I think its more of a limited time sale, rather than a GD. Who cares though $115 shipped is pretty good.

 

I'll be giving you guys a call on Tuesday

 

Talked with Lori today. Ordered my ADDCO! Looking forward to slamming it on my ride.

I'll let ya'll know how it goes



Mike

 

Mike, what method of shipping is Cattman using and were they able to declare your package at a lower cost? If you're using USPS is that with EMS(tracking # included)? Also, when did they say they would ship out your bar?

Nathan

 

Who cares? It's a good deal, I hope as many people get in on it as possible.
I got mine within 5 days. It came UPS, no tracking number or shipment confirmation. Normally I don't like that, but Cattman seemed to have a pretty good reputation on here.

 

Just because its on the group deals forum doesn't mean its literally a group deal. No, its just a pretty good sale, I'm not that fond of real group deals.

But hey, I'm flexible and can make it seem like a group deal for anyone that would prefer. Go out and get a money order and send it to me by mail (write "group deal" on the back of the envelope). Then I'll sit on it for a couple of weeks while you wonder if the letter got lost, then send you the bar. Or maybe I'll wait six weeks, whatever.

Then it would seem just like a lot of the group deals I read about.

But I think most will just want to call the order line, pay with a CC and have it sent straightaway (and if not in stock you don't pay till they're shipped).

Brian C Catts
Cattman Performance

 

Finally got mine! Had to wait a few weeks thru the back order, but it's on now! Very easy install. The bushings are sliced diagonally from the corner to the center, so sliding them on the bar is easy. Didn't have to remove any lines or brackets. Just need a set of ramps and a deep 14mm (or 9/16") socket wrench. I left 1" of bar from the trailing arm bushing to the end of the bar. The instructions say expose more bar to tighten the ride. What have others set at? Also says the trailing arm bracket should be in the center. Mines to the rear and "tightening" would move it further back. Oh, mines a '97 SE 5 spd.

Thanks Cattman!!!!!!!!
Enjoyed doin' bidness wit ya!
Now I'm enjoying the ride!

 

Hey Nathan,

I decided I wasn't going to worry about all that extra stuff, knowing full wel I'd get nailed anyways. I factored all that **** in to the cost (shipping, duty), and said fine by me.

I'm expecting a shipping # etc. to be emailed to me when they send it out, but didn't ask about expected delivery date or anything. '

Was busy, so didn't ask some of the important questions. Ah well. I'll let you know all that junk when I find out.

Mike

 

is the deal still on?

 

just give them a call...

i think it's stil on b/c ordered mine not too long ago and just got it and installed it... it's sweeeeeeeeeeet..

 

Thanks for the great price Brian and I have to agree with some on this forum the sway-bar is a must have upgrade.

 

My came in today that was quick thanx man great price and quick delivery .

 

it's been installed... and it's just wonderful.....

yes it is the best $115 for car mod that i have spent....

 

oh come on!!!.. I missed the last group deal, and now i cannot even getin on this one! 3rd gen owners want the rsb, i mean why cant we get into the gd. I will be missing out this one also, why me!! if your not seeling b/c of the problem, its ok with me, i still willing to get it for this price... so far there are about5 more 3rd geners and possibley more out there. can we get in, pretty pretty please, with turbo charger on top...

 

I'm kinda late, but this is a good price. Is this GD still on (I read that they are on back order). If this is still on, I'm in. Just let me know.

 

give them a call and find out... it's great deal if they still have it...

 

We got about a dozen in stock now, after they're gone, its probably over.

Brian

 

I'll contact you today. I want one.

 

Ordered mine today. Can't wait to get it.

 

heeey... i placed an order for mine on i think 8/19. will i get one or no??

 

Hi cattman,

I placed my order on August 2, Lori, a very nice lady, told me it should arrive around Aug.6~8, but it didn't. I called again on Aug. 13, she gave me a tracking # and was told should arrive on that day but it didn't. I tracked it on Aug. 15, found out she gave me a wrong tracking # cuz it has been delivered to somewhere else. So I called the next day which is Aug.16. She told me there is somewhat mistake and should arrive on aug.19~20. It's Aug.22 today and I have not got my RSB...

