$100 DIGITAL SLIM HID KITS 35W - NOT ANALOG
04-30-2008, 06:02 PM
#44
Senior Member
Join Date: Nov 2007
Location: Fort Walton Beach
Posts: 679
I just ordered the 50w kit to replace my stock headlights so I have the same color, brightness, & texture as my HID headlights. Not going to worry about the re-wiring right now so I don't have to have my headlights on to have the fog lights on.
Umnitza: Pm Sent
Umnitza: Pm Sent
04-30-2008, 06:16 PM
#45
04-30-2008, 06:36 PM
#46
Senior Member
Join Date: Nov 2007
Location: Fort Walton Beach
Posts: 679
done
05-03-2008, 04:36 AM
#49
Senior Member
Join Date: Nov 2007
Location: Fort Walton Beach
Posts: 679
I'll let you know when I get 'em
05-04-2008, 10:49 AM
#50
Member
Join Date: Dec 2002
Posts: 136
I ordered the 4300k 35w slim ballasts from umnitza and got the package right away. Excellent service and response. I did have a little trouble with the H4 connector and it just required me to switch the ground and power prongs on the connector. That fixed it quick.
05-04-2008, 10:06 PM
#51
Senior Member
Join Date: Nov 2000
Posts: 2,108
Been looking for an upgrade to my headlights and fog lights for a while now for my 2k2. These kits seem awesome for the price, and the warranty to boot!
Anyway, If I buy a 50w kit in 6000k, I take it you have D2R bulbs to match, without haveing to buy a whole kit and rewireing everything, correct?
Also, how do these fare next to say, Prolumen, Mtec and some of those others on the org? Any problems with throwing errors?
thanks!
Anyway, If I buy a 50w kit in 6000k, I take it you have D2R bulbs to match, without haveing to buy a whole kit and rewireing everything, correct?
Also, how do these fare next to say, Prolumen, Mtec and some of those others on the org? Any problems with throwing errors?
thanks!
05-04-2008, 11:31 PM
#52
Should be Monday
They are made in the same factory as the best named kits out there, but without a brand name to keep costs lower (marketing costs do add to the cost of a kit).
No problems should be experienced with errors. No rewiring.
---
Thanks DR3.
If you could do an iTrader rating, ours is a bit "dated"
Been looking for an upgrade to my headlights and fog lights for a while now for my 2k2. These kits seem awesome for the price, and the warranty to boot!
Anyway, If I buy a 50w kit in 6000k, I take it you have D2R bulbs to match, without haveing to buy a whole kit and rewireing everything, correct?
Also, how do these fare next to say, Prolumen, Mtec and some of those others on the org? Any problems with throwing errors?
thanks!
Anyway, If I buy a 50w kit in 6000k, I take it you have D2R bulbs to match, without haveing to buy a whole kit and rewireing everything, correct?
Also, how do these fare next to say, Prolumen, Mtec and some of those others on the org? Any problems with throwing errors?
thanks!
No problems should be experienced with errors. No rewiring.
---
Thanks DR3.
If you could do an iTrader rating, ours is a bit "dated"
05-05-2008, 02:27 PM
#53
Senior Member
Join Date: Nov 2007
Location: Fort Walton Beach
Posts: 679
Box received, minor damage to the box, but not to the product (as of right now). I'll work on getting them installed tonight or tomorrow. I have to get some night shots prior to ya know...you know how project pictures are
Well I started tonight, had to take the bumper off to get to everything, (install the ballast) however there weren't any instructions in the box and I couldn't find anything online to wire up the H11 4300k 50w. Any assistance would greatly be appreciated.
Well I started tonight, had to take the bumper off to get to everything, (install the ballast) however there weren't any instructions in the box and I couldn't find anything online to wire up the H11 4300k 50w. Any assistance would greatly be appreciated.
Last edited by cfr94; 05-05-2008 at 07:39 PM.
05-05-2008, 11:03 PM
#54
Senior Member
Join Date: Nov 2000
Posts: 2,108
Should be Monday
They are made in the same factory as the best named kits out there, but without a brand name to keep costs lower (marketing costs do add to the cost of a kit).
No problems should be experienced with errors. No rewiring.
---
Thanks DR3.
If you could do an iTrader rating, ours is a bit "dated"
They are made in the same factory as the best named kits out there, but without a brand name to keep costs lower (marketing costs do add to the cost of a kit).
No problems should be experienced with errors. No rewiring.
---
Thanks DR3.
If you could do an iTrader rating, ours is a bit "dated"
Also, what is the cost for a set of bulbs, D2R 6000k, to match the 6000k fog kit?
Lastly, you said no rewiring is necessary, but I am assuming the H3 size will fit in the fog housing with no modifications?
thanks!
05-06-2008, 11:28 AM
#55
Box received, minor damage to the box, but not to the product (as of right now). I'll work on getting them installed tonight or tomorrow. I have to get some night shots prior to ya know...you know how project pictures are
Well I started tonight, had to take the bumper off to get to everything, (install the ballast) however there weren't any instructions in the box and I couldn't find anything online to wire up the H11 4300k 50w. Any assistance would greatly be appreciated.
Well I started tonight, had to take the bumper off to get to everything, (install the ballast) however there weren't any instructions in the box and I couldn't find anything online to wire up the H11 4300k 50w. Any assistance would greatly be appreciated.
Make sure to follow the pictured links and if you have questions, just email us
H3 will fit no rewiring necessary for fog housing.
05-06-2008, 06:25 PM
#56
Senior Member
Join Date: Nov 2000
Posts: 2,108
I guess you might have not seen my last question about where they are made. Just wanted to make sure they are NOT made in china.
