NWP Engineering 5pc Phenolic Thermal Intake Spacers GROUP BUY! As low as $179 shipped
SubscribeQuote:
Thanks. Packages should be hitting mailboxes as early as tomorrow (Sat). If they don't show up on Saturday, you'll most likely see it on Monday.Originally Posted by Luisv8412
Got my tracking number this morning.. Can't wait to install now that I have the bop on and torque link.
Quote:
I'm sorry.Originally Posted by b3x02
oh nooooo! i misssed it! damn it!
Quote:
We should have more 5pc Phenolic Spacer Kits in stock by late next week. Let me know if you have any questions. Thanks!Originally Posted by b3x02
yeah i guess i will wait... i have cash that why
Junior Member
Quote:
ok sure i still down.. will fit my 2005 altima ser i know should be same as vq35deOriginally Posted by Aaron92SE
We should have more 5pc Phenolic Spacer Kits in stock by late next week. Let me know if you have any questions. Thanks!
Nice Deal Aaron. Hopefully you do something like this for the VQ30, and when you do, I'm down for yet another set...

Quote:
Yes, our Spacer Kit is the same between all 02-08 Maximas and the 02-06 Altima 3.5L.Originally Posted by b3x02
ok sure i still down.. will fit my 2005 altima ser i know should be same as vq35de
Quote:
Originally Posted by N!smo
Got it!
Quote:
Yes, I hope to set up a group deal for the VQ30 Spacers within the next few weeks hopefully.Originally Posted by The Wizard
Nice Deal Aaron. Hopefully you do something like this for the VQ30, and when you do, I'm down for yet another set...
Quote:
Originally Posted by ViRTualTeRRoRisT
Can I get a **** yeah????
Senior Member
just came in the mail today when i saw the box and it said nwp engineering on it i was like damnnn you even got cool boxes! lol the spacers look sooooo legit im excited for the install and i cant wait for my torque link to come!!! thanks so much aaron
p.s. ima try to convince my brother to get back into modifying so maybe hed pic up some spacers for his se-r
p.s. ima try to convince my brother to get back into modifying so maybe hed pic up some spacers for his se-r
Quote:
p.s. ima try to convince my brother to get back into modifying so maybe hed pic up some spacers for his se-r
Thank you.Originally Posted by MaxFiyah
just came in the mail today when i saw the box and it said nwp engineering on it i was like damnnn you even got cool boxes! lol the spacers look sooooo legit im excited for the install and i cant wait for my torque link to come!!! thanks so much aaronp.s. ima try to convince my brother to get back into modifying so maybe hed pic up some spacers for his se-r
Newbie - Just Registered
I got my package on Monday. All looks good and I even used my blue bottle opener already 
Thinking about installing spacers and plugs this weekend. Thanks Aaron.

Thinking about installing spacers and plugs this weekend. Thanks Aaron.
Quote:
Thank you!Originally Posted by 3.5_power
Hey Aaron thanks good stuff and fast shipping
Quote:

Thinking about installing spacers and plugs this weekend. Thanks Aaron.
Thank you. I love the bottle openers and can coozies. And let me know if you have any questions about the install.Originally Posted by Jason5291
I got my package on Monday. All looks good and I even used my blue bottle opener already 
Thinking about installing spacers and plugs this weekend. Thanks Aaron.
Newbie - Just Registered
I just installed these and new plugs yesterday. My engine noise is noticably louder when accelerating, especially from a dead stop. I hear the whistle especially when I let off the gas during hard acceleration, almost like a BOV. I am impressed with how cool the plenum temp has dropped, it is cool to the touch even after a spirited drive. It seems to growl from 1 - 2000 RPMs (this is where my concern is) then mellows out after that. Overall the engine just sounds much more aggressive. Is it common to have the engine noise increase that much? I torqued everything down to spec and am not throwing any codes so I do not think I have a leak anywhere...
2008 Maxima SE CVT Tranny
2008 Maxima SE CVT Tranny
Quote:
2008 Maxima SE CVT Tranny
Whenever you improve the airflow, the intake noise will change. It usually will get deeper and louder even if you still had the stock intake box and resonator. Installing a cone filter and changing out the intake tube will make it even louder and deeper.Originally Posted by Jason5291
I just installed these and new plugs yesterday. My engine noise is noticably louder when accelerating, especially from a dead stop. I hear the whistle especially when I let off the gas during hard acceleration, almost like a BOV. I am impressed with how cool the plenum temp has dropped, it is cool to the touch even after a spirited drive. It seems to growl from 1 - 2000 RPMs (this is where my concern is) then mellows out after that. Overall the engine just sounds much more aggressive. Is it common to have the engine noise increase that much? I torqued everything down to spec and am not throwing any codes so I do not think I have a leak anywhere...2008 Maxima SE CVT Tranny
But if your idle is nice and steady and you don't have any codes or other issues, then you do not have an intake leak. Please let me know if you have any more questions. Thanks.
Newbie - Just Registered
I connected the in/out coolant lines that were connected to the throttle body using your adapter, what do I do with the 2 areas where the lines clamped to the throttle body? They are now just open and sucking in unfiltered air...
Quote:
You did it correctly. Just leave those two fittings uncapped. They are used for coolant only, which flows through a water jacket in the Elbow. It is not used for the intake air. So you will not have an intake leak or suck in unfiltered/unmetered air.Originally Posted by Jason5291
I connected the in/out coolant lines that were connected to the throttle body using your adapter, what do I do with the 2 areas where the lines clamped to the throttle body? They are now just open and sucking in unfiltered air...
Quote:
We don't currently have any plans to do a Engine Torque Link group buy. They are currently on sale for $139.99 instead of $160. That price should stay the same all Spring and Summer more than likely.Originally Posted by The Duke of NY
Any chance on an engine torque link group deal? This is the last part i need for my spring upgrades!!
And you may ask for free shipping with the Engine Torque Link too with the promotion we're doing on this forum! So instead of $152.99, it'll only cost $139.99 shipped. But you have to ask for free shipping at the time you place your order according to the instructions in this thread.
http://forums.maxima.org/group-deals...now-stock.html
Senior Member
Thanks for the info.
Quote:
And you may ask for free shipping with the Engine Torque Link too with the promotion we're doing on this forum! So instead of $152.99, it'll only cost $139.99 shipped. But you have to ask for free shipping at the time you place your order according to the instructions in this thread.
http://forums.maxima.org/group-deals...now-stock.html
Originally Posted by Aaron92SE
We don't currently have any plans to do a Engine Torque Link group buy. They are currently on sale for $139.99 instead of $160. That price should stay the same all Spring and Summer more than likely.And you may ask for free shipping with the Engine Torque Link too with the promotion we're doing on this forum! So instead of $152.99, it'll only cost $139.99 shipped. But you have to ask for free shipping at the time you place your order according to the instructions in this thread.
http://forums.maxima.org/group-deals...now-stock.html
Quote:
I'm sorry, we don't have any plans to do another group buy with these Spacers anytime soon.Originally Posted by CauzinDrama
Any plans on doing this again anytime soon?
Quote:
Thank you for your business! A confirmation email with further information will be sent to you shortly. Thanks for posting!Originally Posted by CauzinDrama
Payment sent!!!!! Omg I can't wait.. I want my power back.
