Radiator Cooling Panels
Thanks Larry. I'll take into consideration what you are saying and look again at the situation this weekend. I'll get back to you on this...
Originally Posted by Larrio Motors
Mr. Wizard: after studying your pictures longer, what you are referring to as a defect is actually just a design mis-interpretation.
The middle portion of the panel is flattened from the curve of the bumper as to not stick out when the hood is closed. I just took a look at a local 4th gen that had this on his car. If the panel "flowed" along the bumper, you would see if wedged between the rubber weather stripping and the bottom of the hood. So as you can see, when the sides line up properly the middle portion is trimmed back to retain clearance. And there is plenty of room under the radiator support for the shroud to sit with nothing in its way.
If you still unsatisfied with this answer, please let me know. Thank you
The middle portion of the panel is flattened from the curve of the bumper as to not stick out when the hood is closed. I just took a look at a local 4th gen that had this on his car. If the panel "flowed" along the bumper, you would see if wedged between the rubber weather stripping and the bottom of the hood. So as you can see, when the sides line up properly the middle portion is trimmed back to retain clearance. And there is plenty of room under the radiator support for the shroud to sit with nothing in its way.
If you still unsatisfied with this answer, please let me know. Thank you
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
Dec 20, 2021 06:57 PM
magiconthetire
Audio and Electronics
2
Oct 26, 2015 09:03 PM
