GD: Wilwood rear brake kit by KCmaxx and Fastbrakes
05-19-2011, 05:35 PM
#2
PRICES SET ARE FOR 04-08 MAXIMAS ONLY. THIS KIT WILL NOT WORK WITH THE OLDER MAXIMAS. THERE IS A KIT OFFERED BUT THE PRICE IS COMPLETELY DIFFERENT. PM ME FOR DETAILS.
Alright guys, the front Wilwood sale went extremely well so now its time to try the rears.
Kit will be as follows:
OPTION 1: $790 SHIPPED
(2) 4 piston Wilwood powerlite calipers, SS lines, custom relocation brackets, Hawk perf. pads, and drilled/slotted rotors with a lifetime warranty against cracks/warping. (rotors)
OPTION 2: $740 SHIPPED
(2) 4 piston Wilwood powerlite calipers, SS lines, custom relocation brackets, Hawk perf. pads, and drilled/slotted rotors. (NO LIFETIME WARRANTY)
There are 6 sets available for this deal. Brian has done some serious R&D since the front sale ended to make this happen.
These kits will use 12.7" 350Z rotors, custom made relocation brackets that will sit the new caliper in the OEM position and will still allow full Ebrake use.
I will accept $100 non refundable deposits to ensure a spot on the list just like last time, once all deposits are in and payments are made to brian then shipping will begin.
NOTE: Shipping could take time if Wilwood is out of calipers again, just a heads up.
This is first come first served, there may not be any other sets made if this doesnt work.
Here is a pic of a similar kit found on ebaY.
This kit is $900 shipped and puts the caliper on the opposite side of the rotor as the OEM placement.
THIS IS NOT THE KIT IM SELLING. PIC FOR COMPARISON ONLY.
This is a pic of the Powerlite calipers:
Rotors supplied with this deal will match the rotors offered in the front deal.
Heres a pic of OEM vs. new rotors:
New rotors are larger and vented.
Pics belong to Staggered357
I will check with Brian tomorrow to see if these will fit previous gens.
Please feel free to ask any questions you may have.
Mike
Alright guys, the front Wilwood sale went extremely well so now its time to try the rears.
Kit will be as follows:
OPTION 1: $790 SHIPPED
(2) 4 piston Wilwood powerlite calipers, SS lines, custom relocation brackets, Hawk perf. pads, and drilled/slotted rotors with a lifetime warranty against cracks/warping. (rotors)
OPTION 2: $740 SHIPPED
(2) 4 piston Wilwood powerlite calipers, SS lines, custom relocation brackets, Hawk perf. pads, and drilled/slotted rotors. (NO LIFETIME WARRANTY)
There are 6 sets available for this deal. Brian has done some serious R&D since the front sale ended to make this happen.
These kits will use 12.7" 350Z rotors, custom made relocation brackets that will sit the new caliper in the OEM position and will still allow full Ebrake use.
I will accept $100 non refundable deposits to ensure a spot on the list just like last time, once all deposits are in and payments are made to brian then shipping will begin.
NOTE: Shipping could take time if Wilwood is out of calipers again, just a heads up.
This is first come first served, there may not be any other sets made if this doesnt work.
Here is a pic of a similar kit found on ebaY.
This kit is $900 shipped and puts the caliper on the opposite side of the rotor as the OEM placement.
THIS IS NOT THE KIT IM SELLING. PIC FOR COMPARISON ONLY.
This is a pic of the Powerlite calipers:
Rotors supplied with this deal will match the rotors offered in the front deal.
Heres a pic of OEM vs. new rotors:
New rotors are larger and vented.
Pics belong to Staggered357
I will check with Brian tomorrow to see if these will fit previous gens.
Please feel free to ask any questions you may have.
Mike
Last edited by KCMAXX; 05-23-2011 at 08:25 AM.
Can't wait!
05-21-2011, 02:55 PM
#7
05-23-2011, 06:21 PM
#12
I did. This kit will only fit 04+ because of the ebrake setup.
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Mike
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Mike
06-12-2011, 09:55 PM
#16
06-17-2011, 03:55 AM
#19
I did. This kit will only fit 04+ because of the ebrake setup.
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Mike
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Mike
06-18-2011, 11:23 AM
#21
Let me point it out for you. In RED
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM KCMAXX for details. I am merely paraphrasing KCMAXX.
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM KCMAXX for details. I am merely paraphrasing KCMAXX.
Last edited by Tmars; 06-21-2011 at 01:43 PM.
06-18-2011, 05:41 PM
#22
Let me point it out for you. In RED
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
06-20-2011, 08:09 AM
#23
Their are 2 pages under rear Nissan brake kits on Fastbrakes.com. The pictures don't do the caliper any justice and the rotor is not displayed. But you will get a general idea of what your getting.
06-20-2011, 10:26 PM
#24
Let me point it out for you. In RED
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
Brian sells a kit for 4-5th gens but it runs 1400-1500. It uses a two piece rotor and a sinlge piston wilwood caliper with the ebrake built in. He said he could do the kit for $1100 shipped if 4 or more ordered. If anyones interested, PM me for details.
06-21-2011, 01:47 PM
#25
12-18-2011, 12:25 PM
#30
Don't mean to kill the thread op But I tried contacting via p.m and came up empty. Could you point me in the direction as to where I could pick up some FRONT brackets to get my wilwoods to work with my 4th gen?
12-19-2011, 06:07 AM
#31
Go on fastbrakes.com andcontact brian. He will tell you what you need... i got wilwoods on my 99 ..so im sure they sell the bracket
Thread
Thread Starter
Forum
Replies
Last Post
Huttig2009
5th Generation Classifieds (2000-2003)
8
09-25-2015 03:31 PM
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM
MAXSE5SPD
Other For Sale/Wanted
2
08-23-2015 12:06 PM