Also, do you or anyone else have photos of the 50W kit in the fogs? And you also said that there are no modifications required to the 2k2 fogs to get the bulbs in, so I am assuming they dont have the typical problem of hitting the front lens? Another more tecnical question about the fogs is how the bulls will set in the fogs themselves. As you may know, the H3's have the flat backing plate with the two notches on either side, so I am again assuming that the H3 bulbs in the kit are of the same fit?
And lastly, do the bulbs have a 2 year warranty?
Ill buy the two bulbs and H3 kit as soon as I see some photos.
Thanks!
Also, do you or anyone else have photos of the 50W kit in the fogs? And you also said that there are no modifications required to the 2k2 fogs to get the bulbs in, so I am assuming they dont have the typical problem of hitting the front lens? Another more tecnical question about the fogs is how the bulls will set in the fogs themselves. As you may know, the H3's have the flat backing plate with the two notches on either side, so I am again assuming that the H3 bulbs in the kit are of the same fit?
And lastly, do the bulbs have a 2 year warranty?
Ill buy the two bulbs and H3 kit as soon as I see some photos.
Thanks!
05-07-2008, 12:31 AM
#58
Just to verify, the 6000ks you carry are in the bluish tint, not the purplish tint, correct?
Would you happen to have any pictures of the 6000ks in action? I'm looking to replace my HID fog kit.
Would you happen to have any pictures of the 6000ks in action? I'm looking to replace my HID fog kit.
05-07-2008, 10:17 AM
#59
I guess you might have not seen my last question about where they are made. Just wanted to make sure they are NOT made in china.
Most all HID kits these days are made in China - either in the ever expanding Changzhou province or the lighting area of Qingdao or Nanjing. There are ever expanding factories there and the smog is proof of this.
These companies make parts for Philips of Asia, GE, and many other well known "brands".
If your desire for them not to be made in china is political and not quality specific, then I agree with you on that front, the human rights and worker's rights and heck safety overall is not very good there, but it's gotten better and will probably continue to do so.
Also, do you or anyone else have photos of the 50W kit in the fogs? And you also said that there are no modifications required to the 2k2 fogs to get the bulbs in, so I am assuming they dont have the typical problem of hitting the front lens? Another more tecnical question about the fogs is how the bulls will set in the fogs themselves. As you may know, the H3's have the flat backing plate with the two notches on either side, so I am again assuming that the H3 bulbs in the kit are of the same fit?
And lastly, do the bulbs have a 2 year warranty?
Ill buy the two bulbs and H3 kit as soon as I see some photos.
Thanks!
Most all HID kits these days are made in China - either in the ever expanding Changzhou province or the lighting area of Qingdao or Nanjing. There are ever expanding factories there and the smog is proof of this.
These companies make parts for Philips of Asia, GE, and many other well known "brands".
If your desire for them not to be made in china is political and not quality specific, then I agree with you on that front, the human rights and worker's rights and heck safety overall is not very good there, but it's gotten better and will probably continue to do so.
Also, do you or anyone else have photos of the 50W kit in the fogs? And you also said that there are no modifications required to the 2k2 fogs to get the bulbs in, so I am assuming they dont have the typical problem of hitting the front lens? Another more tecnical question about the fogs is how the bulls will set in the fogs themselves. As you may know, the H3's have the flat backing plate with the two notches on either side, so I am again assuming that the H3 bulbs in the kit are of the same fit?
And lastly, do the bulbs have a 2 year warranty?
Ill buy the two bulbs and H3 kit as soon as I see some photos.
Thanks!
THe h3 kit is installed by squeezing the metallic base holders together onto the bulb and they should not hit the lens.
$65 + shipping - $5
here's a good photo:
# 3K, 3K, 4K, 4K,
# 5K, 5K, 6K, 6K,
# 8K, 8K, 10K, 10K,
# 12K, 12K, 3K, 3K,
05-07-2008, 10:56 AM
#60
Member
Join Date: Sep 2000
Posts: 33
Is the price for bixenon the same? I am looking for a set of an '08 pathfinder.
Thanks,
Chan
Thanks,
Chan
05-07-2008, 02:59 PM
#63
Do you want a dual d2s application?
paypal@umnitza.com - not through the site.
h3 3K are out of stock til Monday, but it's the same price.
05-10-2008, 08:42 AM
#70
We have 50W H7 in stock. The only discount is 1X shipping instead of 2.
Please email us, we don't get notified on PMs.
thanks!
05-12-2008, 05:48 PM
#73
Senior Member
Join Date: Jun 2005
Location: Philadelphia, PA
Posts: 2,898
Man HIDs are getting cheaper and cheaper... good stuff! I have a question about some D2R replacement bulbs for an 03 maxima. If I were to get some 6000k 50 watt bulbs, what are we talking in terms of brightness to other drivers?
05-12-2008, 06:46 PM
#74
I just ordered these today at 10:00 this morning. I already got an email with them being shipped out. Now that is by far the fastest shipping from any company I've ever dealt with before.
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
05-13-2008, 06:55 AM
#75
I just ordered these today at 10:00 this morning. I already got an email with them being shipped out. Now that is by far the fastest shipping from any company I've ever dealt with before.
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
05-13-2008, 09:07 AM
#76
I just ordered these today at 10:00 this morning. I already got an email with them being shipped out. Now that is by far the fastest shipping from any company I've ever dealt with before.
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
Customer service is awesome and I'm looking forward to getting this kit on. Thanks again man...
