They will be available soon!

I expect to have some pics tomorrow

 

bump

 

The pics of the new two piece rear valance are now up, they are at the bottom of the next page: http://www.ionicdynamics.com/Galery.html

Group deal price is set at 120+shipping.

 

hmm
mine get here in about 5 days, I will post some pics, on my lowered maxima
I also have the stillen sides so we will see how that mathes up

 

i think i will get the side skirts and the 1 piece rear valance. if i get the rear with the opening for the muffler, what i the radius of the opening including the one thats already in the bumper. could i get a 2" pipe through there?
thanks

grounded

 

Yes definitely! 2" in diameter or radius? I had a 4" diameter exhaust tip and it fit perfectly!

Regards!

 

Will this fit the 95/96 Maxima rear? It appears that it's set up for the length of a 97-99.

 

will the rear fit my 96? if so how much is it?

 

No, they will not fit the 96's. Ionicmax is currently working on the 96 one-piece and two-piece rears.

The price will be $120 plus shipping for the rears, just as Ionicmax stated.

Hmm....I wanna be a PR guy....I think I'll go apply for a different job now.

 

I'm interested in this deal but when is the deadline and who do I talk to about it. Do I just contact ionic dynamics and mention the group deal?


Max99

 

The deal is ongoing untill further notice (its on for a long time, no deadline yet). You can talk to "ionicmax" on this forum by Private Messaging him, or you can goto http://www.ionicdynamics.com/ and order there. He is currently accepting cash/check/PayPal.

 

hmm thats a nice pic of the gurl in the sig, the full pic is much better

 

Damn, they do look good, where's the actual pic

 

im me and maybe I will send you the link. Thats if I can find it.

 

Thanks Kashoggio!!

THose two ladies are BEAUTIFUL! I mirrored the page where I got the pix from on my HD, so I dont have a link. But if you can send me a link with more pix of them, I would appreciate it

I have 2 sets of pix of them, I must say those two women are freaking amazing looking.

I had to spice up my sig so I plastered the "acceptable" part one of their pictures...

 

nice pic of the girlies
got a link to the pics??
just wondering how the rear piece for the 95-96 is going.

BUMP

 

bump

 

Update: Things have not gone as planed for the 95-96 rear valance. Last week I had some problems with the owner of the 1995 maxima that we were working on. She just decided that she didn't want to lend us her car any longer, the car had only been at the shop just a couple of days .

Since I have a friend that has junk yards he is going to get a 1995 maxima hit in the front and lend it to me so we can work on the rear of the car. This will be sometime in the middle of the week. The good thing is that the two piece rear valance was almost finished, we only need to line up the rear part for right contour, the one piece rear valance is going to be harder and we are still unsure if we are going to have it available for the 1995-1996 maxima.

The group deal is going strong, and we are still taking orders!

Thanks!

 

Sounds good to me. I was more interested in the two piece anyway

 

so does this mean there may not be a piece for the 95-96 rear?
will it just take a little longer than expected?

 

ok, i got my two piece rear today, and so far I am very happy with it. I test fitted them today, and they fit great! The pics of the rear does not do them justice. The fiberglass is thick and is very well made. Tomorrow I am going to get a quote of the paint and I will post pics as soon as I can.

 

Wooohoo! Congrats Kashoggio! I can't wait to see your pix!

How well do they line up with the rest of your stillen kit?

 

pretty good, I was really shocked that it looks really nice with my stillen sides. I am just sittin here thinkin about them on my car, and I smile... I need help

 

How long was the wait after you ordered them? Just curious

 

well i orginally ordered the full one, but we decided that it was going to be too low because I am lowered, so when the two piece rear was done, i waited about 5 days.

 

i might lower my car some point after i eventually get these sides and the rear. is the rear the only thing i have to worry about (besides the stillen lip up front i'm guessing ) ? i won't be going any lower than 2 inches. i would do it just to eliminate the wheel gap after putting rims on.

 

Which springs are you using? From looking at the pictures, anything lower than Intrax would be too low. I believe Intrax have a 1.75 drop. I'm on Eibach/Tockico and I scrape when going over certain things even with their claimed 1.5 drop.

 

ok here is a pic, of me going in ot my driveway
http://communities.msn.com/_Secure/0.../lower-005.jpg
but I am lowered with Eibachs, and i do scrape the front and the rear is low enought in certain driveways. I would be hitting if I had the full rear. The sids are nothing to worry about

 

i wonder if i could get the full back being that though i have sprints, my back sits much higher than my front, i can hardly clear the driveway as i am now, not to mention when i put the lip on which is just sittin in my room

 

You will absolutely not be able to get onto your driveway. 100%.

Oh by the way, the rear piece for your car is not ready yet...

But you know, you could take a chance...just be sure to have backup money if your rear piece gets ripped off on a speed bump.

 

As mozy said you will probably have clearance problems if you use the one piece rear valance on a lowered max. The one piece rear valance for the 95-96 max is going to take longer than expected, the two piece should be done this week, depending on the weather and time available.

I'll try and keep everyone posted

Thanks!

 

I really hope that the 95-96 rear pieces look much better then the 95-96 stillen rear pieces.. I think allot of people would agree with me on this one. The 95-96 stillen rear pieces barely look like the rear pieces to a kit. When you look at it from behind you can barely tell there is a kit on the car..

Thanks,
MIKE

 

Yeah, I noticed that as well. I'm thinking that the rear section for the 95/96 will resemble that of the 97/99 rear section 2 piece.

 

That would make me very happy and save me some money since i wont have to do the 95-96 to 97-99 rear bumper conversion.


[QUOTE]Originally posted by SmoothMax
Yeah, I noticed that as well. I'm thinking that the rear section for the 95/96 will resemble that of the 97/99 rear section 2 piece.

[/QUOTE

 

bump

 

Doesn't a Max wit 18's actually raise up the car a bit. So if I get 18's and lower it with something like AGX and Maxspeed or H&R's ( I really haven't looked into this part yet ) would I have clearance problems with the one or two piece rear and even the stillen lip for that matter.

 

i look back at this thread everyday and just want to shoot myself...IF i wasn't getting the dam conversion, i would have bought these so quick man....dam some good prices

 

I emailed ionic tonight - looking to buy 2 piece rear (I'm 96 on eibach/tokiko) without hole and sides - hope they come out soon.
Can anyone post cost to mount (did you mount yourself?) and paint these things? And is there any good alternatives to Stillen front (nice but $$$)? I feel less guilt buying since I've got pretty good dings in my front and rear bumpers anyway. Mozy - what kinda front you got?

 

It's either a stillen lip or an entire front bumper in which the stillen lip is obviously gonna be cheaper. Other alternatives are the Sarona kit($$$$), the erebuni kit($$$) or the skyline kit($$$$$) There's one other but I'm not familiar with the name.

 

The total cost for me to get my sides and rear to be installed was $600. Yes that seems like alot, but you can shop around, I found cheaper prices but decided to go with these guys cause they gave me a waranty.

My front is just the stillen lip.