i powered red, grounded other.....video plugged into the camera jack of my HU....still black with white lines.....then i reversed em, powered black grounded red, nothing at all....then i plugged the cameras video cable into a different monitor and same results....im beat....is it a defective camera? maybe i screwed it up when i just gave the red connector power? possibly fried it?
Originally Posted by quasidynamic
sounds like you were a little careless with the power connection... You may have shorted it originally, which could have caused damage to the camera. Then when you reversed the polarity (connected 12v to the ground and ground to the 12v) you may have damaged the camera. What 12v source are you using? did you meter that source too see if it's actualy 12v +- 20% ?
Originally Posted by TJ_Max
i wired it to the 15A trunk release....so for my next camera, i have to just hook up ground first.....then red wire...and dont initially "experiment" by feeding power to the red mini rca plug.....i think this is something that should be made known to people buying this...i was misinformed 3 times and it costed me 70 bucks....
Also, you arent concerned with current here, as these are very low current devices, you are concerned with voltage, so meter that voltage source and make sure its good. It probably is, its just an extra precaution.
Just some info that I found, on this camera to help carify:
Note: We design the camera to adapt to constantly changing voltage levels (within normal range +/- 10%) produced by vehicles' battery and alternator. However, during start up, some vehicles have very high momentary voltage which may cause overload and damage to the camera. To avoid such situation, we advice you to seek professional vehicle audio/video equipment installers.
Note: We design the camera to adapt to constantly changing voltage levels (within normal range +/- 10%) produced by vehicles' battery and alternator. However, during start up, some vehicles have very high momentary voltage which may cause overload and damage to the camera. To avoid such situation, we advice you to seek professional vehicle audio/video equipment installers.
well as far as my problem goes, im going to have to buy another it looks like, the people who sell are www.kawamall.com and the guy that ive been going back and forth through emails doesnt really sound like he understands what hes talking about, he just says make sure the polarity is correct...my advice is as soon as u get the cam, snip the red connector, expose pos and neg, ground neg, give pos power....and plug in yellow to ure video....should be done...
1. ManualMaxima(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar(Paid)
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.greenmax95se
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. --------------
19. --------------
20. ck69(Paid) thank you for your quick payment
well we now have 2 more spots. i am getting pissed at these non-payers. DO NOT ENTER THIS DEAL IF YOU ARE GOING TO BACK OUT AND NOT SAY ANYTHING TO ME.
now we gotta wait for 2 more poeple. Once we get 2 more payments, the cams will be ordered.
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar(Paid)
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.greenmax95se
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. --------------
19. --------------
20. ck69(Paid) thank you for your quick payment
well we now have 2 more spots. i am getting pissed at these non-payers. DO NOT ENTER THIS DEAL IF YOU ARE GOING TO BACK OUT AND NOT SAY ANYTHING TO ME.
now we gotta wait for 2 more poeple. Once we get 2 more payments, the cams will be ordered.
1. ManualMaxima(Paid)
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar(Paid)
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.Djfrestyl(paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. --------------
19. --------------
20. ck69(Paid) thank you for your quick payment
Djfrestyl sorry again, i have you down as paid, and i copied an old list. But ig ot you down.
2. glass88jaw (paid)
3. LatinMax (paid)
4. ZeroCool19(Paid)
5. Speedmax99(Paid)
6. iron scimitar(Paid)
7. TKarrH(Paid)
8. TKarrH(Paid)
9. Max Mutes (Paid)
10. slimer(Paid)
11.Maxima99SEbose(paid)
12.Djfrestyl(paid)
13. mdemonte(Paid)
14. Maxtank (paid)
15. Linkage23 (paid)
16. quasidynamic(Paid)
18. --------------
19. --------------
20. ck69(Paid) thank you for your quick payment
Djfrestyl sorry again, i have you down as paid, and i copied an old list. But ig ot you down.
well i ordered mine and had install problems, guys read wut was posted about install, dont make same mistakes i did.....i would jump in on this GD, but i get paid next week and i'll probably order 2nd day delivery again 
Yo ManualMaxima, can you give us all a write-up for this to install in the key hole in the trunk?! I don't wanna have problems with what wire goes where and so on....if not can someone who has done this give us all a write up?! Thanks in advance!
Senior Member
Joined: Sep 2000
Posts: 1,429
Originally Posted by ManualMaxima
as stated everywhere it is $60 shipped. Just please hurry up and send the money. Do you know how you are paying?
well we now have 2 more spots. i am getting pissed at these non-payers. DO NOT ENTER THIS DEAL IF YOU ARE GOING TO BACK OUT AND NOT SAY ANYTHING TO ME.
well we now have 2 more spots. i am getting pissed at these non-payers. DO NOT ENTER THIS DEAL IF YOU ARE GOING TO BACK OUT AND NOT SAY ANYTHING TO ME.
The reason why i never said anything that i was backing out is because the way you responded to my first question. I was merely trying to clarify how much would the 2 cameras cost shipped to me since shipping to Hawaii is ALWAYS MORE!!!!!! And you go on and mock me by saying "Do you know how you are paying?" If you wanna keep on doing business treat your customers with respect!!!!!!!
Eric