My Rims [56K XXX]
#10
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Jersey City, NJ
Posts: 1,225
Thanks for the comments everybody. I'm so happy with these. Finally, was able to get them after waiting so long.
Yeah, the ride is harsher , but honestly for 19's dropped on S-Techs it isn't that bad at all. I mean, don't get me wrong it's not COMFY, but it isn't horrible by any means. I think what helped is the 40 series tire instead of 35. I'm glad it fit fine.
Thanks again guys.
Yeah, the ride is harsher , but honestly for 19's dropped on S-Techs it isn't that bad at all. I mean, don't get me wrong it's not COMFY, but it isn't horrible by any means. I think what helped is the 40 series tire instead of 35. I'm glad it fit fine.
Thanks again guys.
#15
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Jersey City, NJ
Posts: 1,225
Originally Posted by RicoSuave98
damn that whole car is ****** hottt. nice rims man. what they run ya? thats exactly the kinda shiit i been lookin for
Thanks cefiro & Mike as well.
#16
Originally Posted by i30ds
Now you gotta paint those calipers.
SY
sycefiro@yahoo.com
#17
Originally Posted by SYCEFIRO
#18
Originally Posted by i30ds
And what plans would those be??? Gimme somethin good!
Cefiro Dual Piston Front Caliper & JDM WINMAX front brake pads
13.3 Inch Big Brake Rotors w/ adaptor
Perfect fit for 4th Gen Nissan Maxima/A32 I30
For less than U$1,000.00
If you are Interested in this set up, you can grab it before I hand it over to Mike.. I haven't shown him yet. LOL.....
#20
Originally Posted by SYCEFIRO
Hey Devin,
Cefiro Dual Piston Front Caliper & JDM WINMAX front brake pads
13.3 Inch Big Brake Rotors w/ adaptor
Perfect fit for 4th Gen Nissan Maxima/A32 I30
For less than U$1,000.00
If you are Interested in this set up, you can grab it before I hand it over to Mike.. I haven't shown him yet. LOL.....
Cefiro Dual Piston Front Caliper & JDM WINMAX front brake pads
13.3 Inch Big Brake Rotors w/ adaptor
Perfect fit for 4th Gen Nissan Maxima/A32 I30
For less than U$1,000.00
If you are Interested in this set up, you can grab it before I hand it over to Mike.. I haven't shown him yet. LOL.....
I am little short on funds right now since I am in the middle of finalizing parts collection for my conversion (just got the fidanza flywheel in and I just ordered some raxels high performance axles ), so I guess I am wondering if you will be getting more Cefiro kits in the future?
#21
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Jersey City, NJ
Posts: 1,225
Might sound like a stupid question, but there are 4 of these correct? It's not just for the Front right? Just curious, cuz that would make no sense...but that's what I'm gettin as I re-read the post.
#22
Originally Posted by Max Mutes
Might sound like a stupid question, but there are 4 of these correct? It's not just for the Front right? Just curious, cuz that would make no sense...but that's what I'm gettin as I re-read the post.
Talking about the BIG BRAKE? Only for the front two... sorry.. nothing for the rear. As the rear brakes are mainly for the parking brake and assisting the front brakes. The photos you've seen are just two different photos of the same rotors.
SY
sycefiro@yahoo.com
#27
I hate to hi-jack this thread, but I've just found out that new members with less than 15 posts can not start their own thread(???). Anyways I'm a new I30T owner. I'm having some problems picturing what I want this car to look like. I'm going to take step down from my ***** to the wall modding and just do a few things. I want to lower the vehicle. I want to throw some rims on the vehicle. I'm going to add my own subs. If possible I'm going to change the grill to the horizontal one I've seen in some pics on cardomain. For lowering I'm seriously considering the tein's that give the highest amount of drop. I believe it's 2.2/1.6. Problem is I can't really picture how this would look and I can't find many max's/i30's with these springs. Also with the narrowness of this vehicle I'm having a hard time deciding on the type of wheel to get for it. I need suggestions. I don't need the end all answers just some suggestions on the type of wheels(offset, spokes, lips) that make these rides stand out.
If someone could put this into a new thread and title the thread 'New Member wanting to say HI!'
If someone could put this into a new thread and title the thread 'New Member wanting to say HI!'
#29
Originally Posted by Max Mutes
umm my car has S-Techs? Search through the pages and you'll also find more pics before I had my rims as well.
#30
Originally Posted by Max Mutes
umm my car has S-Techs? Search through the pages and you'll also find more pics before I had my rims as well.
#31
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Jersey City, NJ
Posts: 1,225
Originally Posted by falconey
So the s-tech's are the biggest drop? I get them mixed up with the h-tech's so.... Anywho I love the look of your car, but I guess I was hoping with 18's and the 2.2/1.6 I could have a nice lil tucked look. It seems even with 19's your wheels don't really tuck. That's slightly disappointing, because I did want a slight tuck and I don't want 19's($$$).
#34
Originally Posted by klschulte
you done pimp'd your own ride. way to go brother. no for some of them there curb feelers and a 40 oz.
Just kidding. Looks nice if you like that stuff
Just kidding. Looks nice if you like that stuff
Thread
Thread Starter
Forum
Replies
Last Post
0m3nc0w
4th Generation Maxima (1995-1999)
3
09-11-2015 05:21 PM