BIG Cattman Performance End-of-Year SALE
12-17-2008, 08:20 AM
#41
Geez, can't believe I overlooked this. Sorry, things have been nuts this week.
Shipping a UDP is "practically free", or in other words, about $12. So, we're looking at a total of $141.99. Great deal on a very worthwhile part.
Brian
Last edited by Cattman; 12-17-2008 at 08:26 AM.
12-17-2008, 08:25 AM
#42
Sorry, we just can't break up our spring sets. The rear pair could sit for years before someone wanted them. If you can find someone who just wants rears, split the set between you.
Also, I think its not such a good idea to mix spring or strut sets on the car. Impossible to predict how that might affect affect the vehicle's handling during an emergency maneuver, for example.
Brian
12-17-2008, 10:22 AM
#43
Sorry, we just can't break up our spring sets. The rear pair could sit for years before someone wanted them. If you can find someone who just wants rears, split the set between you.
Also, I think its not such a good idea to mix spring or strut sets on the car. Impossible to predict how that might affect affect the vehicle's handling during an emergency maneuver, for example.
Brian
Also, I think its not such a good idea to mix spring or strut sets on the car. Impossible to predict how that might affect affect the vehicle's handling during an emergency maneuver, for example.
Brian
Someone was selling a rear pair used, and I was checking to see if I could pick up a front set to complete them.
12-23-2008, 11:29 AM
#48
Harold
12-29-2008, 03:52 PM
#49
Brian, any chance that you could make ( or show ) the actual diameter of the header pipe at the header flange? I'm interested in upgrading to ported heads for my next engine build, and larger-diameter tubes would be needed for them. If you make them, I'm an instant customer.
Harold
Harold
I'm back in the office now after being away from the internet for a week, sorry for the slow reply.
I'll send a PM regarding your question.
Brian
12-30-2008, 11:06 AM
#51
Hey Brian, do you sell any OEM suspension parts for the 95-99 Maxima?
I've got some money in Paypal that I'd like to use, but can't find any OEM parts places that take Paypal, lol.
I'm basically looking for some strut mounts/dustboots for now.
I've got some money in Paypal that I'd like to use, but can't find any OEM parts places that take Paypal, lol.
I'm basically looking for some strut mounts/dustboots for now.
01-15-2009, 01:49 PM
#53
I can't believe that I've overlooked this for two weeks... geez. Anyway, I'd recommend the KYB dustboots/bumpstops and the Nissan upper front strut mounts. You can buy both from us, using paypal. Just give us a call at 800.759.9920 if you haven't spent your money already!
Brian
01-20-2009, 12:05 PM
#55
Hey Brian. What's the price for the header/y-pipe combo going to be like for the month of February? It's tax season! 
Edit: It's for an 02 maxima.
Edit: It's for an 02 maxima.
Last edited by nismology; 01-20-2009 at 03:54 PM.
01-24-2009, 11:14 PM
#56
Hey brian...Are you still doing deals?
If so im interested in a Cattman Exhaust....catback that is....I just had a few questions about fittment and rattling against the section where the Midpipe connects to the rear section
thanks....
PS i also left you a voicemail on Saturday afternoon (1/24/09)
If so im interested in a Cattman Exhaust....catback that is....I just had a few questions about fittment and rattling against the section where the Midpipe connects to the rear section
thanks....
PS i also left you a voicemail on Saturday afternoon (1/24/09)
01-25-2009, 08:19 AM
#57
RSB for 2007 maxima
Brian,
Do you have any rear sway bar for a 2007 maxima? Also, do you have any front strut tower brace? PM me and let me know prices. Thanks.
Do you have any rear sway bar for a 2007 maxima? Also, do you have any front strut tower brace? PM me and let me know prices. Thanks.
02-07-2009, 09:55 AM
#60
Hi Brian,
I'm going to need a new exhaust system for 02 Maxima SE come this spring. However I do not want to pay dealership prices on another system that will rust again when I can get stainless for less. I've read nothing but good reviews about the Cattman exhaust off this forum. I am interested in your 2.5" system but I have a question about the sound levels. One thing I do like about the stock exhaust is the relatively quiet sound (also used as a family vehicle). How much louder is your exhaust compared to the stock? I've tried to find some sound clips off of the Internet but I could not. All I could find were ones with both exhaust, Y-pipe and/or headers which I am not interested in. All I need is the full catback system.
Thanks.
I'm going to need a new exhaust system for 02 Maxima SE come this spring. However I do not want to pay dealership prices on another system that will rust again when I can get stainless for less. I've read nothing but good reviews about the Cattman exhaust off this forum. I am interested in your 2.5" system but I have a question about the sound levels. One thing I do like about the stock exhaust is the relatively quiet sound (also used as a family vehicle). How much louder is your exhaust compared to the stock? I've tried to find some sound clips off of the Internet but I could not. All I could find were ones with both exhaust, Y-pipe and/or headers which I am not interested in. All I need is the full catback system.
Thanks.
02-09-2009, 03:03 PM
#63
The small ES bushing sets ship for only $7 (2-3 day) and all the bushing sets (together) for the 4th or 5th gen Maximas ship for just $13 (2-3 day). I've seen some internet companies charging $18-25 to ship the same parts.
Brian
02-09-2009, 03:16 PM
#65
Thanks for asking. For your car (which, like other late 2001-2003 Maximas, doesn't have an EGR on the bank one manifold), the retail price is $859.99 but since we're waiting on the next batch, the backorder price is $795.49.
For 1995-early 2001 Maximas that do require an EGR port, the retail price is $889.99 and backorder price is $822.99.
Backorders need to be placed right away, we'll be finalizing the production numbers very soon with completion expected in early March. I'll remind that the Cattman Performance backorder policy is that we do not accept any payment until the parts are ready to send to you.
Orders (and backorders) are taken by phone, at 800.759.9920 (US except AZ) and 888.296.5153 (Canada and AZ) and our hours are 9-5 MST, M-F.
Brian
02-09-2009, 03:17 PM
#66
Hey brian...Are you still doing deals?
If so im interested in a Cattman Exhaust....catback that is....I just had a few questions about fittment and rattling against the section where the Midpipe connects to the rear section
thanks....
PS i also left you a voicemail on Saturday afternoon (1/24/09)
If so im interested in a Cattman Exhaust....catback that is....I just had a few questions about fittment and rattling against the section where the Midpipe connects to the rear section
thanks....
PS i also left you a voicemail on Saturday afternoon (1/24/09)
I think we've talked about this.
Brian
02-09-2009, 03:27 PM
#67
Yes, we have Progress RSBs in stock but I haven't seen a FSTB out there that I really like, we still don't carry one of those. We'd love to find a North American based suspension designer/fabricator that works with small batches and could take this on, so if anyone has any suggestions send me a PM. [I like tubular, so maybe I'm looking for a small bike frame fabricator who's short on work...]
I'll PM with prices (you may have purchased one by now).
Brian
Too busy with some other projects lately, but I'll get back to it.
02-09-2009, 03:46 PM
#69
Hi Brian,
I'm going to need a new exhaust system for 02 Maxima SE come this spring. However I do not want to pay dealership prices on another system that will rust again when I can get stainless for less. I've read nothing but good reviews about the Cattman exhaust off this forum. I am interested in your 2.5" system but I have a question about the sound levels. One thing I do like about the stock exhaust is the relatively quiet sound (also used as a family vehicle). How much louder is your exhaust compared to the stock? I've tried to find some sound clips off of the Internet but I could not. All I could find were ones with both exhaust, Y-pipe and/or headers which I am not interested in. All I need is the full catback system.
Thanks.
