When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Initial group buy release we need a minimum of 5 orders per type to put that specific type into production.
Initial deposit $800
Once headers are completed and ready for shipping remaning balance due $650
Type 1 =1995-2003 Maxima
Type 2 =2004-2006 Maxima with manual trans or 4spd auto
2002-2006 Altima 3.5L with manual trans or 4spd auto
Type 3 =2004-2006 Maxima with 5spd auto
2002-2006 Altima 3.5L with 5spd auto
Type 4 =2007-2012 Altima 3.5L
Type 4.5 =2009-2014 Maxima (should be same as type 4 but need to verify)
Specifications:
- Head flange Made from 1/2" thick steel
- CNC machined for a smooth transition from exhaust port to primary pipe
-1 7/8" Primary runner size
-Equal length primaries
-Formed collector with spike
-2.5” collector
-2.5” equal length ypipe
-3” ypipe out to catback flange
-Vband flanges on headers and ypipe (2bolt flange on rear of ypipe to bolt to catback)
-Fully TIG welded
-Constructed from 16 gauge mild steel
-Manufactured here in house
-JETHOT Classic Ceramic coated (inside and outside)
-JETHOT color top coats available (additional charge)
We tested these headers back to back against ebay headers. Testing was done on the same day, same dyno, same car, same conditions! This is a true back to back test!
We have not tested our headers against stock exhaust manifolds, that test would show very large gains.
First car 2004 Maxima w 2010 Maxima engine, 350z ecu stock cams. showed gains in midrange and top end. 10hp and 4ftlbs tq.
Second car 2006 Altima SER with 2010 Maxima engine with JWT Cams showed gains above 4000 rpm 14hp and 10 ftlbs tq.
We are a small Maxima/Altima performance focused shop. Manufacturing these headers in house, this first production run lead times will vary depending on the number of orders.
03-09-2018, 05:55 AM
Now those are a proper set of header! 
