TSX Retro In Cefiros
#1
TSX Retro In Cefiros
Anybody up for the task? I have the cefiros I haven't had them more than 9 months. I don't want to risk messing something up ive never done before. Anybody in the INDY area willing to help. Just let me know and we will make some dates.
#3
Isn't that a girl's name?
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (17)
Join Date: May 2003
Location: CT. 97,99,02,i30,03,07
Posts: 970
Avoid HomerMAC like the super aids, that dirtbag stole my OEM headlights. Theres a thread about it in Buyer/Seller Feedback so I won't delve into it here.
Check out the forums at HIDplanet.com, and there are other members here with better retrofit reputations.
Check out the forums at HIDplanet.com, and there are other members here with better retrofit reputations.
#4
If anything I would recommend the following:
A) Someone with a lot of retrofit experience (if doing it remote)
B) Someone with a A32
C) Someone local
I recommend B over A, mostly because the retrofitter can then test the aim of the headlights on the car before sending them out. Experienced retrofitters have their ways of getting around that, but it still might take a few tries to get it just right.
I recommend C if B and A don't work because with someone local they can actually fit the lights onto your car and check the aim, etc. firsthand.
A) Someone with a lot of retrofit experience (if doing it remote)
B) Someone with a A32
C) Someone local
I recommend B over A, mostly because the retrofitter can then test the aim of the headlights on the car before sending them out. Experienced retrofitters have their ways of getting around that, but it still might take a few tries to get it just right.
I recommend C if B and A don't work because with someone local they can actually fit the lights onto your car and check the aim, etc. firsthand.
#6
I did this awhile back... you can do it, just take your time!
http://forums.maxima.org/showthread.php?t=438730
http://forums.maxima.org/showthread....57#post4462257
Let me know if you do try it or need any help!
Grant
http://forums.maxima.org/showthread.php?t=438730
http://forums.maxima.org/showthread....57#post4462257
Let me know if you do try it or need any help!
Grant
#7
Actually Meta, if you are able to level the headlight, you can adjust/measure the beam with a torque level. I really suggest you DIY, it is not too difficult and there is plenty of help around. Experiences retrofitters guarantee quality, but they do charge for it.
#8
Originally Posted by n3985
Actually Meta, if you are able to level the headlight, you can adjust/measure the beam with a torque level. I really suggest you DIY, it is not too difficult and there is plenty of help around. Experiences retrofitters guarantee quality, but they do charge for it.
What I mean is that you need to get the projector level relative to the original beam pattern. You can't always go by the floor of the headlight or reflector as being level. I suppose you could light up the headlight in its stock state, mark the beam pattern on the wall, then try to position the headlight precisely in the same spot in precisely the same way it was after you've retrofitted the projector and see if it lines up, but to me that just seems to leave too many opportunities for variation to occur.
But I do agree. DIY is fun and informative. Just takes some time and patience.
#9
Originally Posted by NCSU_MAX
I did this awhile back... you can do it, just take your time!
http://forums.maxima.org/showthread.php?t=438730
http://forums.maxima.org/showthread....57#post4462257
Let me know if you do try it or need any help!
Grant
http://forums.maxima.org/showthread.php?t=438730
http://forums.maxima.org/showthread....57#post4462257
Let me know if you do try it or need any help!
Grant
#11
Kinda off topic but the clear headlights like yours (97lude) but what years are those from? Becuase my headlights are the frosted and i recently sold those to a junkyard for a new dash. Where could I possibly get the clear ones?
#12
Originally Posted by OnEBadAsSi30
Kinda off topic but the clear headlights like yours (97lude) but what years are those from? Becuase my headlights are the frosted and i recently sold those to a junkyard for a new dash. Where could I possibly get the clear ones?
#15
I've bought most of my 5spd. swap parts from the Nissan dealership here in Indy. But those are little things like the clutch pedal, slave cylinder, and bolts....oh yeah and a flywheel
I'll look around and see what I can find. ANybody have any special website besides Ebay where they have found some?
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#18
We don't have inspections here....and if you have the tsx's theyres plently of light just look at 97ludes right up and his pictures at night. freakin sick. Hey N3985 I go down to bloomington every once a while to chill with my friends. Do you have any knowledge of doing this kind of stuff?
#21
Originally Posted by MaximaExposure
He IS 97lude ![Tard smash](https://maxima.org/forums/images/smilies/smashfreak.gif)
n3985 also has a huge long thread about his A33 retrofitting project![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Tard smash](https://maxima.org/forums/images/smilies/smashfreak.gif)
n3985 also has a huge long thread about his A33 retrofitting project
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Tard smash](https://maxima.org/forums/images/smilies/smashfreak.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM