Bump!

 

Bump!

 

Bump! Plenty of kits in stock. I guarantee you'll have a huge smile on your face when you install this product. If you don't, send it back for a full refund. I'll even cover all your shipping costs so you won't be out a dime! What other company is able to do that for their customers?

http://www.nwpengineering.com/Phenol...tml#TorqueLink

 

Whats going on Aaron! Interested in these for the 7th gen!!!!!!!!

 

Nice car! I don't have any plans to produce one right now for the 7th gen. We have 7 product designs that still need to be released. But I am interested. I just doubt I can get to it anytime soon. Sorry.

 

WE ARE NOW GIVING AWAY OUR BASIC VIAS BLOCK PLATE KITS FOR FREE with the purchase of any Thermal Intake Spacer Kit or our Engine Torque Link Kit!

All you have to do to receive your free VIAS Block Plate Kit is to include your forum screen name during the checkout process and request a free VIAS Kit. Just add your screen name to the message box that says "Are you a member of an automotive discussion forum? If so, which one? What is your name?". Then just say "I want a free NWP BOP!".

There will be no increase in shipping costs or additional taxes. Just a free Basic VIAS Block Plate Kit included with your order.

You may place your order here:

http://www.nwpengineering.com/Phenolic_Spacers.html

 

Bump, for the BEST mod ive done to my max. These product well truly define your max as a 4DSC!!!

 

STOP! Lol Makin me mad that I don't have one for my altima, BUT there's something in the works someone else is making for me, w00t!

 

Does this work with a s/c setup?

 

Good jod Aaron....seen the toyota guys with ones similar, great mod.

 

Thanks everyone.

I'm sorry, it does not. The supercharger gets in the way of where this ETL is located.

 

If you do not have a use for the free NWP Basic VIAS Block Plate Kit, I will be happy to provide free shipping instead. A value of $10. Just follow the instructions one post above and ask for free shipping at the time of your order instead of the free block plate.

 

Also, for the past several months, I have been working on some things to reduce the machining costs on the NWP Engineering Engine Torque Link Kits without sacrificing quality. I will be able to pass these savings onto you. And within the next day or two, I hope to finally be able to release updated pricing on the Engine Torque Link Kits.

I drastically increased the production quantity, which brought the machining costs down. The $160 price was based off of the original production run, where I only ran about 20 kits.

I've actually been working on reducing machining costs on these kits since Spring of this year. I know people look at the brackets and think it's just two steel brackets and a torque link assembly. But look closely at the brackets. They are both made from one solid piece of steel, then zinc plated. No welding at all!

The lower bracket itself is beautiful. No bending or welding! Just machined from a solid piece of steel!



Also, the small upper bracket looks a lot cleaner now than the picture above and has the NWP logo engraved in it. Updated pictures will be coming soon!

 

Who's interested in lower prices for the NWP Engine Torque Link?

 

The more interest that is shown here, the lower the price will be!

We were planning on lowering the price permanently by about $10. But, we want to drop the price considerably more for a limited time only through our Customer Loyalty Sales promotion. So the more interest that is shown, the lower the price will be!

 

EVERY 4TH AND 5TH GEN MAXIMA NEEDS A ETL !!!!

 

I agree. I always tell my customers that if you do not have the biggest smile on your face after romping on the gas with the ETL connected, send it back for a full refund including all your shipping costs. You won't be out a dime! Not many other companies offer that kind of guarantee!

 

New pictures of our latest design! Both brackets are a lot shinier and cleaner looking. The small bracket now has an NWP logo engraved.

And since we have drastically increased our regular production quantity, our machining costs have dropped. We will pass the savings onto you. You should find a lower price posted before the end of the day tomorrow.

The sale pricing is totally dependent on the amount of people that post here in this thread. If you are interested in this kit, please post.

The more interest that is shown here, the lower the price will be!

 

Been wanting them for years now ... but alas nothing for my car

 

Sorry. We have some new stuff in the works for the Altima though. I'm not forgetting about you guys.

 

What do you have? Tell me tell me!?!?!?!?!? I wanttttttt

 

I can't leak any information just yet. Testing is nearing completion on one of the products for the VQ35 Maxima and Altima. I just want a few more hundred miles of testing before I speak about it. But so far, testing has been going great! No surprise there!

 

I only need a few more people to express interest in this Engine Torque Link sale and the price can be as low as $120! The more people that post, the lower the price!

 

Aw man!!

 

Ok, the time has come! We didn't quite get enough people for the $120 price like I wanted, but I am going to do it anyway.

The new price is now $119.99 plus $10.00 shipping!

You may place your order now on our website at the link below:

http://www.nwpengineering.com/Phenol...tml#TorqueLink

This sale is expected to last at least 7 days. Thank you for your support! I guarantee your satisfaction!

 

Ordering tonight Aaron

Thanks again

Jay

 

Thank you. Please let me know if there is anything I can do.

 

$129.99 shipped for the Engine Torque Link for a limited time!

This sale will last until at least this Friday at midnight.

You may place your order here:
http://www.nwpengineering.com/Phenol...tml#TorqueLink

 

Who else is interested in this $119.99 deal? So far, we only have a few people that have paid out of the 10 or so that seemed really interested. If you need more time to gather the funds, please post and let me know so I don't close the sale on you too early.

 

The new look of the ETL looks sooooo much better. Great job Aaron.

 

Thank you. The upper bracket is the biggest change since it's a lot shinier now and has the NWP logo engraved.

 

This sale has been extended until Monday!

 

This sale will end tonight at midnight. If you are interested, get your last minute orders in today. Thank you for everyone's business!

 

I have not updated the NWP website just yet to stop the ETL sale. But, I plan to end this sale by 5pm ET today. If any last minute people want to get in on the $119.99 price, you have less than 5 hours!

After that, the price will go back to $140-150ish. Since we have reduced our machining costs, the price does not need to go back to the $160 retail price.

http://www.nwpengineering.com/Phenol...tml#TorqueLink

 

does this do anything for automatics? (IIRC i asked this somewhere but can not remember for the life of me)

 

Yes, definitely! You will still feel a major increase in throttle response and improvement in traction. If you have a shift kit, you will feel an even bigger difference in the crispness of the shift.

The overall driving experience will feel what a sports car should feel like. I promise you'll have a smile on your face when you connect the ETL and go for a spirited drive or your money back! I'll even pay for your shipping costs for you to return it back to me if you don't like it. That way, you won't be out a dime.

Just let me know if you need an extra day or two to get your funds straight. If so, I can give you this special price. But ONLY if you contact me prior to 5pm ET today, which is when the sale will end.

 

Haven seen brotha nismo in FOREVER

Ive been running one on my auto for over a year. Love it. When i would tach it up or even just romp on it from a standstill id get wheelhop, noticed it more after the shift kit install. Ive since noted that itll just sit down and go if you will since install.

Great mod, easy install, great quality, and easy to follow directions.

 

Spend my time on car audio sites and nissanclub with the alti : D

 

When is the next sale for the link? I whould love to get it for $120

 

I don't know if the price will ever go that low again. But, right now, it is priced at $139.99 on our website instead of $160 retail.

Please send me an email at aaron@nwpengineering.com and I'll see what I can do for you. I should be able to do something since this sale ended so recently.