GD:13ich Cobra rotor/Z32 rotor, SS lines, pads
#162
Yes, I'm basicly requiring it. As I won't be supplying the centering rings anymore. So having the Cobra rotors redrilled to the Nissan(maxima) lug nut size will help center the rotor.
#172
For some reason, my computer is not allowing me to open up your user options to pm you but I just want to make sure i'm understanding this:
I need to purchase the brackets from jeff92se, which is only the bracket itself, and then purchase the Cobra rotor. Now, the Cobra rotor that you're selling (AuToMaX_95) is pre-drilled to the Nissan spec correct!?
So by me purchasing the brackets, the rotors, and the ss lines, and purchasing some 300zx calipers, I should be able to use the kit. In other words, the hubcentric ring is no longer needed right!? I did read the post where you were comparing the ring to hood pins, which is extra security, but how secure is the kit without the ring... thats if its still necessary?
I just want to have a clear understanding of this before I purchase... thanks.
-Angel
I need to purchase the brackets from jeff92se, which is only the bracket itself, and then purchase the Cobra rotor. Now, the Cobra rotor that you're selling (AuToMaX_95) is pre-drilled to the Nissan spec correct!?
So by me purchasing the brackets, the rotors, and the ss lines, and purchasing some 300zx calipers, I should be able to use the kit. In other words, the hubcentric ring is no longer needed right!? I did read the post where you were comparing the ring to hood pins, which is extra security, but how secure is the kit without the ring... thats if its still necessary?
I just want to have a clear understanding of this before I purchase... thanks.
-Angel
#174
Hi Jason,
I already have the z32 caliper and the bracket from Jeff, is this all i need to to the 13" cobra bbk conversion.
-PBR ultimate brake pad for the Z32 Front caliper
-ss brake line (front only)
-13inch Cobra rotor (brembo rotors)
let me know the total exact amount for these parts also.
Thanks,
I already have the z32 caliper and the bracket from Jeff, is this all i need to to the 13" cobra bbk conversion.
-PBR ultimate brake pad for the Z32 Front caliper
-ss brake line (front only)
-13inch Cobra rotor (brembo rotors)
let me know the total exact amount for these parts also.
Thanks,
#180
Sorry if this is a big request, but can you give me a total shipped price for the following please?
Pair of Brembo slotted Cobra front rotors DRILLED for Maxima spec
Pair of Brembo 5.5gen slotted rear rotors
Hawk HPS pads for 300ZX calipers
SS lines for 5th gen front and back
Pair of Brembo slotted Cobra front rotors DRILLED for Maxima spec
Pair of Brembo 5.5gen slotted rear rotors
Hawk HPS pads for 300ZX calipers
SS lines for 5th gen front and back
#185
Let me know if i am wrong , i need the bracket from Jeff and the 30mm z32 caliper elsewhere. So all i need from you are :
-Hawk HPS brake pad for the Z32 Front caliper
-SS brake line (front only)
-13" Cobra rotor Brembo Cross Drilled (Drilled for Maxima spec)
Did i miss out any items of i did please let me know. Also if im correct about the parts that i need then please PM all the prices for the items i listed.
Thank Mike
-Hawk HPS brake pad for the Z32 Front caliper
-SS brake line (front only)
-13" Cobra rotor Brembo Cross Drilled (Drilled for Maxima spec)
Did i miss out any items of i did please let me know. Also if im correct about the parts that i need then please PM all the prices for the items i listed.
Thank Mike
#194
Any news on the 2pc cobra rotors? Also what is the price for the cobra rotors shipped to 95831? I've sent you a PM asking about the 2pc cobra rotors.
Last edited by The Law; 10-07-2008 at 12:51 AM.
#197