Originally Posted by umnitza

Each color is individually selectable.
[ANDY WARHOL]












[/ANDY WARHOL]

Originally Posted by umnitza

We've been working on it for a bit, and now, finally, it's on the car.
http://www.youtube.com/watch?v=fokTsyH8bTo

Information:
4 total modes (more later down the line)
* individual color selected (red/green/blue/yellow/amber/white/blue-white/purplish)
* individual colors fade between each other
* individual colors blink between each other
* locked in WHITE

Mode selection is done by switch, with lock out control for white mode (2 button).

Video was taken in the shade but at 3pm on a clear day.
pricing click this

Originally Posted by umnitza

ok, let's try to clarify this a little better.

This system has 4 modes.

1 Mode
Lock out White only - only blue button gives you white and it is on or off only.
If the blue button is depressed, the black button does nothing. If the blue button is released, the black button does all the controls.

2 Mode
If the blue button is released, the black button goes between modes (3 total for the black button)
Black button for mode 2 is any one single color that is available - and that color is constant and doesnt' chance unless you press the black button again.
So you get red, green, yellow, purple, orange, and blue x 2 shades (7 total colors).

3 Mode
The black button when it reaches the PURPLE color in mode 2, then goes to mode 3, which is a fade between all the colors that lets each color sit until it fades to the next every 4-6 seconds.

4 Mode
The black button when it is pressed again, goes out of mode 3, and then goes into flashing - pull my *** over - mode - something only useful for shows.

OFF Mode (NEW)
The black button when it is pressed for 5 seconds, will turn your angel eyes off completely. Then to turn them back on, press and hold for 5 seconds. Note, blue button will still work if the lights are turned off.

If the blue button is depressed, modes 2, 3, 4, or OFF are inoperable.
If you install/wire up the memory module, the lights will remember the last known color choice and revert back to that, as long as the blue button is released.