Payment recieved

thanks
jason

 

Need 2005 drilled/slotted front and rear rotors shipped to Nashville, TN.

 

$245 shipped

is your total

jason

 

Add the ultimate pads please. Paypal on the way for total.

 

I sent a paypal on May 9 for $138 for front rotors 2004. Is that the correct price? I got a message from you saying $245. I tried to PM back but your box is full. Let me know. Thanks

 

Jay can you give me a total price shipped for a set of 2k4 front and rear drilled/slotted rotors and a set of the PBR Ultimate pads...shipped to 07840? I'll be getting them by the end of the mth hopefully but want to know my total. thnaks again

 

Zinc are no longer aviable only powdercoated BLACK

For people that already order, we no longer have zinc aviable, if you want full refund please let me know asap, if you want powdercoated black please let me know asap so I can go on and process your order.

For people that ask for pricing infos same with you guys.

Sorry about the inconviences.

Powdercoated black hub/inner vent area to prevent rust, guarantee won't rust and will last longer than zinc. Pricing for P.B are usually $30-$50 more compare to zinc but I will not change the price.

regards
jason

 

you got e-mail

NASH please check your p.m

Smoken'04
your grand total is $345 shipped with the F/R Ultimate pads
let me know if you want the Powdercoated black

thanks
jason

 

so the rotors themselves are powdercoated black? How will they hold up? will the powdercoating rub down evntually? I'd hate to have a black rotor with a silver circle rubbed into it from the pads. If they are guaranteed to stay black for the life of them, then I'm sold. Thanks Jay

 

Powdercoated WILL last longer than zinc thats why they cost more(no one are willing to pay because rotor only last about 20k miles or so) anyways they will not run down for the life of the rotor and WILL stay black.

p.s keep in mind the only part that has been powdercoated is the innervent/center hub. Surface area are not powdercoated because when brake pad hits the surface it heats up everything.

 

Can i purchase just the brake fluid from you????

 

sure, let me know how many bottles you need.

 

Money sent for one bottle.....

 

Jason:

I'm interested in using your rotors on the front of my 2002 Maxima - I know I'll also need to upgrade my caliper to a 6th gen. I am very concerned about the added weight of the 6th gen rotors vs. the 5.5 gen rotors. Any chance you could tell me the weight of a single front 6th gen rotor which is a) normal - not cross drilled/slotted/dimpled and b) cross drilled? Also, please confirm the price for each of these rotor types with the powder coating. Thanks in advance.

Andrew

 

PayPal sent for my F/R Slotted rotors.
thanks again Jason

 

Justin
Paypal received, your order will be ship out early next week


thanks!
jason



Andrew
sorry for the late reply, a pair of Front 2000-2003 maxima rotors is 32lbs A pair of 2k4 rotor is 44lbs.
Pricing for powdercoated is $100 a pair. You will NOT FIND this cheap of a price anywhere. Since we sold out on the zinc we are offering the powdercoated at no extra charge. I will stop the deal once it hits the deadline so please if you want to order, order one now. After the deadline the powdercoated rotor will be $140 a pair and that is still very cheap!

jason

 

your order has been shipped please track it at www.ups.com

jason

 

HI,

Sorry to ask, but what does RTP stand for?
Is it the rotor manufacturer name?
Is there a web site for their products as I never heard from them before?

And one last question, do you or would you ship to Canada?

Tx

 

hi
RTP= RaceTechPerformance
RTP rotor are manufacture by our manufacturer, we have 3 month warrenty against any craftmentship defect.
The website is in the process of upgrading, there will be more informations on them once the site is back up.
And yes we ship to canada


let me know if you have more questions

Regards
jason

 

I'm considering buying the cross drilled/slotted rotors. Can anyone post any experience with these? I have read here and there about the crossdrilled and how it sometimes hurts the strength of the rotor etc. I've had slotted ones on my 96 altima but want something the different that's going to last...thanks guys

 

if you want somthing that will last, blanks will be better off for you. Xdrill/slotted will hurt the strength of the rotor only when the inner vent is damage.

 

so on an average.....how long will the cross drilled/slotted last me? if I remember right, you can't cut them again right? I want them to last but I really don't want just "blanks"

meant to pm you on this.......sorry

 

xdrill/slotted, slotted, xdrill only, dimpeld, and dimpeld/slotted can ALL BE RESURFACE.

on AVERAGE xdrill/slotted last about 15-20k or more.

p.m send
thanks
jason

 

payment sent via paypal for:

2k4 xdrilled/slotted with black powdercoating
2k4 PBR Ultimate Pads

Thanks for all the answers to my questions and this offer!

 

payment received!

thank you
jason

 

Hey jason....

you sent me some brake pads instead of the brake fluid

 

can you give me the paypal account u paypal me with?

 

Just sent paypal payment for F/R rotors for my 2004. When you get both F/R Ultimate pads back in, I'll come back for those...

Thanks!

 

m_compas@hotmail.com

 

GD ARE NOW OVER

 

Damn, just missed it!

 

hopefully another groupdeal starts in sept when he comes back...ill be needing brakes then for my 2k. lookin to get the 2k4 rotors pads and calipers..i heard its a perfect fit

 

Thanks for the hookup on these Jay. Got mine in on Friday but haven't had the chance to do the install yet. All I can say though is they look puurty! Thanks again!

 

glad you liked everything =)


guys I am leaving tonight at mid-night june 9 when I come back I will start another GD.


be safe
jason

 

Group deals are back guys Let me know what you need!

 

Very nice Jay, here we go:
Zinc plated cross drilled/slotted. $200 For Front and Rear
Axxis/PBR Ultimate pads are $-$100 F/R
$100 for F/R techna-FIT Stainless steel brake lines (life time warrenty against Craftment defect)

So $400 total. Can I pick them up? PM me and let me know....
Jay

 

Yes you can pick these up

let me know when you are ready, it will take couple of days to get them ready for you

thanks!
jason

 

Looking at my calendar, it might be better to ship them is it still $45 even though I'm pretty local? And caould I pick up on a weekend?
Either way go ahead and get me the parts and I'll pick them up or have you ship them ASAP.
Thanks!

 

No problem, I will let you know when is ready...

Regards
jason

 

Let me know when it's ready and I'll let you know whether I'll p/u or not.
Are weekends good for you or no?
J