GD: 3rd gen CF hood and trunk by JoeBoost
04-06-2012, 03:11 PM
#1
GD: 3rd gen CF hood and trunk by JoeBoost
JoeBoost is hosting a GD on carbon fiber hoods and trunks.
this is probably the last time you'll get these pieces in carbon fiber.
Terms:
Min 5 pieces for hood or 5 pieces for trunk.
Prices:
Hoods - $650 Shipping $150
Trunks - $650 Shipping $150
Hood AND trunk - $1200 Shipping $200
Down payment:
$400 for 1 hood or 1 trunk
$700 for hood AND trunk (buying together)
Time:
Once Joe gets 5 or more unit it will take 6-8 weeks for the parts to be made and shipped out.
Contact info:
www.on-lineperformancegroup.com
(818) 248-7189
www.FastScions.com
Sample of their work:
Fog Lights
http://www.fastscions.com/scion-xb2-...light-kit.aspx
Bumper Cap
http://www.fastscions.com/carbon-fib...-2010-xb2.aspx
This GD is one time only.
All questions should be directed at Joe.
Thanks!
Dan
this is probably the last time you'll get these pieces in carbon fiber.
Terms:
Min 5 pieces for hood or 5 pieces for trunk.
Prices:
Hoods - $650 Shipping $150
Trunks - $650 Shipping $150
Hood AND trunk - $1200 Shipping $200
Down payment:
$400 for 1 hood or 1 trunk
$700 for hood AND trunk (buying together)
Time:
Once Joe gets 5 or more unit it will take 6-8 weeks for the parts to be made and shipped out.
Contact info:
www.on-lineperformancegroup.com
(818) 248-7189
www.FastScions.com
Sample of their work:
Fog Lights
http://www.fastscions.com/scion-xb2-...light-kit.aspx
Bumper Cap
http://www.fastscions.com/carbon-fib...-2010-xb2.aspx
This GD is one time only.
All questions should be directed at Joe.
Thanks!
Dan
04-06-2012, 05:33 PM
#2
Junior Member
Join Date: Jun 2006
Location: Springfield,Mo
Posts: 92
Of course as usual, I think I'm the only one who gives a damn anymore. Count me down for one of both. 
So do we need to get 5 people then pay?
So do we need to get 5 people then pay?
Last edited by DizZL3; 04-07-2012 at 02:21 AM.
04-08-2012, 02:11 PM
#4
Junior Member
Join Date: Jun 2006
Location: Springfield,Mo
Posts: 92
Well crap. Really doubt this is going to happen. We barely got any people in the actual 3rd gen forum. I really didn't even know this group section was here til the other day. I doubt any 3rd genners will bother to look here.
04-09-2012, 07:55 PM
#6
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
cmon guys. we know diz is down.
04-12-2012, 04:05 PM
#7
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
its go time . . buried or not
04-13-2012, 12:48 PM
#8
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
cmon 3rd genners, where r u??
04-17-2012, 09:20 AM
#11
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
FINALLY GOT QUOTED FOR FIBERGLASS!!!
prices for fiberglass versions:
$450/hood + $150 S/H
$450/trunk + $150 S/H
$800 if purchased together + $200 S/H
prices for carbon fiber versions:
$650/hood + $150 S/H
$650/trunk + $150 S/H
$1200 if purchased together + $200 S/H
prices for fiberglass versions:
$450/hood + $150 S/H
$450/trunk + $150 S/H
$800 if purchased together + $200 S/H
prices for carbon fiber versions:
$650/hood + $150 S/H
$650/trunk + $150 S/H
$1200 if purchased together + $200 S/H
04-17-2012, 11:04 PM
#13
Taking my Maxima to the Max!
iTrader: (3)
Join Date: Dec 2003
Location: Alachua, FL 32615
Posts: 1,096
Any chance they could modify the hood and/or trunk lid a bit if I wanted to do custom R34 Skyline tails and possibly headlight conversions? I guess fiberglass would be more modible.
04-18-2012, 08:15 AM
#14
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
i provided the carbon/fiberglass manufacturer with my oe hood and oe shaved trunk. they cannot modify it to make a custom one. That would be up to you.
$450 fiberglasss / $650 carbon.
also since the trunk is shaved there will be no keyhole on the trunk (just have to open from inside) and the coil springs that are attached to the trunk hinges will be too much pressure for the lighter trunk (cf or fg) so you need to remove each spring from each latch to prevent the trunk slingshotting open.
if i had like 10 people, we can talk about options. Right now we have only 2, so feel free to join the club.
$450 fiberglasss / $650 carbon.
also since the trunk is shaved there will be no keyhole on the trunk (just have to open from inside) and the coil springs that are attached to the trunk hinges will be too much pressure for the lighter trunk (cf or fg) so you need to remove each spring from each latch to prevent the trunk slingshotting open.
if i had like 10 people, we can talk about options. Right now we have only 2, so feel free to join the club.
04-19-2012, 04:47 AM
#15
Wish I could help, have been a bit busy with life for....I dunno, years. Why don't you guys branch out to other forums where maxima lurkers have hidden themselves? What with the pretentiousness of half of your current members, and arguing over semantics in the forums, you think we all stuck around here? 
Good luck, and if I win the lottery (or just pay the taxes I owe) I'll buy a set.
Good luck, and if I win the lottery (or just pay the taxes I owe) I'll buy a set.
04-19-2012, 09:04 PM
#16
Junior Member
Join Date: Mar 2012
Location: Los Angeles
Posts: 49
looks like we might have too . . just no action in here
05-08-2012, 07:16 AM
#22
I'd be interested in the fiberglass trunk. Any images? Are these going to require installaton of the oem deflector (name?). Or is the design so that the rear of the trunk is "stock" looking? Do these come pre-drilled for for spoiler?
05-12-2012, 08:27 AM
#25
Newbie - Just Registered
Join Date: Jun 2011
Location: Newnan, GA
Posts: 2
I'm in for a cf hood. Hopefully this will help get this thread a stay of execution.
Thread
Thread Starter
Forum
Replies
Last Post