Could you help me out? I was charged on Aug.8.
Thanks!

 

Lets just stop and think for a moment. Based on the information associated with your message here, I know your forum name is mightima, but nothing more. Unless your actual name is mightima, I don't have the slightest idea who you are, so I can't tie it to any sale or determine what the problem is.

Generally speaking, its far more effective to communicate with me directly about an issue that needs to be resolved in a timely way. My email is at the bottom of every post I make, its on my website, and its available from the folks at my ordering service. This is about the last place I'll notice a message, because I just don't have the time to monitor the forum; wish I did, but I don't.

Just to be absolutely sure you've got it, write to bcatts@cattman.com. Tell me who you are, and I will be on this issue like a rash.

As you will note, there is a long string of comments from pleased customers about how quickly their bars arrived, so we've apparently got a lost package out there somewhere.

Brian C Catts
Cattman Performance

 

Order mine today.. suppose to be shipped on monday..
can't wait

 

ordered mine today also! can't wait!!! hope it goes on easy enough and comes soon, going to school in two weeks.

 

if the GD still on,if it is,count me in,my name is Frank,email me if it's still on thanxxx,pquachtx@hotmail.com if it fit 95-03 then i want 2 set thanxxx

 

Not sure about inventory at my fulfillment center, so just call on Monday morning and they can let you know either way. Call 800.795.1513 between 8-5 MST, weekdays.

Brian C Catts
Cattman Performance
bcatts@cattman.com
www.cattman.com

 

How many do you have left? If you can hold off for a couple of weeks until I get rid of my kit, then maybe I'll get one for my 95 GXE.

 

Its after hours so I can't check inventory, but I know for sure that I'll be out quite soon. May do this with one more batch if I can get the price I need to make the deal.

Will look into that tomorrow.

Brian

 

i already call and placed my order today,thanxx!

 

i still cant belive that 3rd gen owners get no love.... its just not right or fair.. there are many of us out there.. besides we are the elderly car that needs support.. cough cough

 

Yeah, I'm with ya. But I guess I'll just have to go to another vendor and get the Suspension Tech stuff.

 

Let us know if you get some more in at that price. I just called and they said you were out. How long does it take you to get them in? I really want to get one a.s.a.p

 

Just got mine today...
didn't even take it upstairs... went right on to the car.. havn't test it out fully yet.... took me about 2 hours, since I don't have a ramp.. one of the U bolt didn't fit so well, but a little hammer... everything fits...

 

got mine in a few days ago right on time. thank you very much for good price and prompt shipping. hopefully everything goes well for install but i'm sure it will. thanx again!

 

Got mine at work on Friday but I was off. Someone from work brought it to my house. I'll do my install tomorrow since it's a holiday and all. I'll let you know then. Thanks for the deal and for the quick shipment.

 

Put it on today. It took about an hour & included jacking the car up & taking off both wheels. On the first curve of my test drive, I didn't like the way it felt...kinda like I had less traction in the rear. I guess it just takes a minute for the bar to get seated right because in all of the rest off the curves, the car was begging me to push it harder. Great deal for the money. I feel like you glide around curves now. Thanks.

 

I would advise not taking the wheels off. The install is easier, and works better (noting your initial experience in the first corner), if you put the back wheels up on ramps. You should have weight on the rear axle, not have it hanging, to install this properly.

Its been years since I installed mine, but I think perhaps this is mentioned in ADDCO's somewhat primitive installation instructions.

I'd strongly advise checking the tightness and position of all your fasteners.

Brian C Catts
Cattman Performance

 

anymore lefT?

 

I expect to have a few more by the end of this week or beginning of next. Wouldn't be a bad idea to place an order so you're in line. We don't charge the CC until we ship.

Brian C Catts
Cattman Performance
800.795.1513

 

Thanks. Yeah, I did use jack stands to install so the rear wheels were just hanging. I'll pull it up on the ramps today and double check it. It feels good though.