Midway Nissan's June Special
#41
Originally Posted by Army of Maxima
dantech... I asked how much (if available) are the wiring harnesses for a 2002/2003 Maxima GLE tail lights?
#42
Originally Posted by NOCturnalI30
A valve body for a 2000 maxima? how much?
\
\
#43
Originally Posted by nexgenmax
Dan, I'm thinking to replace my clutch pretty soon, do you know what parts do i need? I might need a gen 5 clutch of upgrade. Can anybody help me with this? what parts do i need? thx.
Please let me know if this post not at its place. thx.
Please let me know if this post not at its place. thx.
Hope this helps.
#45
I've had a power steering hose leak for a while, I had someone turning the wheel while the car was running but I can't tell directly where it is coming from, and it's not leaking directly from the resourvoir. The fluid that leaked out is mostly on the frame under the radiator. I don't believe I would need the whole hose assembly. Do you have a part number and a price for the two hoses that run in front of the radiator ?
#47
Originally Posted by JiggsHall
I've had a power steering hose leak for a while, I had someone turning the wheel while the car was running but I can't tell directly where it is coming from, and it's not leaking directly from the resourvoir. The fluid that leaked out is mostly on the frame under the radiator. I don't believe I would need the whole hose assembly. Do you have a part number and a price for the two hoses that run in front of the radiator ?
#48
Originally Posted by dantech
To add the frame to your cart, its part number "frame". Do you need the other number also?
#51
Originally Posted by dantech
There is a upper body (31711-85X00) and a lower body (31713-85X00). You can do a factory number search for that here: http://www.trademotion.com/partlocat...24&catalogid=0
I mean the transmition VB for a 2000 I30 im not sure what i am seeing with those part numbers
#52
Originally Posted by Snolife
Oh ok, I will do it tonight when I get home from work. Just make sure that I get the "Altima" frame. I will pm you the order number if you need it after I place my order, thanks again.
#53
Originally Posted by JiggsHall
Dan,
How much are 49725MC and 49725 MD ?
How much are 49725MC and 49725 MD ?
The look about $14 each.
#54
Originally Posted by kevdog
hey dan i need a canister purge control valve i cant find one anywere its for a 95 maxima.
#56
Im afraid I have some potentially annoying questions.
Ive heard that the bumpers for a 95 maxima are like 25 lbs lighter, front only!!!! (vs 96)
Can you comment on this, and if true, can let me know what I would have to buy to get the benefits of the weight reduction? If its true, and I can get 50 lbs reduction I'd be into front and rear... From what Ive heard filling with foam would be lighter than buying all the bumper parts.
Sorry to be so uninformed, your help would be majorly appreciated and you would have a fan for life.
Also, I probably need some MEVI replacement parts. Is this something you can do?
Ive heard that the bumpers for a 95 maxima are like 25 lbs lighter, front only!!!! (vs 96)
Can you comment on this, and if true, can let me know what I would have to buy to get the benefits of the weight reduction? If its true, and I can get 50 lbs reduction I'd be into front and rear... From what Ive heard filling with foam would be lighter than buying all the bumper parts.
Sorry to be so uninformed, your help would be majorly appreciated and you would have a fan for life.
Also, I probably need some MEVI replacement parts. Is this something you can do?
#57
I need the rubber thingy here
And the two hoses here.
Do you have part numbers?? Also, theses part numbers dont work on your website for the parts required to change exhaust studs.
http://www.4dsc.com/articles/drivetr...ld_studs.shtml
Do I need to call in??
thnx
And the two hoses here.
Do you have part numbers?? Also, theses part numbers dont work on your website for the parts required to change exhaust studs.
http://www.4dsc.com/articles/drivetr...ld_studs.shtml
Do I need to call in??
thnx
#58
I'm lookin to order new pads and rotors front and back for my 95. When ordering, do I need to order 2 front brake pads or just 1? I assume the rotors come as each so I would need to order 2 fronts and 2 backs.
#59
Originally Posted by dantech
Yes you did. I asked back if you knew which model Maxima you had. I can tell by the VIN if you have it handy. You can contact me at shiftparts@gmail.com. Thanks
I've done this before, and I had two price quotes... one at $75 and one at $73... I want to see what your price is?
??
#60
Originally Posted by Spaniard
Im afraid I have some potentially annoying questions.
Ive heard that the bumpers for a 95 maxima are like 25 lbs lighter, front only!!!! (vs 96)
Can you comment on this, and if true, can let me know what I would have to buy to get the benefits of the weight reduction? If its true, and I can get 50 lbs reduction I'd be into front and rear... From what Ive heard filling with foam would be lighter than buying all the bumper parts.
Sorry to be so uninformed, your help would be majorly appreciated and you would have a fan for life.
Also, I probably need some MEVI replacement parts. Is this something you can do?