I'm going to need a new exhaust system for 02 Maxima SE come this spring. However I do not want to pay dealership prices on another system that will rust again when I can get stainless for less. I've read nothing but good reviews about the Cattman exhaust off this forum. I am interested in your 2.5" system but I have a question about the sound levels. One thing I do like about the stock exhaust is the relatively quiet sound (also used as a family vehicle). How much louder is your exhaust compared to the stock? I've tried to find some sound clips off of the Internet but I could not. All I could find were ones with both exhaust, Y-pipe and/or headers which I am not interested in. All I need is the full catback system.
Thanks.
As far as I know, othe Cattman catback exhaust - due to the long resonator and well-stuffed muffler we use - is the quietest performance exhaust currently in production. I can also say that at least 9 out of 10 customers are very satisfied with the sound; a few think they're too quiet and a few too loud, but we think we've hit the sweet spot with our 4th and 5th gen catbacks (the 6th gen catback is going to get quieter). Its difficult to say more than that with words; describing the sound as "a little" or "a lot" compared with something else isn't useful.
I suspect that the sound clip you're looking for is out there someplace, but like all sound clips, it won't sound much like the car and its absolutely impossible to determine how loud the car actually is by listening to it.
You might get a crude hint from a clip about tone or pitch, but since volume can't be referenced during recording or playback, sound clips don't provide a clue. If your computer sound card is turned up the exhaust will seem too loud, if its turned down you'll be fooled into thinking its quieter than it really is.
If you live anywhere near a regional Maxima group check out the next meet or picnic, you're sure to find a Cattman catback. Try asking other owners online too. In any case, we have another batch coming up in a few weeks.
Brian
02-09-2009, 03:48 PM
#70
Brian C Catts
Cattman Performance
02-09-2009, 08:07 PM
#72
Newbie - Just Registered
Join Date: Feb 2009
Posts: 10
I apologize if its been asked before, but will you guys be making any sort of catback exhaust or so for 3rd gen maxs? GXE in particular? thanks for any response!
-Melvin
-Melvin
02-12-2009, 04:24 PM
#74
Hey Brian,
I haven't got your E-Mail on the maxima for sale yet. Did you get my e-mail right?
Mailingbrandon@gmail.com
I haven't got your E-Mail on the maxima for sale yet. Did you get my e-mail right?
Mailingbrandon@gmail.com
02-12-2009, 11:50 PM
#76
Ya I didnt get it for some reason and I wanted to make sure you have my e-mail right because I dont want to miss transfering the money to my acount when you need it. LOL that woud suck LOL.
02-14-2009, 08:17 PM
#77
The "re-intro" price is $349.99, which is less than the retail price was two years ago - pretty remarkable given the enormous increase in steel and other costs since then.
Yes, I'm speaking of a stand-alone y-pipe, meaning that it is a stock part replacement (and doesn't go with headers).
No, our stand-alone y-pipe design does not feature equal-length downpipes. That feature doesn't add performance, but we include it in our header y-pipes because it makes them sound much better (if done just right). This feature would add at least $50 to the price, and I don't feel that its justified for this OE replacement part.
Brian
Yes, I'm speaking of a stand-alone y-pipe, meaning that it is a stock part replacement (and doesn't go with headers).
No, our stand-alone y-pipe design does not feature equal-length downpipes. That feature doesn't add performance, but we include it in our header y-pipes because it makes them sound much better (if done just right). This feature would add at least $50 to the price, and I don't feel that its justified for this OE replacement part.
Brian
Thanks,
Madmax8
02-25-2009, 12:39 PM
#80
Hey Brian,
I Tryed to show my roommate the cattmobile and the link stopped working? Can you shoot me that E-Mail again, I never got the first one.
Just incase you have my email wrong its Mailingbrandon@gmail.com
Hows the 00 headers comming along? I cant wait :-)
I Tryed to show my roommate the cattmobile and the link stopped working? Can you shoot me that E-Mail again, I never got the first one.
Just incase you have my email wrong its Mailingbrandon@gmail.com
Hows the 00 headers comming along? I cant wait :-)