Ive heard that the bumpers for a 95 maxima are like 25 lbs lighter, front only!!!! (vs 96)
Can you comment on this, and if true, can let me know what I would have to buy to get the benefits of the weight reduction? If its true, and I can get 50 lbs reduction I'd be into front and rear... From what Ive heard filling with foam would be lighter than buying all the bumper parts.
Sorry to be so uninformed, your help would be majorly appreciated and you would have a fan for life.
Also, I probably need some MEVI replacement parts. Is this something you can do?
#61
Originally Posted by aminus21
Do you have part numbers?? Also, theses part numbers dont work on your website for the parts required to change exhaust studs.
thnx
#62
Originally Posted by NYR1199
I'm lookin to order new pads and rotors front and back for my 95. When ordering, do I need to order 2 front brake pads or just 1? I assume the rotors come as each so I would need to order 2 fronts and 2 backs.
#64
Originally Posted by Army of Maxima
dantech... it doesn't matter which model I have... I have a 2000 GLE that I am putting 2002/2003 tail lights on... the harness from the 2000 does not fit in the 2002/2003 housing, so I need the wiring harnesses (2) for a 2002/2003 Maxima (all the same)...
I've done this before, and I had two price quotes... one at $75 and one at $73... I want to see what your price is?
??
I've done this before, and I had two price quotes... one at $75 and one at $73... I want to see what your price is?
??
#66
Originally Posted by dantech
I havent actually heard that before but it does sounds like it would work. Makes sense that if you changed the bumper from steel to styrofoam you would decrease the overall vehicle weight. Id find someone who has done that before and see whats involved.
Also, do you sell the MEVI parts separately?
(The "arm" thing sticks- I think the rubber gasket in it is faulty (too big) and so it doesnt spring back from open, and takes too long TO open.)
#67
Originally Posted by Spaniard
Thanks, I would appreciate it big time!!
Also, do you sell the MEVI parts separately?
(The "arm" thing sticks- I think the rubber gasket in it is faulty (too big) and so it doesnt spring back from open, and takes too long TO open.)
Also, do you sell the MEVI parts separately?
(The "arm" thing sticks- I think the rubber gasket in it is faulty (too big) and so it doesnt spring back from open, and takes too long TO open.)
#70
Originally Posted by dantech
Your gonna have to help me with "MEVI". Im not familiar with that term.
http://www.courtesyparts.com/Merchan...duct_Code=MEVI
I need the little bronze part in the upper right.
EDIT: Actually, if you hold off on it I will get the part # for you, only fair.
Still interested in the lightweight bumpers for a 95-
#73
Originally Posted by dantech
The part numbers for the two hoses and the bumper are 65822-01M00, 14099-85E01, and 11826-85E10. All of the numbers that you have listed on that site are available also now. You can do a factory number search for all of those here: http://www.trademotion.com/partlocat...24&catalogid=0
Placed order.. Order number 12447210
Thank you for the part numbers
#75
Originally Posted by NYR1199
Dan, I just placed the order for brake parts.
Order ID: 12445525
The shipping was $32.37 , I assume this gets refunded?
Order ID: 12445525
The shipping was $32.37 , I assume this gets refunded?
#76
dantech... that top photo? From a 2004/2005 Maxima (!!!)
the bottom photo... from a 5th gen... but I can't tell which one.
how much for the wiring harness (2 total) for a 2003 Maxima?
thanks!
the bottom photo... from a 5th gen... but I can't tell which one.
how much for the wiring harness (2 total) for a 2003 Maxima?
thanks!
Originally Posted by dantech
Okay the year thing. There is a listing in my Nissan catalogs for 06/01 to 12/02. That part number is 26551-5Y700. The next listing is 01/03 up and that number is 26551-7Y000. Here are a few pics to help you see what Im talking about.
#77
Originally Posted by Army of Maxima
dantech... that top photo? From a 2004/2005 Maxima (!!!)
the bottom photo... from a 5th gen... but I can't tell which one.
how much for the wiring harness (2 total) for a 2003 Maxima?
thanks!
the bottom photo... from a 5th gen... but I can't tell which one.
how much for the wiring harness (2 total) for a 2003 Maxima?
thanks!
I ordered THIS part #8
#80
Originally Posted by Spaniard
Pardon the competitor's link-
http://www.courtesyparts.com/Merchan...duct_Code=MEVI
I need the little bronze part in the upper right.
EDIT: Actually, if you hold off on it I will get the part # for you, only fair.
Still interested in the lightweight bumpers for a 95-
http://www.courtesyparts.com/Merchan...duct_Code=MEVI
I need the little bronze part in the upper right.
EDIT: Actually, if you hold off on it I will get the part # for you, only fair.
Still interested in the lightweight bumpers for a 95-